
Single v1
gujian0302/single-switch--pcb
Single MX Hotswap PCB for hand wiring dactyl-manuform keyboards and their derivatives.

Single MX Hotswap PCB for hand wiring dactyl-manuform keyboards and their derivatives.
Panel is an open-source printed circuit board by gujian0302, from the gujian0302/single-switch--pcb repository on GitHub, published under the MIT licence. It is a 2-layer board of 93 × 98 mm with 670 parts on 75 nets, routed with 550 tracks and 0 vias.
It is built around the 1N4148W. It belongs with the keyboards and input boards of this library.
Single MX Hotswap PCB for hand wiring dactyl-manuform keyboards and their derivatives.
Panelization and fabrication is made possible by KiKit – Automation for KiCAD.


kikit panelize --layout "grid; rows: 5; cols: 5; space: 2mm" --tabs "annotation" --cuts "mousebites; drill: 0.5mm" --post "millradius: 1mm" pcb/single.kicad_pcb pcb/panel.kicad_pcbkikit fab jlcpcb pcb/panel.kicad_pcb pcb/out
This model is based off su120-keyboard and it's stripped down panel.
| Footprint | Author | Modification |
|---|---|---|
| 1pin_conn | su120-keyboard | Removed silkscreen. |
| diod_TH_SMD | su120-keyboard | Top orientation only. Changed diode symbol. |
| MX-Hotswap-1U | MX_V2 | 17x18mm (W x L). Added charm on left pad. |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 320 | NPTH | NPTH | KiKit_MB_100_1, KiKit_MB_100_2, KiKit_MB_101_1, KiKit_MB_101_2, KiKit_MB_102_1, KiKit_MB_102_2, KiKit_MB_103_1, KiKit_MB_103_2, KiKit_MB_104_1, KiKit_MB_104_2, KiKit_MB_105_1, KiKit_MB_105_2, KiKit_MB_106_1, KiKit_MB_106_2, KiKit_MB_107_1, KiKit_MB_107_2 +304 |
| 100 | , , , , , , , , , , , , , , , +84 | ||
| 100 | Col | footprint:1pin_conn-mod | Bottom1, Bottom1, Bottom1, Bottom1, Bottom1, Bottom1, Bottom1, Bottom1, Bottom1, Bottom1, Bottom1, Bottom1, Bottom1, Bottom1, Bottom1, Bottom1 +84 |
| 100 | Row | footprint:1pin_conn-mod | Left1, Left1, Left1, Left1, Left1, Left1, Left1, Left1, Left1, Left1, Left1, Left1, Left1, Left1, Left1, Left1 +84 |
| 25 | 1N4148W | footprint:diode_TH_SMD-top | D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1 +9 |
| 25 | SW_Push | footprint:SW_Cherry_MX_PCB_1.00u | MX1, MX1, MX1, MX1, MX1, MX1, MX1, MX1, MX1, MX1, MX1, MX1, MX1, MX1, MX1, MX1 +9 |

gujian0302/single-switch--pcb
Single MX Hotswap PCB for hand wiring dactyl-manuform keyboards and their derivatives.

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly



MickiusMousius/Rolio46Keyboard
A split wireless keyboard based on the Corne and Sofle


sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…

It measures 93 × 98 mm and has 2 copper layers, 1.6 mm thick.
670 parts, built around the 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gujian0302/single-switch--pcb repository on GitHub, at the commit this page was made from: the board is pcb/panel.kicad_pcb and its schematic pcb/single.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).