

Pico lcd2.8-pack
- Size
- 76.5 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 93
- Pads
- 283
- Tracks, vias
- 582, 222
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Jul 2025
- Updated
- 11 Jun 2026
Overview
Pico lcd2.8-pack is an open-source printed circuit board by Daft-Freak, from the Daft-Freak/DaftBlit repository on GitHub. It is a 2-layer board of 76.5 × 50 mm with 45 parts on 93 nets, routed with 582 tracks and 222 vias.
It is built around the 74LVC1G17Z, 74LVC1G80GW and MMBT2222A. Its parts include 18 resistors, 10 connectors, 9 capacitors, 4 ICs and 1 transistor. It belongs with the RP2040 and RP2350 boards of this library.
Main components
374LVC1G17Z
SOT-553-40℃~+125℃ 1 1 1.65V~5.5V 10uA 32mA 32mA 4.4ns@5V,15pF 74LVC Push-pull Schmitt trigger Unidirectional SOT-553 Buffers, Drivers, Receivers, Transceivers ROHSDiodes IncorporatedBuffers, Drivers, Receivers, Transceivers74LVC1G80GW
SOT-353-5-40℃~+125℃ 1 1.1ns 1.65V~5.5V 1.8ns@5V,50pF 100nA 200MHz 24mA 24mA 500ps 5pF 74LVC Series D-Type Rising Edge SOT-353-5 Flip Flops ROHSNexperiaFlip FlopsMMBT2222A
SOT-23-55℃~+150℃ 1 NPN 100 100nA 1V 300MHz 300mW 40V 600mA 6V NPN Standalone SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
README
README.mdDaftBlit
It's... a handheld console?

Boards
- Gamepads (x2)
board/extra-buttons: "Start/Select" buttonsboard/display: "Display" / main baard (has some sound/backlight issues)
3D Printed Parts
abxy.stlA/B/X/Y buttons (x4)console28-back.stlback half of caseconsole28-front.stlfront half of case, should be printed face downconsole28-dbg-covercover for debug port accesscontroller-mod-back.stl/controller-mod-front.stlmodifiers for multi-colour printingdpad.stldpad, requires supports and a bit tricky to printon-off-flat.stlpower buttonstart-select.stlstart/select buttons, requires supports and is very small (x2)
Other hardware
- Button pads: 2x the dpad part from a GBA SP set.
- LCD: HD28081C40 (2.8 inch 40 pin 240x320 ST7789, this pinout)
- Speaker: TODO (can't remember if it's https://shop.pimoroni.com/products/mini-speaker-8-1w or not)
- Battery: TODO
- Screws: TODO (there are four different ones)
- Cables: 1-2 "short" (50mm?) i2c cables and a longer one (100mm?), 5-pin 0.5mm ffc for start/select buttons
- Joystick: the switch joy-con one
- Brains: RP2350 stamp, the XL one if you want the power button to work
- Optional sensor stick for... sensors
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10k | Resistor_SMD:R_0402_1005Metric | R5, R6, R7, R8, R9, R10, R11, R15, R16 |
| 3 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C5 |
| 3 | 10uF | Capacitor_SMD:C_0402_1005Metric | C6, C7, C8 |
| 3 | 1uF | Capacitor_SMD:C_0402_1005Metric | C3, C4, C9 |
| 3 | 2 | Resistor_SMD:R_0402_1005Metric | R1, R2, R3 |
| 3 | Conn_01x04_MountingPin | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J3, J4, J5 |
| 2 | 100k | Resistor_SMD:R_0402_1005Metric | R17, R18 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R12, R13 |
| 2 | Conn_01x03_MountingPin | Connector_JST:JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_Horizontal | J6, J7 |
| 1 | 1X02PICOBLADE | Connector_Molex:Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | J8 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 620k | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 74LVC1G17 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U2 |
| 1 | 74LVC1G80 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U3 |
| 1 | Conn_01x40_MountingPin | Daft_Misc:XUNPU_FPC-05FB-40PH20_1x40-1MP_P0.50mm_Horizontal | J1 |
| 1 | Gain Jumper | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP1 |
| 1 | JST_PH_S2B-PH-SM4 | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J10 |
| 1 | MAX98357A | Package_DFN_QFN:TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U1 |
| 1 | MMBT2222A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Micro_SD_Card_Det1 | Daft_Misc:microSD_HC_Push | J2 |
| 1 | RP2350_Stamp_XL | RP2xxx_Stamp:RP2xxx_Stamp_Combo_SMD | U5 |
| 1 | SW_Push | Daft_Misc:SW_Push_TSA002 | SW1 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1 |
| 1 | USB_C | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J9 |
More from Daft-Freak/DaftBlit
1- 2 layers27.9 × 13.5 mm

Similar boards
- 6 layers64 × 90 mm

Urti mainboard
greatscottgadgets/urti-mainboard
Mainboard of URTI, the Universal Radio Test Instrument
468 parts29CERN-OHL-P-2.0 - 2 layers33.5 × 37.5 mm

- 4 layers65 × 56 mm

- 4 layers80 × 45 mm

- 2 layers100 × 50 mm

- 2 layers25.4 × 45.7 mm

- 4 layers185 × 58.6 mm

- 4 layers80 × 40 mm

Questions
How big is the Pico lcd2.8-pack PCB?
It measures 76.5 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pico lcd2.8-pack use?
45 parts, built around the 74LVC1G17Z, 74LVC1G80GW and MMBT2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pico lcd2.8-pack KiCad files?
From the Daft-Freak/DaftBlit repository on GitHub, at the commit this page was made from: the board is board/display/pico-lcd2.8-pack.kicad_pcb and its schematic board/display/pico-lcd2.8-pack.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pico lcd2.8-pack design in my own project?
Its repository states no licence, so its author keeps all rights: ask Daft-Freak before reusing the design.