

Boiler
Various PCB designs in KiCad
- Size
- 40 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 46
- Pads
- 91
- Tracks, vias
- 91, 4
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 28 Jan 2013
- Updated
- 9 Jun 2014
Overview
Boiler is an open-source printed circuit board by guanix, from the guanix/boards repository on GitHub. It is a 2-layer board of 40 × 40 mm with 23 parts on 46 nets, routed with 91 tracks and 4 vias.
It is built around the ATXMEGA8E5-AN, AQV252G and MIC5205YM5, with the RASM722X among its other parts. Its parts include 7 connectors, 6 capacitors, 4 ICs, 3 resistors and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4ATXMEGA8E5-AN
TQFP-32(7x7)-40℃~+105℃ 1.6V~3.6V 12bit 12bit 1KB 26 32MHz 512Byte 8/16 Bit 8KB AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)AQV252G
DIP-61.14V 1.5kV 250us 60V 80mΩ One set normally open: 2A (SPST - normally open) DIP-6 Solid State Relays (MOS Output) ROHSPanasonicSolid State Relays (MOS Output)MIC5205YM5
SOT-23-5-40℃~+125℃ 1 1.242V~15.65V 150mA 150uA 16V 350mV@(150mA) Adjustable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsRASM722X
SMD1.93mm 5A 6.3mm DC Power Jack Surface Mount, Right Angle SMD DC Power Connectors ROHSSwitchcraftDC Power Connectors
README
cam85/README.mdATtiny85 based shutter timer for keychain spy cameras
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | CONN_1 | M3HOLE | P4, P5, P6, P7 |
| 3 | 0.1uF | SM0603 | C1, C2, C3 |
| 2 | 1K | SM0603 | R1, R2 |
| 2 | 4.7uF | SM0805 | C5, C6 |
| 2 | LED | LED-0805 | D1, D2 |
| 1 | 24L-MOD-8 | pin_array_4x2 | IC1 |
| 1 | 33R | SM0603 | R3 |
| 1 | 470pF | SM0603 | C4 |
| 1 | AQV252 | DIP-6__300 | U1 |
| 1 | ATXMEGA8E5-A | TQFP32 | IC2 |
| 1 | CONN_2 | SCREW-3.5MM-2 | P2 |
| 1 | CONN_3X2 | pin_array_3x2 | P1 |
| 1 | INDUCTOR | SM0603 | L1 |
| 1 | MIC5205 | SOT23-5 | U2 |
| 1 | RASM722X | RASM722X | P3 |
More from guanix/boards
12- 2 layers

- 2 layers100 × 50 mm

- 2 layers71.8 × 49.5 mm

- 2 layers32.4 × 25.4 mm

- 2 layers40 × 30 mm

- 2 layers26 × 35.6 mm

- 2 layers50 × 50 mm

- 2 layers50 × 50 mm

- 2 layers

- 2 layers61 × 20.3 mm

- 2 layers33 × 36.8 mm

- 2 layers

Similar boards
- 4 layers45 × 45 mm

- 2 layers160 × 100 mm

- 2 layers99.9 × 70 mm

- 2 layers18 × 33.2 mm

Arduino pro mini
etimou/arduino-pro-mini-kicad
This is a clone of the well known arduino board "pro-mini" designed in kicad while the original was designed in eagle. Ref https://store.arduino.cc/arduino-pro-mini
23 parts69 - 2 layers34.1 × 34.2 mm

TinyFINITY
fishpepper/tinyFINITY
Tiny and opensource video transmitter with integrated graphic OSD
155 parts42 - 2 layers139 × 139 mm

Breeze electronics design
microdynamics-robot-quadcopter/breeze_electronics_design
This project is created and managed by EDA softwares, which contains the breeze quadcopter's component library, footprint library, schematic, printed circuit boards, etc.
107 parts13GPL-3.0 - 2 layers66.8 × 104.8 mm

- 4 layers27.9 × 20.3 mm

RF Attenuator Board
ckflight/RF_ATTENUATOR_HARDWARE
1 to 6000MHz 7-Bit Digital Step Attenuator Board with Parallel or Serial Interface
35 parts5MIT
Questions
How big is the Boiler PCB?
It measures 40 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Boiler use?
23 parts, built around the ATXMEGA8E5-AN, AQV252G, MIC5205YM5 and RASM722X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Boiler KiCad files?
From the guanix/boards repository on GitHub, at the commit this page was made from: the board is boiler/boiler.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Boiler design in my own project?
Its repository states no licence, so its author keeps all rights: ask guanix before reusing the design.