Skip to the content
4 layersMetuorbit, the printed circuit board in 3D
Copper layers
4
Thickness
1.6 mm
Parts
38
Nets
64
Pads
174
Tracks, vias
257, 433
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
9 Jul 2026
Updated
2 Aug 2026

Overview

Metuorbit is an open-source printed circuit board by ataberkaslan, from the ataberkaslan/metuorbit-pcb repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board with 38 parts on 64 nets, routed with 257 tracks and 433 vias.

It is built around the BMP388, MP1584EN and BNO055, with the LM1117-3.3, NEO-M8N and IRLZ44N among its other parts. Its parts include 13 resistors, 8 ICs, 4 capacitors, 4 connectors and 3 diodes.

Main components

6

README

README.md

METUORBIT PCB Design

Created by Ataberk ASLAN

License

This project is licensed under Apache 2.0

Parts

38
QtyValueFootprintReferences
61kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR1, R2, R3, R9, R12, R13
410kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR4, R5, R10, R11
310uCapacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_HandSolderC1, C2, C3
3220Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR6, R7, R8
2LEDLED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolderD2, D3
2MountingHole_PadMountingHole:MountingHole_2.2mm_M2_Pad_ViaH1, H2
11N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1
12N3904Package_TO_SOT_THT:TO-92_InlineQ1
1470uCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC4
1BATT InputConnector_Wire:SolderWire-6sqmm_1x02_P14mm_D3.5mm_OD7mmJ2
1BLACKPILLF4Black Pill:BLACKPILLF4IC1
1BMP388Boards:BMP388IC5
1BNO055Boards:BNO055IC3
1BuzzerBuzzer_Beeper:Buzzer_12x9.5RM7.6BZ1
1ESCConnector_JST:JST_SH_BM08B-SRSS-TB_1x08-1MP_P1.00mm_VerticalJ4
1IRLZ44NPackage_TO_SOT_THT:TO-220-3_VerticalQ2
1LM1117-3.3Package_TO_SOT_SMD:SOT-89-3IC7
1LOGOLogos:logoG***
1LoRa E220-900T30DE220-900T30D:MESHNODES-E220-900T30D+22DIC2
1MP1584Boards:MP1584IC8
1MicroSD_ReaderBoards:MicroSD ReaderIC6
1NEO-M8NBoards:NEO-M8NIC4
1Resistive WireTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ1
1SERVO1Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ3

Similar boards

  • 4 layers45 × 98 mmOfc v3, the printed circuit board in 3D

    Ofc v3

    rland93/ollyfc

    A small rust-embedded flight computer. RTIC, FrSky protocols, and STM32F4 hardware.

    151 parts3MPL-2.0
  • 4 layers57.3 × 70.3 mmUAV PAYLOAD CONTROLLER, the printed circuit board in 3D

    UAV PAYLOAD CONTROLLER

    VGManasa/PCB-DESIGNS

    A collection of PCB designs created using KiCad, including power supply, embedded, and electronics learning projects.

    174 parts
  • 2 layers73.7 × 48.9 mmSerialGPS, the printed circuit board in 3D

    SerialGPS

    Ehryk/ehryk.github.com

    Code

    56 parts2
  • 4 layers45.7 × 27.9 mmKapukiTRX hw trx, the printed circuit board in 3D

    KapukiTRX hw trx

    bodri/kapukiTRX-hw-trx

    DIY RC transmitter/receiver system based on SX1280 chipset for RC planes

    98 parts9MIT
  • 2 layers90 × 80 mmVLAD, the printed circuit board in 3D

    VLAD

    icl-rocketry/VLAD-CanSat

    Repository Containing the hardware and firmware of VLAD, a stabby boi who will participate in the Mach-21 CanSat competition

    103 parts1
  • 4 layers63.5 × 63.5 mmCore, the printed circuit board in 3D

    Core

    calstar/cas-core-hw

    Common Avionics Stack - Core Module - Hardware

    91 partsBSD-3-Clause
  • 2 layers67 × 71 mmBigBrother, the printed circuit board in 3D

    BigBrother

    NUSTARS/2020-FDN

    8 parts

Questions

What parts does the Metuorbit use?

38 parts, built around the BMP388, MP1584EN, BNO055 and LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Metuorbit KiCad files?

From the ataberkaslan/metuorbit-pcb repository on GitHub, at the commit this page was made from: the board is metuorbit.kicad_pcb and its schematic metuorbit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Metuorbit design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).