

Cherry Ref OBC
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 47
- Pads
- 135
- Tracks, vias
- 29, 5
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 21 Feb 2023
- Updated
- 26 Jun 2026
Overview
Cherry Ref OBC is an open-source printed circuit board by HelloItzAlex, from the HelloItzAlex/KiCAD-Designs repository on GitHub. It is a 2-layer board with 31 parts on 47 nets, routed with 29 tracks and 5 vias.
It is built around the SN65HVD230D, MMC5983MA and MS560702BA03-50, with the BMI088 among its other parts. Its parts include 14 capacitors, 6 ICs, 5 connectors, 3 resistors and 2 switches. It belongs with the STM32 boards of this library.
Main components
4SN65HVD230D
SOIC-8-40℃~+85℃ 1 17mA 1Mbps 370uA 3V~3.6V CAN Transceiver Low-power mode、Wake-up function、ESD protection、Thermal shutdown protection、Bus fault protection、Hot-swap protection SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversMMC5983MA
LGA-16(3x3)-40℃~+105℃ 18bit 2.8V~3.6V 450uA I2C、SPI ±8Gs ±8Gs LGA-16(3x3) 3D Magnetic Sensors ROHSMEMSIC3D Magnetic SensorsMS560702BA03-50
SMD-8P-40℃~+85℃ 1.5mbar 1.8V~3.6V 140nA 1Kpa~1.2bar I2C、SPI Yes SMD-8P Pressure Sensors ROHSTE ConnectivityPressure SensorsBMI088
LGA-16(3x4.5)-40℃~+85℃ Accelerometer Gyroscope LGA-16(3x4.5) Accelerometers ROHSBosch SensortecAccelerometers
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100nF | Capacitor_SMD:C_0402_1005Metric | C12, C13, C14 |
| 2 | .1uF | Capacitor_SMD:C_0402_1005Metric | C1, C6 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C5, C10 |
| 2 | 20pF | Capacitor_SMD:C_0402_1005Metric | C4, C8 |
| 2 | 60 ohm | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 2 | Bat | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical | J1, J2 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C11 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 4.7nF | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 4u7 | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | BMI088 | BMI088:PQFN50P450X300X100-16N | U5 |
| 1 | CAN Header | Connector_PinHeader_1.00mm:PinHeader_1x04_P1.00mm_Vertical | J5 |
| 1 | DEBUG | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical | J4 |
| 1 | ECS-2520MV-xxx-xx | Oscillator:Oscillator_SMD_ECS_2520MV-xxx-xx-4Pin_2.5x2.0mm | X1 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | MMC5983MA | MMC5983MA:PQFN50P300X300X100-16N | U6 |
| 1 | MS560702BA03-50 | MS5607:SON125P300X500X100-8N | U4 |
| 1 | PWR | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical | J3 |
| 1 | SN65HVD230 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | STM32F042G4Ux | Package_DFN_QFN:QFN-28_4x4mm_P0.5mm | U2 |
| 1 | SW_SPDT | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | SW1 |
| 1 | SW_SPST | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | SW2 |
More from HelloItzAlex/KiCAD-Designs
12- 2 layers190.5 × 279.4 mm

- 4 layers57.2 × 57.2 mm

- 4 layers57.2 × 50.8 mm

- 4 layers57.2 × 57.2 mm

- 2 layers57.2 × 101.6 mm

- 4 layers44.4 × 57.2 mm

- 2 layers57.2 × 57.2 mm

- 4 layers20.3 × 31.8 mm

- 2 layers50.8 × 254.2 mm

- 4 layers22.9 × 50.8 mm

- 2 layers50.8 × 50.8 mm

- 4 layers20.3 × 38.1 mm

Similar boards
- 6 layers90 × 45 mm

Hw tele stern
shorlee/TeleSTERN
The TeleSTERN Project is an Open Source Rocketry Flight Computer based on the TeleMega by Altus Metrum.
303 parts3GPL-3.0 - 4 layers31.8 × 38.1 mm

- 4 layers33 × 90 mm

Active drag system
RocketryVT/active-drag-system
Eigen Library, cmake, and arm-none-eabi-gcc tooling required for successful build.
100 parts6MIT - 4 layers31 × 100 mm

Kp ptr
PTR-projects/PTR_mega_hardware
Welcome to the KPPTR-hardware repository! This repository contains the design files for the hardware components used in the KPPTR project.
208 parts3MIT - 4 layers60 × 60 mm

- 6 layers150 × 100 mm

- 4 layers88.4 × 62.4 mm

- 6 layers29 × 29 mm

Questions
What parts does the Cherry Ref OBC use?
31 parts, built around the SN65HVD230D, MMC5983MA, MS560702BA03-50 and BMI088. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cherry Ref OBC KiCad files?
From the HelloItzAlex/KiCAD-Designs repository on GitHub, at the commit this page was made from: the board is Cherry_Ref_OBC/Cherry_Ref_OBC.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cherry Ref OBC design in my own project?
Its repository states no licence, so its author keeps all rights: ask HelloItzAlex before reusing the design.