

Bb panel6
Some bits for robots or other control applications
- Size
- 83.5 × 61 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 156
- Nets
- 26
- Pads
- 624
- Tracks, vias
- 1,356, 286
- Pours
- 30
- Routed
- Yes
- KiCad
- KiCad 5 (file 20210108)
- Created
- 18 Mar 2022
- Updated
- 25 Feb 2022
Overview
Bb panel6 is an open-source printed circuit board by goktugh, from the goktugh/robotbits repository on GitHub. It is a 4-layer board of 83.5 × 61 mm with 156 parts on 26 nets, routed with 1,356 tracks and 286 vias.
It is built around the ATTINY13A-SSU, DRV8701PRGE and IRF8313PBF. Its parts include 66 capacitors, 30 resistors, 18 ICs, 18 connectors and 12 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATTINY13A-SSU
SOIC-8-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 6 64Byte 64Byte 8 Bit AVR Built-in FLASH SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)DRV8701PRGE
VQFN-24-EP(4x4)-40℃~+125℃ 1.5V 150mA 300mA 4 5.9V~45V 6mA 800mV Full-Bridge MOSFET Under Voltage Protection、Over Current Protection、Overtemperature protection (OTP) VQFN-24-EP(4x4) Gate Drivers ROHSTexas InstrumentsBrushed DC Motor DriversIRF8313PBF
SO-8-55℃~+175℃ 15.5mΩ@10V 2 N-Channel 2.35V 2W 30V 6nC 760pF 87pF 9.7A SO-8 MOSFETs ROHSInfineon TechnologiesMOSFETs
Parts
156| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C1, C1, C1, C1, C1, C10, C10, C10, C10, C10, C10, C11, C11, C11, C11 +20 |
| 18 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R1, R1, R1, R1, R1, R2, R2, R2, R2, R2, R2, R4, R4, R4, R4 +2 |
| 18 | 22uF 25v | Capacitor_SMD:C_1206_3216Metric | C5, C5, C5, C5, C5, C5, C6, C6, C6, C6, C6, C6, C7, C7, C7, C7 +2 |
| 12 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C2, C2, C2, C2, C2, C2, C4, C4, C4, C4, C4, C4 |
| 12 | IRF8313PBF | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q1, Q1, Q1, Q1, Q1, Q1, Q2, Q2, Q2, Q2, Q2, Q2 |
| 6 | 2.2k | Resistor_SMD:R_0402_1005Metric | R5, R5, R5, R5, R5, R5 |
| 6 | ATtiny13A-SS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U1, U1, U1, U1, U1 |
| 6 | Conn_01x05_Female | beetleback:JST_XH_B5B-XH-AM_doubleside | J1, J1, J1, J1, J1, J1 |
| 6 | DNP | Resistor_SMD:R_0603_1608Metric | R3, R3, R3, R3, R3, R3 |
| 6 | DRV8701P | Package_DFN_QFN:VQFN-24-1EP_4x4mm_P0.5mm_EP2.45x2.45mm | U2, U2, U2, U2, U2, U2 |
| 6 | HT75xx-1-SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U3, U3, U3, U3, U3, U3 |
| 6 | LOGO | beetleback:bbb_logo | G***, G***, G***, G***, G***, G*** |
| 6 | Red LED | LED_SMD:LED_0603_1608Metric | D2, D2, D2, D2, D2, D2 |
| 6 | motor_pad_1 | beetleback:bbb_motorpin | J3, J3, J3, J3, J3, J3 |
| 6 | motor_pad_2 | beetleback:bbb_motorpin | J4, J4, J4, J4, J4, J4 |
More from goktugh/robotbits
12- 2 layers124 × 67 mm

- 2 layers124 × 67 mm

- 4 layers82 × 56.5 mm

- 4 layers82 × 61 mm

- 2 layers110 × 48 mm

- 4 layers32 × 58 mm

- 2 layers52 × 52 mm

- 2 layers77 × 39 mm

- 2 layers41 × 39 mm

- 4 layers19 × 32 mm

- 2 layers43.5 × 15 mm

- 2 layers49.6 × 41.3 mm

Similar boards
- 2 layers80 × 35 mm

VORON V2.0-Expander
thebrakshow/VORON-V2.0-Expander
Expansion PCB to add 3 additional stepper drivers and 2 external PWM fans to a standard RAMPS 1.4 shield
37 parts6 - 8 layers120 × 100 mm

- 2 layers38 × 59 mm

MotorControl
Phylex/MotorControl
MotorControl ============ This Repository has the Kicad source files for an H-Bridge that I want to use in my model RC Boats. It is based around the DRV8701P H-Bridge driver Chip.
39 parts - 4 layers80 × 80 mm

- 2 layers33 × 30 mm

Mora villogo
kissadamfkut/mora_blinker
Simple LED blinker with ATtiny13A for educational purposes
21 parts34MIT - 2 layers200 × 100 mm

Keyboard
dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere
225 parts14Apache-2.0 - 2 layers

TX5823
ep092/TX5823
FPV Sender mit Kanalwahl und konfiguration über SPI. Integriertes OSD mit MAX7456 und Spannungswandlern für 5V, 3,3V und 12V über einen Eingangsspannungsbereich von 8V bis 25.2V.
94 parts9 - 2 layers10.2 × 22.3 mm

Questions
How big is the Bb panel6 PCB?
It measures 83.5 × 61 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Bb panel6 use?
156 parts, built around the ATTINY13A-SSU, DRV8701PRGE and IRF8313PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bb panel6 KiCad files?
From the goktugh/robotbits repository on GitHub, at the commit this page was made from: the board is beetleback/panel6/bb-panel6.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bb panel6 design in my own project?
Its repository states no licence, so its author keeps all rights: ask goktugh before reusing the design.