
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

BSidesDFW 2018 Badge Design Files
BSidesDFW 2018 Badge is an open-source printed circuit board by gowenrw, from the gowenrw/BSidesDFW_2018_Badge repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 93.6 × 117.3 mm with 8 parts on 17 nets, routed with 234 tracks and 4 vias.
It is built around the RJ45. Its parts include 4 connectors and 2 capacitors. It belongs with the lEDs and displays boards of this library.
BSidesDFW 2018 Badge Design Files
This design is based on the Throwing Star LAN TAP by Michael Ossmann mike@ossmann.com More information about that design is located here: http://greatscottgadgets.com/
The PCB requires the following components to make it a functional LAN TAP:
The original KiCad design files that were sourced by Michael Ossmann are from 2011 and used an older version of Kicad. This caused many library errors when trying to read the files in a more recent version of KiCad.
To minimize the library errors I used KiCad version 4.0.7 which has a similar library structure to the original and then I found the few older files it was looking for as well. Then, once I had it working I copied all the libraries used to local files in the project directory and rewrote the schematic and pcbnew configurations to call these local libraries. Hopefully this allows it to be read and used in later versions of KiCad without issue.
Here is the layout of the project directory:
This is what the badge will look like for conference attendees (red pcb):

Staff and Speakers and Sponsors will all have different colored badges. Examples of these different colored badges are in the images directory.
As always it was a blast to work on a new badge.
-- @alt_bier
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | RJ45 | BSidesDFW_2018_Badge:RJHSE538X | J1, J2, J3, J4 |
| 2 | 220pF | BSidesDFW_2018_Badge:C_Rect_L4.6mm_W2.0mm_P2.50mm_MKS02_FKP02 | C1, C2 |
| 1 | BSLogo | BSidesDFW_2018_Badge:BSidesDFW_2018_Logo_3500dpi | BSLogo |
| 1 | CLogo | BSidesDFW_2018_Badge:CelaneseLogo_300dpi | CLogo |

UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

travisgoodspeed/goodfet
An embedded bus adapter for various microcontrollers and radios.



nv1t/standing-desk-interceptor
I wanted to intercept the communication between my Flexispot standing desk buttons. This is the progress on the project


Severson-Group/AMDC-Hardware
Circuit board designs for controlling advanced motor systems

mfkiwl/KiwiSDR_PCB
KiCAD PCB files for KiwiSDR project including active antenna and bias tee
It measures 93.6 × 117.3 mm and has 2 copper layers, 1.6 mm thick.
8 parts, built around the RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gowenrw/BSidesDFW_2018_Badge repository on GitHub, at the commit this page was made from: the board is BSidesDFW_2018_Badge.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).