2 layers50.2 × 31.2 mm
MCU Datalogger
futureshocked/KLP4e_MCU-Datalogger
This is the repository for the "MCU Datalogger" project.
31 parts138MIT
2 layers50.8 × 25.4 mm
Arduinio Clone 2 layer
gideonmaina/arduino_clone- Size
- 50.8 × 25.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 31
- Pads
- 97
- Tracks, vias
- 300, 6
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 28 Apr 2022
- Updated
- 18 May 2022
Overview
Arduinio Clone 2 layer is an open-source printed circuit board by gideonmaina, from the gideonmaina/arduino_clone repository on GitHub. It is a 2-layer board of 50.8 × 25.4 mm with 17 parts on 31 nets, routed with 300 tracks and 6 vias.
It is built around the ATMEGA328P-AU and 24LC1025-I/P. Its parts include 4 ICs, 4 connectors, 3 capacitors, 2 resistors and 2 crystals. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
24LC1025-I/P
PDIP-8-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 400kHz 5ms Hardware write protection function、Noise suppression function I2C PDIP-8 EEPROM ROHSMicrochip TechnologyEEPROM
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 220pF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 24LC1025 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2, U4 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | ATmega328P-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U3 |
| 1 | Battery 3V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | Crystal 16MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSoldering | Y2 |
| 1 | Crystal 32MHz | Crystal:Crystal_SMD_MicroCrystal_CC7V-T1A-2Pin_3.2x1.5mm | Y1 |
| 1 | DS1337_GM | Package_SO:SO-8_5.3x6.2mm_P1.27mm | U1 |
| 1 | Digital Pins | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J2 |
| 1 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | Serial | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
Similar boards
- 2 layers42.7 × 24.4 mm
BACEE
futureshocked/KicadLikeAPro-Project-3-BACEE
This is one of the PCB projects from the Kicad Like a Pro book. It contains a two and four layer board that implements an Arduino clone with external EEPROM and a clock.
20 parts19MIT - 4 layers49.3 × 34.1 mm
Dattalogger Board
DevMajed/DataLogger-Board
Hardware PCB Design for AVR-based Datalogger using KiCAD
30 parts4 - 2 layers55.7 × 37.2 mm
- 2 layers41.4 × 27.7 mm
- 4 layers50 × 30 mm
Datalogger v1
GildardoRestrepo/course_electronics_design
Repositorio de actividades entregables del curso de diseño electrónico. UPB 2026-02
35 parts1MIT - 2 layers52.2 × 34.4 mm
MCU DataLoggerPCB
lologog/MCU_DataLogger
A microcontroller-based device for logging and storing data from external sensors. The data is saved to EEPROM memory for later retrieval and analysis
30 parts1MIT - 2 layers51.4 × 38.7 mm
Questions
How big is the Arduinio Clone 2 layer PCB?
It measures 50.8 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Arduinio Clone 2 layer use?
17 parts, built around the ATMEGA328P-AU and 24LC1025-I/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Arduinio Clone 2 layer KiCad files?
From the gideonmaina/arduino_clone repository on GitHub, at the commit this page was made from: the board is Arduinio Clone_2_layer.kicad_pcb and its schematic Arduinio Clone.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Arduinio Clone 2 layer design in my own project?
Its repository states no licence, so its author keeps all rights: ask gideonmaina before reusing the design.