2 layers51.5 × 76.5 mm
Esp rfm
Phunkafizer/RFM-gateway
Hard- and software for the RFM-gateway, a universal platform for integrating sub-GHz radio into your WiFi network
47 parts1MIT
2 layers44 × 44 mm
EspSensorModule
gvoigtlaender/EspSensorModule2- Size
- 44 × 44 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 33
- Pads
- 102
- Tracks, vias
- 195, 16
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 20 Aug 2018
- Updated
- 8 Jul 2022
Overview
EspSensorModule is an open-source printed circuit board by gvoigtlaender, from the gvoigtlaender/EspSensorModule repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 44 × 44 mm with 37 parts on 33 nets, routed with 195 tracks and 16 vias.
It is built around the ESP-12F and BC847. Its parts include 11 connectors, 10 resistors, 3 ICs, 2 capacitors and 2 diodes. It belongs with the ESP8266 and AVR (ATmega, ATtiny) boards of this library.
Main components
2README
README.mdEspSensorModule
Attiny, Reed-Relay, ESP8266, DTH
Project goals:
- timed meassurement of Temperature & Humidity
- battery driven (18650) with internal voltage meassurement
- small footprint
- optional display of status
- publish values via mqtt
Items on store:
- ESP8266 microcontroller with wifi
- DTH11 / DTH22 temperature sensor
- ATtiny ultra low power microcontroller for timer-control
- 1A05 REED Relays
- SSD1306 128x32px OLED display
- BC846 npn transistor
Schema:
PCB:
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | EspSensorModule:TestPin | J6, J7, J8, J9, J10, J11 | |
| 5 | 10k | Resistors_SMD:R_0805_HandSoldering | R6, R7, R8, R9, R10 |
| 4 | MountingHole_3mm | Mounting_Holes:MountingHole_3mm | REF01, REF2, REF3, REF4 |
| 1 | 100nF | Capacitors_THT:CP_Radial_D4.0mm_P2.00mm | C2 |
| 1 | 13k | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | 1703A | TO_SOT_Packages_SMD:SOT-223 | U2 |
| 1 | 1M | Resistors_SMD:R_0805_HandSoldering | R2 |
| 1 | 1k | Resistors_SMD:R_0805_HandSoldering | R3 |
| 1 | 22k | Resistors_SMD:R_0805_HandSoldering | R5 |
| 1 | 4.7k | Resistors_SMD:R_0805_HandSoldering | R4 |
| 1 | 47uF | Capacitors_THT:CP_Radial_D4.0mm_P2.00mm | C1 |
| 1 | ATTINY | LEDs:LED_0805_HandSoldering | D1 |
| 1 | ATTINY 13A / 85 | EspSensorModule:SOP-SOIC-8_3.9x4.9mm_Pitch1.27mm | U1 |
| 1 | BAT | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J1 |
| 1 | BC847 | TO_SOT_Packages_SMD:SOT-23 | Q1 |
| 1 | D | Diodes_SMD:D_SMA_Handsoldering | 1N1 |
| 1 | DISPLAY | Socket_Strips:Socket_Strip_Straight_1x04_Pitch2.54mm | J3 |
| 1 | DTH | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J4 |
| 1 | ESP | LEDs:LED_0805_HandSoldering | D2 |
| 1 | ESP-12F | ESP8266:ESP-12E_SMD | U3 |
| 1 | Flash | Buttons_Switches_SMD:SW_SPST_TL3342 | SW2 |
| 1 | IFC | EspSensorModule:Pin_Header_Angled_1x04_Pitch2.54mm_1 | J5 |
| 1 | REED 1A05 | EspSensorModule:Relay_Reed | J2 |
| 1 | Reset | Buttons_Switches_SMD:SW_SPST_TL3342 | SW1 |
The 36 most common of 37 parts.
Similar boards
- 2 layers100 × 100 mm
- 2 layers83 × 31.5 mm
Twitch LED Bot
renatocampoy/Twitch-LED-Bot
Este projeto permite que você controle um strip de LED NeoPixel via comandos no chat da Twitch, utilizando a placa ESP8266.
32 partsGPL-3.0 - 2 layers33 × 25 mm
IM350 AM550 5V V3.0
greenMikeEU/shrdzm
SHRDZM (just a name, not an acronym) is an ESP8285/ESP8266 based sensor and actor integration platform.
14 partsGPL-3.0 - 2 layers45.8 × 60 mm
RD Deauther
rdhrobotics/RF-Hunter
A compact, standalone wireless security research device. Three tools in one — RF jammer, Wi-Fi deauther, and captive portal
55 parts - 2 layers55 × 82.7 mm
- 2 layers51.4 × 61 mm
- 2 layers50 × 38 mm
Questions
How big is the EspSensorModule PCB?
It measures 44 × 44 mm and has 2 copper layers, 1.6 mm thick.
What parts does the EspSensorModule use?
37 parts, built around the ESP-12F and BC847. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EspSensorModule KiCad files?
From the gvoigtlaender/EspSensorModule repository on GitHub, at the commit this page was made from: the board is PCB/EspSensorModule.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the EspSensorModule design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).