
MT3608
- Size
- 17.7 × 19.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 8
- Pads
- 29
- Tracks, vias
- 22, 0
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 19 Jan 2022
- Updated
- 22 Sep 2026
Overview
MT3608 is an open-source printed circuit board by Heorenmaru, from the Heorenmaru/Hardware repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 17.7 × 19.6 mm with 16 parts on 8 nets, routed with 22 tracks and 0 vias.
It is built around the MT3608. Its parts include 3 resistors, 2 capacitors, 1 IC, 1 diode and 1 inductor.
Main components
1README
README.mdHardware
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R4 |
| 2 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3 |
| 2 | ~ | TestPoint:TestPoint_Pad_D1.5mm | Vin, Vout |
| 1 | D | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
| 1 | EN | TestPoint:TestPoint_Pad_D1.0mm | E1 |
| 1 | FB | TestPoint:TestPoint_Pad_D1.0mm | FB1 |
| 1 | G | TestPoint:TestPoint_Pad_1.0x1.0mm | G |
| 1 | GND | TestPoint:TestPoint_Pad_1.5x1.5mm | GND |
| 1 | L | Inductor_SMD:L_10.4x10.4_H4.8 | L1 |
| 1 | MT3608 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | Sh1 |
| 1 | ~ | TestPoint:TestPoint_Pad_1.5x1.5mm | Gout |
More from Heorenmaru/Hardware
4- 2 layers55.3 × 35.9 mm

- 2 layers30.4 × 25.2 mm

- 2 layers39.9 × 30.6 mm

- 2 layers26.7 × 11.7 mm

Similar boards
- 2 layers92.8 × 71.8 mm

USBSID Pico v1.3f
LouDnl/USBSID-Pico
USBSID-Pico is a RPi Pico (RP2040/W RP2350/W) based board for interfacing one or two MOS SID chips and/or hardware SID emulators over (WEB)USB with your computer, phone, ASID supporting player or USB midi controller
116 parts125GPL-2.0 - 2 layers100 × 85 mm

- 2 layers308.7 × 241.8 mm

OTTOtact
cester-ino/OTTO-hardware
those specs refer to the tactile buttons version, but a led backlight button version is in the works too.
229 parts49GPL-3.0 - 2 layers89.6 × 79 mm

TDR 5351 core
MR-DOS/TDR_diploma_thesis
Time domain reflectometer. Includes Hardware, firmware and GUI in Octave. Also a diploma thesis.
199 parts33GPL-3.0 - 2 layers79.2 × 68.8 mm

Environment slave
pcbcupid/Lora-Wireless-Sensor-Network
A wireless sensor network based on Lora and esp32C3. This repo will help you build a complete product from scratch to finish!
72 parts30MIT - 4 layers83 × 83 mm

PWNSAT
Pwnsat/PWNCUBE
PWNCUBE v1.0 is a Cubesat hardware based platform for aerospace cybersecurity research
139 parts29 - 4 layers142.3 × 105.7 mm

Qmtech minimig
ranzbak/qmtech_minimig
KiCad design for a minimig compatible board for the QM_XC7A100T_DDR3 board.
222 parts24 - 2 layers80 × 36 mm

Freepdk
pacmancoder/easy-pdk-mini
Padauk MCU programmer variant for hand soldering.
60 parts21CC-BY-SA-4.0
Questions
How big is the MT3608 PCB?
It measures 17.7 × 19.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MT3608 use?
16 parts, built around the MT3608. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MT3608 KiCad files?
From the Heorenmaru/Hardware repository on GitHub, at the commit this page was made from: the board is VRTrackerPOWER/MT3608/MT3608.kicad_pcb and its schematic Geiger/geiger/geiger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MT3608 design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).