Skip to the content
2 layers30 × 20 mmGps, the printed circuit board in 3D

La logique de la Glutte ! C'est glutt-o-matique ! 145.725 MHz en JN36BK

Size
30 × 20 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
19
Pads
55
Tracks, vias
80, 22
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
3 Dec 2015
Updated
4 Nov 2026

Overview

Gps is an open-source printed circuit board by Glutte, from the Glutte/glutt-o-matique repository on GitHub. It is a 2-layer board of 30 × 20 mm with 19 parts on 19 nets, routed with 80 tracks and 22 vias.

It is built around the NEO-M8N. Its parts include 4 connectors, 2 capacitors, 1 resistor, 1 IC and 1 inductor. It belongs with the radio and wireless boards and the STM32 boards of this library.

Main components

1

README

README.md

Glutt-o-matique

La nouvelle logique de la Glutte voit le jour ici.

On va utiliser un stm32f4-discovery. La collaboration est gérée à l'aide d'un Trello, qui sert aussi d'aide-mémoire.

La Glutte

L'essence de la glutt-o-matique

Notre but
est que la glutte
fasse des tût-tûts.

Pour faire écho
des beaux QSO
depuis là-haut.

Donner comme retour
entre chaque tour
une lettre nuit et jour

Économiser l'energie
pour la longue vie
de la batterie.

Tout en annoncant
le beau temps
régulièrement.

Structure

La machine d'états

Le PCB de prototype.

Parts

19
QtyValueFootprintReferences
2Conn_01x01Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ2, J3
110RResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR1
122nHInductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolderL1
1330pFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC2
147pFCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC1
1Conn_01x06Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ1
1Conn_CoaxialConnector_Coaxial:SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMountJ4
1DMTestPoint:TestPoint_Pad_1.0x1.0mmTP1
1DPTestPoint:TestPoint_Pad_1.0x1.0mmTP2
1DSELTestPoint:TestPoint_Pad_1.0x1.0mmTP7
1EXTINTTestPoint:TestPoint_Pad_1.0x1.0mmTP5
1LNATestPoint:TestPoint_Pad_1.0x1.0mmTP10
1NEO-M8NRF_GPS:ublox_NEOU1
1SBTestPoint:TestPoint_Pad_1.0x1.0mmTP6
1SCLTestPoint:TestPoint_Pad_1.0x1.0mmTP4
1SDATestPoint:TestPoint_Pad_1.0x1.0mmTP3
1VBKPTestPoint:TestPoint_Pad_1.0x1.0mmTP8
1VUSBTestPoint:TestPoint_Pad_1.0x1.0mmTP9

Similar boards

  • 2 layers63.5 × 63.5 mmMain pcb, the printed circuit board in 3D

    Main pcb

    peterkrull/quad

    Firmware, hardware and documentation for my autonomous quad copter project

    45 parts210GPL-3.0
  • 2 layers65.4 × 41.9 mmCompact design neo, the printed circuit board in 3D

    Compact design neo

    lpechacek/u-blox-gnss-receiver

    Document about design of a GNSS receiver

    41 parts14
  • 4 layers101.5 × 43.6 mmAlcantara v.1.0, the printed circuit board in 3D

    Alcantara v.1.0

    zenitheesc/Alcantara

    Mobile Ground Station for stratospheric probe monitoring and rescue. Goes well with the Zenith Monitor app.

    90 parts5
  • 4 layers45 × 98 mmOfc v3, the printed circuit board in 3D

    Ofc v3

    rland93/ollyfc

    A small rust-embedded flight computer. RTIC, FrSky protocols, and STM32F4 hardware.

    151 parts3MPL-2.0
  • 2 layers100 × 50 mmKiwiigo, the printed circuit board in 3D

    Kiwiigo

    spdidle/kiwiigo

    kiwi on the go

    27 parts2
  • 4 layers75 × 130 mmESP32GPSPCB, the printed circuit board in 3D

    ESP32GPSPCB

    uzzambutt/ESP32_Offline_GPS_MAPS

    just adding it here temporarily to sync hackatime with it!

    67 parts1
  • 4 layers61 × 71 mmHardware challenge, the printed circuit board in 3D

    Hardware challenge

    alienware-sa/harness_tester_challenge

    Harness Tester Challenge Leaderboard · comma.ai/jobs · Discord · X

    25 partsMIT
  • 4 layersMetuorbit, the printed circuit board in 3D

    Metuorbit

    ataberkaslan/metuorbit-pcb

    38 partsApache-2.0

Questions

How big is the Gps PCB?

It measures 30 × 20 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Gps use?

19 parts, built around the NEO-M8N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Gps KiCad files?

From the Glutte/glutt-o-matique repository on GitHub, at the commit this page was made from: the board is kicad/gps/gps.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Gps design in my own project?

Its repository states no licence, so its author keeps all rights: ask Glutte before reusing the design.