Skip to the content
2 layers43.2 × 45 mmAstable dev, the printed circuit board in 3D

BSidesDFW 2021 Badge - Astable Multivibrator - Learn To DIY

Size
43.2 × 45 mm
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
12
Pads
44
Tracks, vias
82, 0
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
17 Aug 2021
Updated
27 Oct 2021

Overview

Astable dev is an open-source printed circuit board by gowenrw, from the gowenrw/astable_badge repository on GitHub, published under the MIT licence. It is a 2-layer board of 43.2 × 45 mm with 22 parts on 12 nets, routed with 82 tracks and 0 vias.

It is built around the 2N2222A. Its parts include 6 resistors, 2 capacitors, 2 diodes and 2 transistors.

Main components

1

README

README.md

astable_badge

BSidesDFW 2021 Badge - Astable Multivibrator - Learn To Solder/Electronics/DIY

This is where all the files for the astable_badge will be stored.
This includes code and art and cad and fab files. All the things.

File Structure

This is the file structure of this repository

  • / - YOU ARE HERE
  • /art/ - Artwork and other graphics created by this project
  • /code/ - All project related Code / Firmware
  • /docs/ - Documentation created by this project including web pages
  • /eda/ - Electronic Design Automation files (i.e. KiCad)
  • /reference_parts/ - Documentation pulled from other sources related to components (this is a submodule, see below)
  • ./README.md - This File
  • ./LICENSE - Currently set to MIT

Note: the reference_parts directory a link to a submodule repository. To add it use the following cmd after downloading this template:

text
git submodule add https://github.com/gowenrw/reference_parts reference_parts

This will make a link to the current commit of that repo. To update it to a newer commit after its been added use this cmd:

text
git submodule update --recursive

Parts

22
QtyValueFootprintReferences
20-30K Ohms0_local:R_Potentiometer_3pin_THT_5mm_backsilk_annoRV1, RV2
210 Ohms0_local:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal_backsilkR5, R6
2100 uF0_local:CP_Radial_D5.0mm_P2.00mm_backsilkC1, C2
21K Ohms0_local:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal_backsilkR1, R2
22N2222A0_local:Q_2222A_TO-92_Inline_back-silkQ1, Q2
2510 Ohms0_local:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal_backsilkR3, R4
2LED0_local:LED_D3.0mm-2_backsilkD1, D2
1CR2032 3V0_local:BatteryHolder_CR2032-BS-2-1_Front_backsilkBT1
1LOGO0_alt_bier:logo-alt_bier-1200dpi-8x19mm-frontG***
1Test Point 10_local:Conn_Pin_Header_Hole_1x01_Pitch2.54mmTP1
1Test Point 20_local:Conn_Pin_Header_Hole_1x01_Pitch2.54mmTP2
1Test Point 30_local:Conn_Pin_Header_Hole_1x01_Pitch2.54mmTP3
1Test Point 40_local:Conn_Pin_Header_Hole_1x01_Pitch2.54mmTP4
1Test Point Connector0_local:Conn_Pin_Header_Hole_1x05_Pitch2.54mmTPJ1
1Test Point GND10_local:Conn_Pin_Header_Hole_1x01_Pitch2.54mmGND

More from gowenrw/astable_badge

1
  • 2 layers108.2 × 137.9 mmAstable badge, the printed circuit board in 3D

    Astable badge

    gowenrw/astable_badge

    BSidesDFW 2021 Badge - Astable Multivibrator - Learn To DIY

    21 partsMIT

Similar boards

  • 2 layers101.5 × 83 mmSd2snes, the printed circuit board in 3D

    Sd2snes

    mrehkopf/sd2snes

    SD card based multi-purpose cartridge for the SNES

    154 parts722GPL-2.0
  • 2 layers279.4 × 203.2 mmZ180GDC, the printed circuit board in 3D

    Z180GDC

    lynchaj/rhyophyre

    Single Board Computer featuring Zilog Z180 processor and NEC µPD7220 Graphics Display Controller

    249 parts12
  • 2 layers99.1 × 99.1 mmQL Qsound10x10, the printed circuit board in 3D

    QL Qsound10x10

    alvaroalea/QL_QsoundQprint_clone

    A clone board of the Sound card for the Sinclair QL Computer.

    23 parts11
  • 2 layers156.5 × 67.5 mmNixieScanDisplay, the printed circuit board in 3D

    NixieScanDisplay

    profdc9/NixieClock

    A Nixie clock that uses IN-14 tubes and very generic components that can be easily sourced.

    106 parts10
  • 2 layers89.3 × 50 mmMM58167-ISA RTC, the printed circuit board in 3D

    MM58167-ISA RTC

    jensma-de/MM58167-ISA-RTC

    RTC module for the ISA slot. With schematics, project files in kicad and open source software to drive the clock.

    29 parts9
  • 2 layers97.6 × 76.8 mm12f675-mppt, the printed circuit board in 3D

    12f675-mppt

    rasberryrabbit/PIC12F675MPPT

    Solar MPPT circuit.

    45 parts9GPL-3.0
  • 2 layers14.6 × 13.6 mmChip and transistor, the printed circuit board in 3D

    Chip and transistor

    gidim/e61-gauge

    An analog temperature gauge for E61 espresso machines. A custom PCB drives a VID6606 stepper motor gauge needle, reading temperature from an NTC thermistor.

    15 parts8
  • 2 layers147.2 × 58.3 mmLi IonBatteryProtection, the printed circuit board in 3D

    Li IonBatteryProtection

    cnobile2012/Li-IonBatteryProtection

    Circuit to protect Li-Ion and Li-Po batteries at the cell level.

    81 parts6MIT

Questions

How big is the Astable dev PCB?

It measures 43.2 × 45 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Astable dev use?

22 parts, built around the 2N2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Astable dev KiCad files?

From the gowenrw/astable_badge repository on GitHub, at the commit this page was made from: the board is eda/astable_dev/astable_dev.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Astable dev design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).