2 layers57.9 × 45.2 mm
CompositeModulator
hanshuebner/sinope
MOVED to code.netzhansa.com/hanshuebner/sinope. This GitHub mirror is archived.
53 parts1
2 layers160 × 100 mm
Sinope
hanshuebner/sinope1MOVED to code.netzhansa.com/hanshuebner/sinope. This GitHub mirror is archived.
- Size
- 160 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 155
- Pads
- 499
- Tracks, vias
- 1,770, 484
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Apr 2020
- Updated
- 16 May 2022
Overview
Sinope is an open-source printed circuit board by hanshuebner, from the hanshuebner/sinope repository on GitHub. It is a 2-layer board of 160 × 100 mm with 52 parts on 155 nets, routed with 1,770 tracks and 484 vias.
It is built around the MAX232N, FT232RL and 74LS157PC, with the MAX695CPE+ and MMBT3904 among its other parts. Its parts include 19 capacitors, 12 ICs, 7 resistors, 5 connectors and 3 diodes.
Main components
5
MAX232N
PDIP-160℃~+70℃ 120Kbps 2 2 4.5V~5.5V Transceiver PDIP-16 RS232 ICs ROHSTexas InstrumentsRS232 ICs
FT232RL
SSOP-28-208mil-40℃~+85℃ 3.3V~5.25V、4V~5.25V USB 2.0 USB to UART SSOP-28-208mil USB Converters ROHSFTDIUSB Converters74LS157PC
PDIP-160℃~+70℃ 4.75V~5.25V Single Supply PDIP-16 Signal Switches, Multiplexers, Decoders ROHSTexas InstrumentsSignal Switches, Multiplexers, DecodersMAX695CPE+
PDIP-160℃~+70℃@(TA) 1 140ms 4.65V Active High、Active Low Backup Battery Switching Push-pull PDIP-16 Supervisor and Reset ICs ROHSMaxim Integrated (Analog Devices)Supervisor And Reset ICs
MMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5, C10, C11, C14, C15, C16, C17, C18, C19, C20, C21, C22 +3 |
| 4 | 3k3 | Resistor_SMD:R_0805_2012Metric | R1, R5, R6, R7 |
| 3 | 330 | Resistor_SMD:R_0805_2012Metric | R2, R3, R4 |
| 3 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3 |
| 2 | SolderJumper_3_Bridged12 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1, JP2 |
| 1 | 27C010 | Package_DIP:DIP-32_W15.24mm | U9 |
| 1 | 3.6864Mhz | Oscillator:Oscillator_DIP-14 | X1 |
| 1 | 74LS157 | Package_DIP:DIP-16_W7.62mm | U11 |
| 1 | Battery | Battery:Battery_Panasonic_CR2032-VS1N_Vertical_CircularHoles | BT1 |
| 1 | FT232RL | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U6 |
| 1 | IO_GAL | Package_DIP:DIP-24_W7.62mm | U7 |
| 1 | MAX232 | Package_DIP:DIP-16_W7.62mm | U5 |
| 1 | MAX695 | Package_DIP:DIP-16_W7.62mm | U8 |
| 1 | MEMORY_GAL | Package_DIP:DIP-24_W7.62mm | U10 |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | PIOA | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J1 |
| 1 | PIOB | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J3 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_PTS645 | SW1 |
| 1 | SERIAL1 | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J2 |
| 1 | TC551001 | Package_DIP:DIP-32_W15.24mm | U12 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J4 |
| 1 | Z80CPU | Package_DIP:DIP-40_W15.24mm | U1 |
| 1 | Z80CTC | Package_DIP:DIP-28_W15.24mm | U2 |
| 1 | Z80PIO | Package_DIP:DIP-40_W15.24mm | U3 |
| 1 | Z80SIO | Package_DIP:DIP-40_W15.24mm | U4 |
| 1 | Z80_BUS | Connector_PinSocket_2.54mm:PinSocket_1x39_P2.54mm_Vertical | J7 |
More from hanshuebner/sinope
1Similar boards
- 2 layers155 × 114 mm
Dpram7134
ja1umi/MUTIF1613Project
Verious design information related to my home-brewed MN1613 16-bit computer
55 parts3MIT - 2 layers232.8 × 204.2 mm
- 2 layers244 × 244 mm
- 2 layers209 × 175 mm
Excalibur64
Cptscorcher/Excallibur-64
A reimagining of the seminal Excalibur 64 Computer
126 partsGPL-3.0 - 2 layers218 × 125 mm
EVA1 production
roberto314/EVA-1_Reproduction
Recreation of the very rare K-K Systems EVA-1 Display Adapter for the Epson HX-20 Computer
116 parts - 2 layers81 × 46 mm
Serial port sniffer
switchcraft/Serial-port-sniffer
A RS232 serial port sniffer with USB interface.
37 parts7 - 2 layers86.4 × 50.8 mm
RS232 Converter
jonghee-son/USB-to-RS232-Converter
USB B to RS232 converter with 5V output on pin 1. For devices with RS232 interface.
19 parts2GPL-3.0 - 2 layers69 × 67 mm
Questions
How big is the Sinope PCB?
It measures 160 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sinope use?
52 parts, built around the MAX232N, FT232RL, 74LS157PC and MAX695CPE+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sinope KiCad files?
From the hanshuebner/sinope repository on GitHub, at the commit this page was made from: the board is hardware/sinope.kicad_pcb and its schematic hardware/sinope.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sinope design in my own project?
Its repository states no licence, so its author keeps all rights: ask hanshuebner before reusing the design.