
PCB puerta
yabo104/Electric_Door_With_ESP32_S3
This proyeject contains a hardware/firmware development for an electric door controller.

AVR Spotter is an open-source printed circuit board by gty77663, from the gty77663/AVR-Spotter repository on GitHub. It is a 2-layer board of 80 × 63.3 mm with 68 parts on 58 nets, routed with 343 tracks and 105 vias.
It is built around the ATMEGA328P-AU, TN5015H-6T and HLK-PM01, with the 74HC14, EL817(S1)(TU) and MOC3021M among its other parts. Its parts include 18 resistors, 7 capacitors, 4 ICs, 3 diodes and 3 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10k | Resistor_SMD:R_0603_1608Metric | R4, R5, R6, R7, R9, R11, R12, R13 |
| 5 | 47nF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C4, C5, C6 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R17 |
| 2 | 120k | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R15, R16 |
| 2 | 1N4007 | Diode_SMD:D_SMA | D1, D2 |
| 2 | 330Ω | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8, R14 |
| 2 | TN5015H-6T | digikey-footprints:TO-220-3 | Q1, Q2 |
| 1 | 0.1u | Capacitor_SMD:C_1206_3216Metric | C7 |
| 1 | 16mhz | Crystal:Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | 360Ω | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 39Ω | Resistor_SMD:R_1210_3225Metric | R18 |
| 1 | 470u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C2 |
| 1 | 470Ω | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R10 |
| 1 | 74HC14 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U3 |
| 1 | ATmega328P-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | UART1 |
| 1 | Conn_01x05 | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | EXT-ENCODER1 |
| 1 | EL817S1 | digikey-footprints:SMD-4_4.6x6.5mm_P2.54mm | U4 |
| 1 | ENC_A | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | ENC_A_LCD | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | ENC_B | TestPoint:TestPoint_Pad_D1.0mm | TP7 |
| 1 | ENC_B_LCD | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | ENC_SW | TestPoint:TestPoint_Pad_D1.0mm | TP8 |
| 1 | ENC_SW_LCD | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | EXP1 | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | EXP1 |
| 1 | EXP2 | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | EXP2 |
| 1 | HLK-PM01 | Converter_ACDC:Converter_ACDC_HiLink_HLK-PMxx | PS1 |
| 1 | Heatsink_76x45x21mm_2Holes | Heatsink:Heatsink_76x45x21mm_2Holes | HS |
| 1 | ISP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | ISP1 |
| 1 | LCD | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | SMALL-LCD1 |
| 1 | LCD_CS | TestPoint:TestPoint_Pad_D1.0mm | TP15 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | PWR1 |
| 1 | MB6S | Package_TO_SOT_SMD:TO-269AA | D3 |
| 1 | MOC3021M | Package_DIP:SMDIP-6_W9.53mm | U2 |
| 1 | MOSI_LCD | TestPoint:TestPoint_Pad_D1.0mm | TP10 |
| 1 | Main switch | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | PWM | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | Power | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | SCK_LCD | TestPoint:TestPoint_Pad_D1.0mm | TP11 |
| 1 | SCL | TestPoint:TestPoint_Pad_D1.0mm | TP13 |
| 1 | SDA | TestPoint:TestPoint_Pad_D1.0mm | TP12 |
| 1 | SD_CS | TestPoint:TestPoint_Pad_D1.0mm | TP14 |
| 1 | SW | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | Screw_Terminal_01x03 | Connector_Phoenix_GMSTB:PhoenixContact_GMSTBA_2,5_3-G-7,62_1x03_P7.62mm_Horizontal | J3 |
| 1 | ZD | TestPoint:TestPoint_Pad_D1.0mm | TP9 |
The 62 most common of 68 parts.

yabo104/Electric_Door_With_ESP32_S3
This proyeject contains a hardware/firmware development for an electric door controller.


WingTechCorner/WTC_PROJECT-OpticallyIsolatedQuadMosfetBoard
PCB Board designed to control 4 optically isolated MOSFETS via an ESP32 module


xicor22/Aaram
PCB design for retro fitting old switch boards with new tech to control it remotely.

R-Mutura/DISHWASHER
Contains hardware and Software implementation of a dishwasher product

NguyenThanhHuy-debug/PCB_Real-Time-Power-Monitoring-System-Development-Light-Switch
PCBReal-Time-Power-Monitoring-System-Development-Light-Switch — a software project built with modern tooling.

Arnaud-Apu-Fanovard/Hotplate-soldering
Hotplate soldering for PCB SMD componants for diyPCB
It measures 80 × 63.3 mm and has 2 copper layers, 1.6 mm thick.
68 parts, built around the ATMEGA328P-AU, TN5015H-6T, HLK-PM01 and 74HC14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gty77663/AVR-Spotter repository on GitHub, at the commit this page was made from: the board is kicad/AVR-Spotter.kicad_pcb and its schematic kicad/AVR-Spotter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask gty77663 before reusing the design.