Skip to the content
2 layers160 × 100 mmSolar adapter, the printed circuit board in 3D

Collection of different Kicad files

Size
160 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
29
Nets
31
Pads
101
Tracks, vias
78, 26
Pours
28
Routed
Yes
KiCad
KiCad 4
Created
23 Aug 2017
Updated
20 Dec 2017

Overview

Solar adapter is an open-source printed circuit board by JamesMellow, from the JamesMellow/kicad_JM repository on GitHub. It is a 2-layer board of 160 × 100 mm with 29 parts on 31 nets, routed with 78 tracks and 26 vias.

It is built around the AQV252G. Its parts include 10 capacitors, 7 resistors, 5 connectors, 3 ICs and 2 diodes. It belongs with the power and interfaces and adapters boards of this library.

Main components

1

README

README.md

kicad_JM

Collection od different Kicad files including some: -selfmade footprints -projects -gerber files

Parts

29
QtyValueFootprintReferences
20,1uCapacitors_SMD:C_0805_HandSolderingC2, C7
210uCapacitors_SMD:C_0805_HandSolderingC4, C10
21nCapacitors_SMD:C_0805_HandSolderingC1, C6
21uCapacitors_SMD:C_1206_HandSolderingC3, C8
22,2uCapacitors_SMD:C_0805_HandSolderingC5, C9
220kResistors_SMD:R_0805_HandSolderingR3, R6
285kResistors_SMD:R_0805_HandSolderingR4, R7
2D_SchottkyDiodes_SMD:MELF_StandardD1, D2
2JACK_TRS_6PINSConnectors:RJ12_EJ1, J2
2LT3580Housings_SSOP:MSOP-8-1EP_3x3mm_Pitch0.65mmU2, U3
2TRANSFOWE-Drosseln:744878002_WET1, T2
1165kResistors_SMD:R_0805_HandSolderingR5
1180kResistors_SMD:R_0805_HandSolderingR2
1AQV252GHousings_DIP:DIP-6_W7.62mmU1
1CONN_01X02Sockets_WAGO734:WAGO_734_2pin_StraightP2
1CONN_01X03Sockets_WAGO734:WAGO_734_3pin_StraightP3
1CONN_01X04Sockets_WAGO734:WAGO_734_4pin_StraightP1
1RResistors_SMD:R_0805_HandSolderingR1

More from JamesMellow/kicad_JM

3
  • 2 layers50 × 16 mmSoWi Immer, the printed circuit board in 3D

    SoWi Immer

    JamesMellow/kicad_JM

    Collection of different Kicad files

    17 parts
  • 2 layers40 × 60 mmStatorwicklung, the printed circuit board in 3D

    Statorwicklung

    JamesMellow/kicad_JM

    Collection of different Kicad files

    5 parts
  • 2 layersACS1-USE1, the printed circuit board in 3D

    ACS1-USE1

    JamesMellow/kicad_JM

    Collection of different Kicad files

    2 parts

Similar boards

  • 2 layers40 × 40 mmBoiler, the printed circuit board in 3D

    Boiler

    guanix/boards

    Various PCB designs in KiCad

    23 parts73
  • 2 layers99.9 × 70 mmFuel gauge, the printed circuit board in 3D

    Fuel gauge

    UviDTE-UviSpace/pcb-designs

    Printed Circuit Boards (PCBs) for UviSpace

    41 partsGPL-3.0
  • 2 layers52.3 × 10.5 mmStackLink, the printed circuit board in 3D

    StackLink

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    29 parts5.1kGPL-3.0
  • 2 layers56 × 20 mmHallEffectXY Endstop, the printed circuit board in 3D

    HallEffectXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    29 parts1.1kGPL-3.0
  • 2 layers50 × 23.2 mmAnalog, the printed circuit board in 3D

    Analog

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    29 parts1kGPL-3.0
  • 2 layers16.8 × 13.6 mmE Fidget Lite, the printed circuit board in 3D

    E Fidget Lite

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    29 parts915
  • 2 layers85 × 12.5 mmTERES PCB3-TOUCH BTN Rev.A, the printed circuit board in 3D

    TERES PCB3-TOUCH BTN Rev.A

    OLIMEX/DIY-LAPTOP

    Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

    29 parts578Apache-2.0
  • 2 layers33.7 × 97.8 mmHAN ESP TSS721, the printed circuit board in 3D

    HAN ESP TSS721

    UtilitechAS/amsreader-firmware

    ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

    29 parts470

Questions

How big is the Solar adapter PCB?

It measures 160 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Solar adapter use?

29 parts, built around the AQV252G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Solar adapter KiCad files?

From the JamesMellow/kicad_JM repository on GitHub, at the commit this page was made from: the board is Projekte/Solar_adapter/Solar_adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Solar adapter design in my own project?

Its repository states no licence, so its author keeps all rights: ask JamesMellow before reusing the design.