
Arduino uno v1.2
hardikshrimali-ece/CUSTOM-ARDUINO-UNO-R3-SHIELD..-
Arduino Uno R3 Multifunction Shield | KiCad PCB Design | Two-Layer PCB | Open Source Hardware

Arduino Uno Multifunction Shield V3.0 built in KiCad with integrated 4-digit MAX7219 display, UART, I2C, PWM, power headers, buzzer, LEDs, and push buttons. Optimized for embedded systems learning, testing, and rapid hardware prototyping.
ARDUINO UNO SHIELD V3.0 is an open-source printed circuit board by hardikshrimali-ece, from the hardikshrimali-ece/-ARDUINO-UNO-R3-SHIELD-V3.0 repository on GitHub. It is a 2-layer board of 80 × 68.8 mm with 39 parts on 53 nets, routed with 426 tracks and 30 vias.
It is built around the MAX7219M and CC56-12EWA. Its parts include 15 connectors, 7 resistors, 4 diodes, 2 capacitors and 1 IC.
Arduino Uno Multifunction Shield V3.0 built in KiCad with integrated 4-digit MAX7219 display, UART, I2C, PWM, power headers, buzzer, LEDs, and push buttons. Optimized for embedded systems learning, testing, and rapid hardware prototyping.
Overview
The Arduino Uno Multifunction Development Shield V3.0 is an improved version of my previous V2.0 shield, designed to make Arduino prototyping, embedded learning, and peripheral testing faster and more organized.
Unlike many commercial multifunction shields, this version focuses on accessibility, usability, and future expandability while maintaining compatibility with the Arduino Uno.
Objectives
Features
Improvements over V2.0
The display has been repositioned to improve mechanical balance and make the shield visually cleaner.
Benefit
A dedicated UART breakout has been added.
Pins:
Benefit
Added a dedicated I2C interface.
Pins:
Benefit
Quick connection for:
Multiple PWM pins are grouped together.
Benefit
Easy testing of:
Separate power breakout:
Benefit
Reduces jumper wiring during prototyping.
Every interface is clearly labeled.
Examples:
Benefit
Improves usability and reduces wiring mistakes.
Design Philosophy
Rather than simply copying an existing multifunction shield, this project redesigns the layout with emphasis on:
Applications
Current Status
Future Work
Designed by: Hardik Shrimali
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | I2C1, I2C2, PWR1, PWR2, UART1, UART2 |
| 5 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | P1, P2, P3, P4, RSET1 |
| 4 | 1.2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R5, R6, R7 |
| 4 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, pwrd1, rxd1, txd1 |
| 1 | 0.1mF | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 10mF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C2 |
| 1 | ANALOG | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | ANALOG01 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J5 |
| 1 | ANALOG01D | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J9 |
| 1 | Buzzer | Buzzer_Beeper:MagneticBuzzer_ProSignal_ABT-410-RC | BZ1 |
| 1 | CC56-12EWA | Display_7Segment:CA56-12EWA | 4D7SD1 |
| 1 | MAX7219 | Package_DIP:DIP-24_W7.62mm_Socket | U1 |
| 1 | PMOS_Substrate | Package_TO_SOT_SMD:TSOT-23 | Q1 |
| 1 | PWM | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | SPIN1 |
| 1 | VIN 5V | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J1 |
| 1 | analog02 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J6 |
| 1 | analog02 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J10 |
| 1 | digital01 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J3 |
| 1 | digital01d | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J7 |
| 1 | digital02 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | digital02D | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J8 |

hardikshrimali-ece/CUSTOM-ARDUINO-UNO-R3-SHIELD..-
Arduino Uno R3 Multifunction Shield | KiCad PCB Design | Two-Layer PCB | Open Source Hardware

Wladymyr1996/TachMetr-V2.0
The is a LED tachometer for my trike. Work on Atmega8A_AU and MAX7219.



makingdevices/StopWatch
This project is a simple StopWatch for measuring times on different processes or activities.

Robert-Mones/Claculator
A reverse Polish notation calculator with added features such as comparisons, branching, and custom recursive operators taken from the Clac project from the 15-122 course at Carnegie Mellon University.

makingdevices/Bytes-Counter
Bytes Counter is a Open Source Tally Counter HW project

Angelpele/F1-Steering-Wheel
F1 Functional Steering Wheel based on the ESP32
It measures 80 × 68.8 mm and has 2 copper layers, 1.6 mm thick.
39 parts, built around the MAX7219M and CC56-12EWA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hardikshrimali-ece/-ARDUINO-UNO-R3-SHIELD-V3.0 repository on GitHub, at the commit this page was made from: the board is ARDUINO UNO SHIELD V3.0.kicad_pcb and its schematic ARDUINO UNO SHIELD V3.0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask hardikshrimali-ece before reusing the design.