
Blinky
hdsjulian/sparkles-old
Autonomous blinky devices that triangulate via soundd

This repo theoretically contains everything to build, assemble and run the sparkling forests light installation.
Blinky is an open-source printed circuit board by hdsjulian, from the hdsjulian/sparkles repository on GitHub. It is a 2-layer board of 43 × 64.5 mm with 72 parts on 94 nets, routed with 885 tracks and 209 vias.
It is built around the ESP32-S2-SOLO-2-N4, TLV9002IDR-MS and ME6217C33M5G, with the XB4908A, XL-1608SYGC-06 and XL-1608UBC-04 among its other parts. Its parts include 36 resistors, 12 capacitors, 7 ICs, 6 transistors and 4 connectors. It belongs with the ESP32 and NXP (LPC, Kinetis, i.MX RT) boards of this library.
This repo theoretically contains everything to build, assemble and run the sparkling forests light installation. In practice it would require much more documentation which i'm too lazy for right now, and maybe the casing-folder also has some pretty rogue STL files that don't belong there.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100k | Resistor_SMD:R_0603_1608Metric | R13, R14, R15, R16, R17, R18, R25, R27, R30, R31, R33 |
| 6 | 100 | Resistor_SMD:R_0603_1608Metric | R2, R4, R6, R8, R10, R12 |
| 6 | IRLML6244 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 4 | 1 | Resistor_SMD:R_0603_1608Metric | R3, R5, R7, R9 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R28, R29, R34 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R21, R22, R23 |
| 2 | 10 | Resistor_SMD:R_0603_1608Metric | R35, R36 |
| 2 | 100nf | Capacitor_SMD:C_0603_1608Metric | C3, C8 |
| 2 | 4 | Resistor_SMD:R_0603_1608Metric | R1, R11 |
| 2 | 470k | Resistor_SMD:R_0603_1608Metric | R19, R24 |
| 2 | Conn_01x06_Socket | footprint:HDR-TH_6P-P2.54-V-F | J1, J2 |
| 2 | TS-1187A-B-A-B | footprint:SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL-2 | T1, T2 |
| 2 | XL-HD6070RGBC-A46L | Library:LED-SMD_XL-HD6070RGBC-A46L | LED1, LED2 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 1000uf | footprint6:CAP-SMD_BD8.0-L8.3-W8.3-FD | C5 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C12 |
| 1 | 100pF optional | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 100uf | footprint:CASE-B_3528 | C10 |
| 1 | 10uf | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 1uf | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 470R | Resistor_SMD:R_0603_1608Metric | R32 |
| 1 | 470nF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R26 |
| 1 | 47uf | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 4k7 | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | B4013AM423-093 | footprint:MIC-TH_BD6.0_B6027AP383-056 | MIC1 |
| 1 | Battery Connector | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J3 |
| 1 | Charging Notches | Library:ChargingNotches | J4 |
| 1 | ESP32-S2-SOLO-2-N4 | footprint:WIRELM-SMD_ESP32-S3-WROOM-1 | U3 |
| 1 | ME6217C33M5G | footprint:SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BR | U8 |
| 1 | MICROXNJ | footprint:MICRO-USB-SMD_MICROXNJ | USB1 |
| 1 | MK-12C02-G025 | footprint:SW-SMD_MK-12C02-G025 | SW1 |
| 1 | TLV9002IDR | footprint:SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL | U4 |
| 1 | TP4056_C725790 | footprint:ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP | U6 |
| 1 | XB4908A | footprint:XB4908A | U5 |
| 1 | XL-1608SYGC-06 | footprint:LED0603-RD_GREEN | U10 |
| 1 | XL-1608UBC-04 | footprint:LED0603-RD_BLUE | U9 |

hdsjulian/sparkles-old
Autonomous blinky devices that triangulate via soundd

Sagaz0501/esp32-drone
PCB ESP32 quadcopter: KiCad hardware + Madgwick IMU firmware + WiFi web UI


H3wastooshort/the_extender
it extends your phones storage, battery life, and audio interfaces


johnowhitaker/timrrr
Hey! Johno the human here. This repo/project is in part a test of the state of 'vibe electronics'. The board works but requires a minor bodge, bridging pins 6&7 on the ATtiny chip.

balazsbencs/ardor
This is a DIY multieffects project with a Raspberry Pi and and Codec Zero and a Raspberry Pi Display 2. With Full NAM A2 support.

akshat-kumar10/MSMP0_PCB
A PCB for an MSMP0 board that features a Modbus Transceiver & Analog Front-End (AFE) for Sensors
It measures 43 × 64.5 mm and has 2 copper layers, 1.6 mm thick.
72 parts, built around the ESP32-S2-SOLO-2-N4, TLV9002IDR-MS, ME6217C33M5G and XB4908A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hdsjulian/sparkles repository on GitHub, at the commit this page was made from: the board is Blinky/Blinky.kicad_pcb and its schematic Blinky/Blinky.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask hdsjulian before reusing the design.