

USBHUB 2514B
- Size
- 80 × 40 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 110
- Nets
- 94
- Pads
- 414
- Tracks, vias
- 821, 170
- Pours
- 16
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Oct 2024
- Updated
- 7 Oct 2024
Overview
USBHUB 2514B is an open-source printed circuit board by grkacprzak, from the grkacprzak/USBHUB_2514B repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 80 × 40 mm with 110 parts on 94 nets, routed with 821 tracks and 170 vias.
It is built around the MP62551DGT-LF-Z, 74AHC1G08GW and 74LVC1G80GW, with the MAX809SQ308T1G-TP and MIC5219-3.3YM5 among its other parts. Its parts include 40 resistors, 24 capacitors, 22 ICs, 6 diodes and 6 connectors. It belongs with the interfaces and adapters boards of this library.
Main components
5MP62551DGT-LF-Z
TQFN-6(2x2)-40℃~+85℃ 1 1.5A 2.5V~5.5V 88mΩ Active High Load Switch Overcurrent Protection(OCP)、Over Temperature Protection TQFN-6(2x2) Power Distribution Switches ROHSMonolithic Power SystemsPower Distribution Switches74AHC1G08GW
SOT-353-40℃~+125℃ 1 1.5V~3.85V 1.9V~2V、2.9V~3V、3.7V~3.94V、4.4V~4.5V 100mV、360mV~550mV 10nA 2 2V~5.5V 500mV~1.65V 74AHC Series 9.5ns@3.3V,15pF AND Gate Overvoltage-tolerant input StandardCMOS SOT-353 Logic Gates ROHSMDDLogic Gates74LVC1G80GW
SOT-353-5-40℃~+125℃ 1 1.1ns 1.65V~5.5V 1.8ns@5V,50pF 100nA 200MHz 24mA 24mA 500ps 5pF 74LVC Series D-Type Rising Edge SOT-353-5 Flip Flops ROHSNexperiaFlip FlopsMAX809SQ308T1G-TP
SOT-323-40℃~+85℃ 1V~5.5V 3.08V 3uA Active Low Push-pull SOT-323 Supervisor and Reset ICs ROHSTECH PUBLICUncategorisedMIC5219-3.3YM5
SOT23-53.3V 500mA Peak Output Low Drop-Out (LDO) RegulatorMicrochip TechnologyUncategorised
README
README.mdUSBHUB_2514B
Parts
110| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | R | Resistor_SMD:R_0402_1005Metric | R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R27, R28 +12 |
| 10 | 220nF | Capacitor_SMD:C_0402_1005Metric | C15, C16, C17, C18, C19, C20, C21, C22, C23, C24 |
| 6 | 22uF | Capacitor_SMD:C_0805_2012Metric | C3, C4, C6, C8, C10, C12 |
| 6 | C | Capacitor_SMD:C_0402_1005Metric | C1, C2, C5, C7, C9, C11 |
| 6 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4, D5, D6 |
| 6 | MP62551DGT | Package_DFN_QFN:DFN-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U8, U9, U10, U11, U12, U13 |
| 5 | WE-TVS-82400102 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U1, U3, U4, U5, U6 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric | R29, R31, R35, R39 |
| 4 | 47k | Resistor_SMD:R_0402_1005Metric | R30, R32, R36, R40 |
| 4 | 74AHC1G08 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U23, U24, U25, U26 |
| 4 | 74LVC1G80 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U18, U19, U20, U21 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.5mm_Pad | H1, H2, H3, H4 |
| 4 | SW_SPST | Button_Switch_THT:SW_PUSH_6mm_H9.5mm | SW1, SW2, SW3, SW4 |
| 4 | USB_A | all_gk_fp_Ki8:USB_A_Wuerth_614004185023_Vertical | J3, J4, J5, J6 |
| 3 | 100k | Resistor_SMD:R_0402_1005Metric | R23, R24, R26 |
| 2 | 100n | Capacitor_SMD:C_0402_1005Metric | C13, C14 |
| 2 | FerriteBead | Inductor_SMD:L_0805_2012Metric | FB1, FB2 |
| 2 | USB_C_Receptacle_USB2.0_16P | all_gk_fp_Ki8:USB_C_Receptacle_Wuerth_629722000214 | J1, J2 |
| 1 | 12k/1% | Resistor_SMD:R_0402_1005Metric | R25 |
| 1 | 24MHz | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | MAX809SQ308T1G | Package_TO_SOT_SMD:SOT-323_SC-70 | U28 |
| 1 | MIC5219-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U7 |
| 1 | USB2514B_Bi | Package_DFN_QFN:QFN-36-1EP_6x6mm_P0.5mm_EP3.7x3.7mm | U2 |
The 109 most common of 110 parts.
Similar boards
- 4 layers38.1 × 25.4 mm

- 6 layers64 × 90 mm

Urti mainboard
greatscottgadgets/urti-mainboard
Mainboard of URTI, the Universal Radio Test Instrument
468 parts29CERN-OHL-P-2.0 - 2 layers33.5 × 37.5 mm

- 2 layers76.5 × 50 mm

- 4 layers65 × 56 mm

- 4 layers80 × 45 mm

- 2 layers100 × 50 mm

- 2 layers25.4 × 45.7 mm

Questions
How big is the USBHUB 2514B PCB?
It measures 80 × 40 mm and has 4 copper layers, 1.6 mm thick.
What parts does the USBHUB 2514B use?
110 parts, built around the MP62551DGT-LF-Z, 74AHC1G08GW, 74LVC1G80GW and MAX809SQ308T1G-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the USBHUB 2514B KiCad files?
From the grkacprzak/USBHUB_2514B repository on GitHub, at the commit this page was made from: the board is USBHUB_2514B.kicad_pcb and its schematic USBHUB_2514B.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the USBHUB 2514B design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).