

Cartalk esp32
- Size
- 22.9 × 48.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 62
- Pads
- 157
- Tracks, vias
- 474, 44
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 24 Mar 2024
- Updated
- 23 Apr 2024
Overview
Cartalk esp32 is an open-source printed circuit board by gibsonbailey, from the gibsonbailey/cartalk_esp32_pcb repository on GitHub. It is a 2-layer board of 22.9 × 48.8 mm with 22 parts on 62 nets, routed with 474 tracks and 44 vias.
It is built around the CP2104EK, MMBT2222 and 10118192-0002LF, with the MBR120 among its other parts. Its parts include 6 capacitors, 4 resistors, 3 ICs, 2 diodes and 2 transistors. It belongs with the ESP32 boards of this library.
Main components
4CP2104EK
-- USB Conversion Modules ROHSSilicon LabsUSB Conversion ModulesMMBT2222
SOT-231 NPN 1uA 300mV 300mW 400 40V 600mA 6V NPN SOT-23 Bipolar (BJT) ROHSYONGYUTAIBipolar (BJT)10118192-0002LF
SMD-30℃~+80℃ 1 1.8A 100V 5P Black Female Micro-B Surface Mount, Right Angle USB 2.0 SMD USB Connectors ROHSAmphenolUSB ConnectorsMBR120
SOD-123Schottky DiodesDoeshare
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100K | Resistor_SMD:R_0603_1608Metric | R7, R12 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C4, C7 |
| 2 | TestPoint | TestPoint:TestPoint_THTPad_D3.0mm_Drill1.5mm | TP1, TP2 |
| 2 | mmbt2222 | Package_TO_SOT_SMD:SOT-23-3 | Q1, Q2 |
| 1 | 10118192-0002LF | smd_usb_micro_b_connector:CONN_10118192-0002LF_AMP | J1 |
| 1 | 10K | Resistor_SMD:R_Array_Convex_4x0603 | R13 |
| 1 | 10µF | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 10µF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | AP2112-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | CP2104 | CP2104:QFN50P400X400X80-25N | IC1 |
| 1 | ESP32_WROOM32_SKINNY | RF_Module:ESP32-WROOM-32 | X2 |
| 1 | HUB75 Connector Female | Connector:Amphenol 2x8 Connector 89898-308ALF | U1 |
| 1 | KMR2 | smd_button:PTS645SL43SMTR92LFS_CNK-L | SW2 |
| 1 | MBR120 | Diode_SMD:D_SOD-123 | D4 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D3 |
Similar boards
- 2 layers89 × 76.1 mm

- 2 layers50.8 × 22.9 mm

Adafruit adafruit feather esp8266 huzzah pcb adafruit esp8266 feather rev e
oomlout/oomlout_oomp_project_bot_v_2
42 parts - 2 layers17.8 × 45.7 mm

CP2102-breakout
autotel/cp2102-UART-breakout
Breakout board for CP2102 USB to UART bridge, to aid the design of boards using this chip.
28 parts - 4 layers75 × 95 mm

- 4 layers102.8 × 86.9 mm

- 2 layers59.2 × 41 mm

- 2 layers108 × 95.3 mm

Blue Wizard
wizarddata/Blue-Wizard-Mod
Bluetooth Controller for the Kinesis Advantage line of keyboards using the BlueMicro firmware
47 parts38 - 4 layers127 × 96.5 mm

Kicad pulse supply rev B
adilet2109/current-sensor
Bare-metal code base for current sensor board
181 parts1
Questions
How big is the Cartalk esp32 PCB?
It measures 22.9 × 48.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Cartalk esp32 use?
22 parts, built around the CP2104EK, MMBT2222, 10118192-0002LF and MBR120. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cartalk esp32 KiCad files?
From the gibsonbailey/cartalk_esp32_pcb repository on GitHub, at the commit this page was made from: the board is cartalk_esp32.kicad_pcb and its schematic cartalk_esp32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cartalk esp32 design in my own project?
Its repository states no licence, so its author keeps all rights: ask gibsonbailey before reusing the design.