

Telesoarer
Lost Model Alarm & Variometer for RC Slope Soarer / Sailplanes
- Size
- 50.3 × 19.1 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 63
- Pads
- 191
- Tracks, vias
- 517, 76
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 31 Oct 2016
- Updated
- 22 Dec 2016
Overview
Telesoarer is an open-source printed circuit board by gruvin, from the gruvin/telesoarer repository on GitHub. It is a 4-layer board of 50.3 × 19.1 mm with 52 parts on 63 nets, routed with 517 tracks and 76 vias.
It is built around the STM32F103CBT6, AD8027ARTZ-R2 and BC847C. Its parts include 18 capacitors, 13 resistors, 7 connectors, 5 diodes and 4 ICs. It belongs with the STM32 boards of this library.
Main components
3STM32F103CBT6
LQFP-48(7x7)-40℃~+85℃ 128KB 12bit 20KB 2V~3.6V 32 Bit 37 72MHz ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)AD8027ARTZ-R2
SOT-23-6-40℃~+125℃ 1 1.5uV/℃ 100V/us 110dB 190MHz 2.7V~12V 4.3nV/√Hz@100kHz 4uA 6.5mA 900nA 900uV Enable/shutdown function、Overvoltage protection Rail-to-Rail Input, Rail-to-Rail Output SOT-23-6 Operational Amplifier ROHSAnalog DevicesOperational AmplifierBC847C
SOT-23-55℃~+150℃ 1 NPN 100MHz 100mA 100nA 200mW 420 45V 500mV 6V NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
README
hardware/README.mdHardware
Designed in KiCAD v4
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0u1 | footprints:C_0402 | C1, C5, C6, C7, C8, C9, C10, C11, C14 |
| 4 | 1u | footprints:C_0402 | C12, C13, C15, C16 |
| 4 | 5K | footprints:R_0402 | R3, R8, R10, R11 |
| 3 | 1K | footprints:R_0402 | R1, R4, R9 |
| 2 | 100K | footprints:R_0402 | R12, R15 |
| 2 | 18p | footprints:C_0402 | C2, C3 |
| 2 | 2u2 | footprints:C_0402 | C17, C18 |
| 2 | D_Schottky | Diodes_SMD:SOD-523 | D4, D5 |
| 1 | 100 | footprints:R_0402 | R13 |
| 1 | 16MHz | Crystals:Crystal_SMD_2520_4Pads | X1 |
| 1 | 1K5 | footprints:R_0402 | R6 |
| 1 | 22u | footprints:TantalC_SizeS_EIA-3216 | C4 |
| 1 | 390K | footprints:R_0402 | R14 |
| 1 | 3K9 | footprints:R_0402 | R5 |
| 1 | AD8027ARTZ | TO_SOT_Packages_SMD:SOT-23-6 | U3 |
| 1 | AOUT | Pin_Headers:Pin_Header_Angled_1x02 | P4 |
| 1 | AUTOTRANS | footprints:TRI-3 | L1 |
| 1 | BC847C | footprints:SOT23-BCE | Q1 |
| 1 | BLUE | footprints:LED_0603 | D2 |
| 1 | BOOT0 | footprints:BR_O_0603 | J1 |
| 1 | CONN_01X05 | Connectors_JST:JST_SH_SM05B-SRSS-TB_05x1.00mm_Angled | P5 |
| 1 | GREEN | footprints:LED_0603 | D3 |
| 1 | MCP1703T-3302 | footprints:SOT-23A | U2 |
| 1 | MS5611 | footprints:MS5611_8_3mmx5mm_SMD | U1 |
| 1 | OLED 0.91" 128x32 | footprints:ZIF_FPC15 | P3 |
| 1 | PZ | Connectors_JST:JST_SH_SM02B-SRSS-TB_02x1.00mm_Angled | P1 |
| 1 | PZ_IN | Connectors_JST:JST_SH_SM02B-SRSS-TB_02x1.00mm_Angled | P2 |
| 1 | PZ_OUT | footprints:PIN_ARRAY_2X1 | PZ1 |
| 1 | RC_SIG | Pin_Headers:Pin_Header_Angled_1x03 | K1 |
| 1 | RED | footprints:LED_0603 | D1 |
| 1 | RESET | footprints:BR_O_0603 | J2 |
| 1 | STM32F103CBT6 | footprints:LQFP-48_7x7mm_Pitch0.5mm | IC1 |
Similar boards
- 2 layers167 × 115 mm

- 2 layers51 × 71 mm

- 2 layers168.5 × 58.8 mm

- 2 layers58 × 100 mm

FullBoardChargePumpCapMult
z2amiller/pedalfx
Replaces the Panasonic MN3102 (clock generator for MN3204/05/07/08/09 BBDs) with a CD4047B plus four passives. Two ways to use it:
40 parts7 - 2 layers91.4 × 40.6 mm

Mhixy
iblue/mhi-xy-bus
Reverse engineering of the Mitsubishi Heavy Industries X/Y Bus as used in FDUM air condition
70 parts6 - 2 layers66.8 × 104.8 mm

- 2 layers78 × 79 mm

- 2 layers20 × 52 mm

Questions
How big is the Telesoarer PCB?
It measures 50.3 × 19.1 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Telesoarer use?
52 parts, built around the STM32F103CBT6, AD8027ARTZ-R2 and BC847C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Telesoarer KiCad files?
From the gruvin/telesoarer repository on GitHub, at the commit this page was made from: the board is hardware/telesoarer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Telesoarer design in my own project?
Its repository states no licence, so its author keeps all rights: ask gruvin before reusing the design.