
Astable badge
gowenrw/astable_badge
BSidesDFW 2021 Badge - Astable Multivibrator - Learn To DIY

BSidesDFW 2021 Badge - Astable Multivibrator - Learn To DIY
Astable dev is an open-source printed circuit board by gowenrw, from the gowenrw/astable_badge repository on GitHub, published under the MIT licence. It is a 2-layer board of 43.2 × 45 mm with 22 parts on 12 nets, routed with 82 tracks and 0 vias.
It is built around the 2N2222A. Its parts include 6 resistors, 2 capacitors, 2 diodes and 2 transistors.
BSidesDFW 2021 Badge - Astable Multivibrator - Learn To Solder/Electronics/DIY
This is where all the files for the astable_badge will be stored.
This includes code and art and cad and fab files. All the things.
This is the file structure of this repository
Note: the reference_parts directory a link to a submodule repository. To add it use the following cmd after downloading this template:
git submodule add https://github.com/gowenrw/reference_parts reference_partsThis will make a link to the current commit of that repo. To update it to a newer commit after its been added use this cmd:
git submodule update --recursive| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0-30K Ohms | 0_local:R_Potentiometer_3pin_THT_5mm_backsilk_anno | RV1, RV2 |
| 2 | 10 Ohms | 0_local:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal_backsilk | R5, R6 |
| 2 | 100 uF | 0_local:CP_Radial_D5.0mm_P2.00mm_backsilk | C1, C2 |
| 2 | 1K Ohms | 0_local:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal_backsilk | R1, R2 |
| 2 | 2N2222A | 0_local:Q_2222A_TO-92_Inline_back-silk | Q1, Q2 |
| 2 | 510 Ohms | 0_local:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal_backsilk | R3, R4 |
| 2 | LED | 0_local:LED_D3.0mm-2_backsilk | D1, D2 |
| 1 | CR2032 3V | 0_local:BatteryHolder_CR2032-BS-2-1_Front_backsilk | BT1 |
| 1 | LOGO | 0_alt_bier:logo-alt_bier-1200dpi-8x19mm-front | G*** |
| 1 | Test Point 1 | 0_local:Conn_Pin_Header_Hole_1x01_Pitch2.54mm | TP1 |
| 1 | Test Point 2 | 0_local:Conn_Pin_Header_Hole_1x01_Pitch2.54mm | TP2 |
| 1 | Test Point 3 | 0_local:Conn_Pin_Header_Hole_1x01_Pitch2.54mm | TP3 |
| 1 | Test Point 4 | 0_local:Conn_Pin_Header_Hole_1x01_Pitch2.54mm | TP4 |
| 1 | Test Point Connector | 0_local:Conn_Pin_Header_Hole_1x05_Pitch2.54mm | TPJ1 |
| 1 | Test Point GND1 | 0_local:Conn_Pin_Header_Hole_1x01_Pitch2.54mm | GND |

gowenrw/astable_badge
BSidesDFW 2021 Badge - Astable Multivibrator - Learn To DIY


lynchaj/rhyophyre
Single Board Computer featuring Zilog Z180 processor and NEC µPD7220 Graphics Display Controller

alvaroalea/QL_QsoundQprint_clone
A clone board of the Sound card for the Sinclair QL Computer.

profdc9/NixieClock
A Nixie clock that uses IN-14 tubes and very generic components that can be easily sourced.

jensma-de/MM58167-ISA-RTC
RTC module for the ISA slot. With schematics, project files in kicad and open source software to drive the clock.


gidim/e61-gauge
An analog temperature gauge for E61 espresso machines. A custom PCB drives a VID6606 stepper motor gauge needle, reading temperature from an NTC thermistor.

cnobile2012/Li-IonBatteryProtection
Circuit to protect Li-Ion and Li-Po batteries at the cell level.
It measures 43.2 × 45 mm and has 2 copper layers, 1.6 mm thick.
22 parts, built around the 2N2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gowenrw/astable_badge repository on GitHub, at the commit this page was made from: the board is eda/astable_dev/astable_dev.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).