

Inwall relay
- Size
- 33.5 × 37.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 31
- Pads
- 130
- Tracks, vias
- 158, 157
- Pours
- 13
- Routed
- Yes
- KiCad
- KiCad 6 (file 20220815)
- Created
- 14 Jan 2023
- Updated
- 14 Jan 2023
Overview
Inwall relay is an open-source printed circuit board by slaesh, from the slaesh/smahoo-hw repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 33.5 × 37.5 mm with 47 parts on 31 nets, routed with 158 tracks and 157 vias.
It is built around the BTA16-800B, 74LVC1G80GW and BP2525B, with the MOC3063M, TC75S56F,LF and BAS21GWX among its other parts. Its parts include 15 resistors, 9 capacitors, 9 diodes, 5 ICs and 2 connectors. It belongs with the home automation and IoT boards of this library.
Main components
6BTA16-800B
TO-220-40℃~+125℃ 1.5V 1.5V 16A 1W 50mA 50mA 800V TO-220 Thyristors (SCR)/Modules ROHSSlkorThyristors (SCR)/Modules74LVC1G80GW
SOT-353-5-40℃~+125℃ 1 1.1ns 1.65V~5.5V 1.8ns@5V,50pF 100nA 200MHz 24mA 24mA 500ps 5pF 74LVC Series D-Type Rising Edge SOT-353-5 Flip Flops ROHSNexperiaFlip FlopsBP2525B
SOT-33-5ASOT-33-5A New Arrivals ROHSBPSUncategorisedMOC3063M
DIP-6-40℃~+85℃ 1 1.5V 250mW 30mA 6 600V 600V/us 7.5kV TRIAC Yes DIP-6 Triac, SCR Output Optoisolators ROHSonsemiTriac, SCR Output OptoisolatorsTC75S56F,LF
SC-74A(SOT-753)-40℃~+85℃ 1 11uA 1mV 1pA 680ns TTL、CMOS SC-74A(SOT-753) Comparators ROHSToshibaComparatorsBAS21GWX
SOD-1231.25V@200mA 100nA@200V 200V 225mA 50ns Independent SOD-123 Switching Diodes ROHSNexperiaSwitching Diodes
README
README.mdsmahoo-hw
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1N4007 | Diode_SMD:D_SOD-123 | D2, D3, D4, D6, D7, D8 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R11, R29, R30, R31, R32 |
| 3 | 300k | Resistor_SMD:R_0805_2012Metric | R26, R27, R28 |
| 2 | 1.2k | Resistor_SMD:R_0402_1005Metric | R4, R20 |
| 2 | 100n | Capacitor_SMD:C_0402_1005Metric | C12, C14 |
| 2 | 3.3uF | my-stuff:CP_Elec_8x10 | C1, C3 |
| 1 | .3R | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 1.5k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 100R | Resistor_SMD:R_1206_3216Metric | R5 |
| 1 | 1mH | Inductor_SMD:L_1210_3225Metric | L1 |
| 1 | 1uF/16V | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 22uF | Capacitor_SMD:C_0402_1005Metric | C11 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 330R | Resistor_SMD:R_1206_3216Metric | R6 |
| 1 | 470uF | my-stuff:CP_Elec_6.3x7.7 | C8 |
| 1 | 470uH | my-stuff:L_6x6mm | L2 |
| 1 | 680R | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 74LVC1G80 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U6 |
| 1 | APE8865N-15-HF-3 | Package_TO_SOT_SMD:SOT-23 | U3 |
| 1 | BAS21GWX | Diode_SMD:D_SOD-123 | D1 |
| 1 | BP2525 | my-stuff:sot33-5a | U1 |
| 1 | BTA16-800B | my-stuff:D2PAK | Q1 |
| 1 | Conn_01x06_Female | my-stuff:WJ126-5.0 | J2 |
| 1 | IWR_CPU_MODULE | my-stuff:inwall-relay-cpu-female | J1 |
| 1 | LOGO | LOGO | G*** |
| 1 | MOC3063M | my-stuff:SMDIP-6_W9.53mm | U2 |
| 1 | Polyfuse | Fuse:Fuse_1210_3225Metric | F1 |
| 1 | SW_Push | my-stuff:TS-1088C-02526 | SW1 |
| 1 | TC75S56 | my-stuff:SSOP-5-0.65 | U7 |
| 1 | Varistor | Varistor:RV_Disc_D12mm_W3.9mm_P7.5mm | RV1 |
| 1 | blue | LED_SMD:LED_0603_1608Metric | LED1 |
| 1 | optional: 10pF / 500V | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | orange | LED_SMD:LED_0603_1608Metric | LED2 |
More from slaesh/smahoo-hw
1- 4 layers32 × 10.3 mm

Similar boards
- 2 layers69 × 28 mm

Laser Backplane DVI
TU-Darmstadt-APQ/Laser_Backplane_DVI
Laser backplane with DVI connector featuring fast current modulation and a laser diode protection.
47 parts7CERN-OHL-W-2.0 - 2 layers90 × 100 mm

Olivia control
AlterMundi-MonitoreoyControl/Proyecto-Incubadora
Is an innovative project aimed at enhancing the efficiency and productivity of poultry incubators in family farming.
51 parts4LGPL-2.1 - 2 layers226.2 × 263.7 mm

PCB HORNO
Bojtronic/TFG
Trabajo final de graduación para el grado de licenciatura en ingeniería en computadores
254 parts - 4 layers325 × 270 mm

2023-24 Power Supply 2
cdagher/BenderPower
Power Supply Hardware and Firmware for the Bender Autonomous Robotics Project
320 partsMIT - 6 layers64 × 90 mm

Urti mainboard
greatscottgadgets/urti-mainboard
Mainboard of URTI, the Universal Radio Test Instrument
468 parts29CERN-OHL-P-2.0 - 2 layers76.5 × 50 mm

- 4 layers65 × 56 mm

- 4 layers80 × 45 mm

Questions
How big is the Inwall relay PCB?
It measures 33.5 × 37.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Inwall relay use?
47 parts, built around the BTA16-800B, 74LVC1G80GW, BP2525B and MOC3063M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Inwall relay KiCad files?
From the slaesh/smahoo-hw repository on GitHub, at the commit this page was made from: the board is base-board/inwall-relay.kicad_pcb and its schematic base-board/inwall-relay.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Inwall relay design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).