2 layers
2 layers62.5 × 78 mm
Uv meter v1
Gripsou/ant-blitzUV meter based on STM32
- Size
- 62.5 × 78 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 29
- Pads
- 189
- Tracks, vias
- 232, 61
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241129)
- Created
- 14 Jan 2025
- Updated
- 4 Jun 2025
Overview
Uv meter v1 is an open-source printed circuit board by Gripsou, from the Gripsou/ant-blitz repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 62.5 × 78 mm with 51 parts on 29 nets, routed with 232 tracks and 61 vias.
It is built around the MCP2562-H/P and SK-12F17-G7. Its parts include 17 capacitors, 13 resistors, 6 ICs, 3 connectors and 2 diodes. It belongs with the STM32 boards of this library.
Main components
2README
README.mdant-blitz
UV meter based on STM32
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 0.1uF | uv_meter_v1:0805_GRM | C101, C102, C104, C105, C108, C109, C301, C302, C401, C501, C502 |
| 6 | 22k | uv_meter_v1:RES_0805_ERJ | R401, R402, R403, R404, R405, R406 |
| 3 | 10uF | uv_meter_v1:0805_GRM | C103, C106, C402 |
| 3 | 1uF | uv_meter_v1:0805_GRM | C107, C110, C601 |
| 2 | 1k | uv_meter_v1:RES_0805_ERJ | R302, R305 |
| 2 | 3.3V, 200mA | uv_meter_v1:SOT23-5 | U101, U102 |
| 1 | uv_meter_v1:dummyfp2 | UNK_HOLE_2 | |
| 1 | uv_meter_v1:dummyfp0 | UNK_HOLE_0 | |
| 1 | uv_meter_v1:dummyfp1 | UNK_HOLE_1 | |
| 1 | uv_meter_v1:dummyfp3 | UNK_HOLE_3 | |
| 1 | 100k | uv_meter_v1:RES_0805_ERJ | R601 |
| 1 | 10M | uv_meter_v1:RES_0805_ERJ | R301 |
| 1 | 10k | uv_meter_v1:RES_0805_ERJ | R501 |
| 1 | 125mA | uv_meter_v1:FUSE_1206 | F101 |
| 1 | 3.3k | uv_meter_v1:RES_0805_ERJ | R303 |
| 1 | 5.1k | uv_meter_v1:RES_0805_VISHAY | R304 |
| 1 | 5V, 200mA | uv_meter_v1:SOT23-5 | U103 |
| 1 | 60V | uv_meter_v1:SOD123_ST | D101 |
| 1 | BUTTON_PTS64 | uv_meter_v1:BUTTON_PUSH_CK | SW601 |
| 1 | CONN_DC_PWR_JACK | uv_meter_v1:CONN_DC_PWR_JACK | J101 |
| 1 | GREEN | uv_meter_v1:LED_0805 | LD603 |
| 1 | LMV358ST | uv_meter_v1:SOIC8 | U301 |
| 1 | MCP2562 | uv_meter_v1:SO_8 | U501 |
| 1 | RED | uv_meter_v1:LED_0805 | LD601 |
| 1 | SD | uv_meter_v1:CONN_SD_5033981892 | J401 |
| 1 | SK-12F17-G | uv_meter_v1:COMMUTATOR_SK-12F17-G | SW101 |
| 1 | Socket STM32 | uv_meter_v1:SOCKET_STM32 | U201 |
| 1 | UV_340NM | uv_meter_v1:PHOTODIODE_MOLDED | D301 |
| 1 | VH | uv_meter_v1:JST_VH_2F_SIDE | J501 |
| 1 | YELLOW | uv_meter_v1:LED_0805 | LD602 |
Questions
How big is the Uv meter v1 PCB?
It measures 62.5 × 78 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Uv meter v1 use?
51 parts, built around the MCP2562-H/P and SK-12F17-G7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Uv meter v1 KiCad files?
From the Gripsou/ant-blitz repository on GitHub, at the commit this page was made from: the board is uv_meter_v1.v9/uv_meter_v1.kicad_pcb and its schematic uv_meter_v1.v8/uv_meter_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Uv meter v1 design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers40 × 40 mm
CANBoard
corygrant/CANBoard
Hardware - CAN enabled small input / output expansion board. Switch panels, steering wheel buttons/knobs, etc.
83 parts53MIT - 4 layers108 × 54 mm
MCU Powertrain
mark-belbin/motor-controller
Custom FOC motor controller designed for underwater robotics.
163 parts43GPL-3.0 - 2 layers86.4 × 54.6 mm
- 4 layers100 × 54 mm
- 2 layers
- 2 layers160 × 100 mm
Marine gps
mbouyer/marine_chartplotter
Hardware and software for an opencpn-based chartplotter
115 parts6BSD-2-Clause - 2 layers100 × 50 mm
