

Pcb smd
ESP8266 and Plantower AQ sensor
- Size
- 50 × 38 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 19
- Pads
- 148
- Tracks, vias
- 401, 34
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 3 Sep 2019
- Updated
- 6 Nov 2025
Overview
Pcb smd is an open-source printed circuit board by tenderlove, from the tenderlove/esp8266aq repository on GitHub. It is a 2-layer board of 50 × 38 mm with 24 parts on 19 nets, routed with 401 tracks and 34 vias.
It is built around the ESP-12F and PM2.5. Its parts include 6 resistors, 5 connectors, 4 ICs and 3 capacitors. It belongs with the sensors and measurement and home automation and IoT boards and the ESP8266 boards of this library.
Main components
2README
pcb/README.mdMy ESP8266 + Plantower AQ Sensor Project PCB
This is the PCB for the project. I've checked in the gerber files in
gerbers.zip, so you can just upload that to a PCB manufacturer and get PCBs
made. I like JLCPCB.
Parts List
Here are the parts I used:
- ESP-12F for WiFi China
- BME280 for temp / humidity over I2C
- PMS5003 for Air Quality
- MCP1700 3.3v regulator
- 100nf capacitor (4.7mm ceramic disc)
- 47nf capacitor (4.7mm ceramic disc)
- 10uf capacitor (4mm radial)
- 2x 10k resistors (THT, 0207)
- 2x 5.1k resistors (THT, 0207)
- WM7626CT-ND Molex SMD connector for the AQ sensor Europe
- USB4085-GF-A for 5v power supply and serial communication
- 4 pin header to plug in the BME280 breakout board Europe
- MCP2221a for programming the ESP and serial communication
- 2x JST SH 4 pin Vertical Connector. These are optional, they're just for future extension to the board
- IC Socket for mounting the MCP2221a
Assembly
Some of these parts are surface mount parts and they can be somewhat tricky to solder. I recommend using a flux pen and fine solder wire.
I recommend soldering in the following order:
- Resistors
- ESP
- Ceramic capacitors
- MCP1700 Voltage regulator
- IC Socket for MCP2221a
- 10uf radial capacitor
- Molex socket
- JST headers (if using)
- Header socket for BME breakout board
- USB connector
I soldered in that order because I found it easiest to keep the connectors close to the PCB.
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.5mm_Pad_Via | H1, H2, H3, H4 |
| 2 | 1.5k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R5, R6 |
| 2 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1, R2 |
| 2 | 5.1k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R3, R4 |
| 1 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C2 |
| 1 | 47nf | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C3 |
| 1 | ESP-12F | RF_Module:ESP-12E | U3 |
| 1 | I2C 3.3v | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J3 |
| 1 | I2C 5v | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J4 |
| 1 | LOGO | artwork:rubysan | G*** |
| 1 | LOGO | artwork:gorby | G*** |
| 1 | MCP1700-3302E_SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U1 |
| 1 | MCP2221AxST | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U2 |
| 1 | PM2.5 | Connector_Molex:Molex_PicoBlade_53261-0871_1x08-1MP_P1.25mm_Horizontal | U4 |
| 1 | T6703 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J5 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4085 | J1 |
| 1 | header | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J2 |
More from tenderlove/esp8266aq
1- 2 layers50 × 38 mm

Similar boards
- 2 layers55 × 82.7 mm

- 2 layers51.4 × 61 mm

- 2 layers33.7 × 66 mm

Smartbell
Staacks/there.oughta.be
Projects featured on my blog at https://there.oughta.be
27 parts108GPL-3.0 - 2 layers49.4 × 35.8 mm

WS2812Controller
klein0r/pcb-ws2812-wifi-controller
WiFi Controller for WS2812 LED Stripes
22 parts82MIT - 4 layers20 × 48.5 mm

Midea WiFi Dongle
reneklootwijk/mideahvac-dongle
This repository contains the hardware design of a WiFi dongle for Midea-like airconditioners and humidifiers. Midea provides a WiFi dongle (SK102/SK103), either as optional feature or built-in, to control the appliances…
21 parts75 - 2 layers31.4 × 20.6 mm

Window sensor V5
gadjet/Window-Door-sensor-Version-5
Version 5 of the Window/Door sensor project this time with ultra low current consumption
32 parts70GPL-2.0 - 2 layers70 × 36 mm

Air Purifier Uppatvind
horvathgergo/esp8266-for-uppatvind
Smart controller for IKEA Uppåtvind Air Purifiers
27 parts60GPL-3.0 - 2 layers62 × 46 mm

HANmodule
Asbjoern/Kamstrup-Radius-Interface
ESP8266 interface for Kamstrup (Radius provided) electricity meter
46 parts42
Questions
How big is the Pcb smd PCB?
It measures 50 × 38 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pcb smd use?
24 parts, built around the ESP-12F and PM2.5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pcb smd KiCad files?
From the tenderlove/esp8266aq repository on GitHub, at the commit this page was made from: the board is pcb/pcb-smd.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pcb smd design in my own project?
Its repository states no licence, so its author keeps all rights: ask tenderlove before reusing the design.