4 layers127 × 76.2 mm
Kicad pulse supply rev B
adilet2109/current-sensor
Bare-metal code base for current sensor board
147 parts1
4 layers127 × 96.5 mm
Kicad pulse supply rev B
adilet2109/current-sensor1Bare-metal code base for current sensor board
- Size
- 127 × 96.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 181
- Nets
- 143
- Pads
- 529
- Tracks, vias
- 915, 264
- Pours
- 32
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 8 Feb 2024
- Updated
- 18 Apr 2024
Overview
Kicad pulse supply rev B is an open-source printed circuit board by adilet2109, from the adilet2109/current-sensor repository on GitHub. It is a 4-layer board of 127 × 96.5 mm with 181 parts on 143 nets, routed with 915 tracks and 264 vias.
It is built around the CP2104EK, ESP32-WROOM-32D and LTC6244CMS8#PBF, with the TPS552892RYQR, UCC27611DRVT and AP2112K-3.3 among its other parts. Its parts include 59 capacitors, 52 resistors, 17 diodes, 12 ICs and 3 transistors. It belongs with the ESP32 boards of this library.
Main components
11CP2104EK
-- USB Conversion Modules ROHSSilicon LabsUSB Conversion Modules
ESP32-WROOM-32D
-- WiFi Modules ROHSEspressif SystemsWiFi Modules
LTC6244CMS8#PBF
MSOP-8-40℃~+85℃ -5.25V~5.25V 100uV 105dB 12nV/√Hz@1kHz 1pA 2 2.5uV/℃ 2.8V~6V 35mA 40V/us 75pA Built-in compensation Rail-to-rail output MSOP-8 Operational Amplifier ROHSAnalog DevicesOperational Amplifier
TPS552892RYQR
VQFN-21(3x5)-40℃~+125℃@(TJ) 1 200kHz~2.2MHz 3V~36V 760uA 800mV~22V 8A Adjustable Buck-Boost Buck-Boost Built-in Yes VQFN-21(3x5) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
UCC27611DRVT
WSON-6-EP(2x2)-40℃~+140℃ 1 1.85V~2.25V 14ns 14ns 4A 4V~18V 5ns 5ns 6A 900mV~1.3V Low Side MOSFET Under Voltage Protection WSON-6-EP(2x2) Gate Drivers ROHSTexas InstrumentsGate Drivers
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
BAT17
SOT-231 Independent 250nA@3V 30mA 4V 600mV@10mA SOT-23 Schottky Diodes ROHSNexperiaSchottky DiodesMMBT2222A
SOT-23-55℃~+150℃ 1 NPN 100 100nA 1V 300MHz 300mW 40V 600mA 6V NPN Standalone SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)GAN7R0-150LBE
FCLGA3_3.2X2.2mmFCLGA3_3.2X2.2mm New Arrivals ROHSNexperiaUncategorised
KMR211GLFS
SMD-40℃~+85℃ 1.2N 2.6mm 200,000 Cycles 32V 4.2mm 50mA Gull Wing No Round Button SPST-NO Surface Mount,Vertical Without Bracket SMD Tactile Switches ROHSC&KTactile Switches
MBR120
SOD-123Schottky DiodesDoeshare
README
README.mdcurrent-sensor
Bare-metal code base for current sensor board
Parts
181| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 0u1 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C4, C6, C7, C17, C18, C39, C40, C41, C42, C43, C51, C52, C59 |
| 10 | BAT17 | Package_TO_SOT_SMD:SOT-23 | D8, D9, D10, D11, D12, D13, D14, D15, D16, D17 |
| 9 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R5, R14, R24, R25, R32, R37, R42 |
| 7 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R8, R9, R26, R33, R38, R43 |
| 7 | 2k2 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7, R22, R23, R31, R36, R41 |
| 6 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14, C23, C24, C29, C32, C35 |
| 6 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C15, C16, C20, C53, C57 |
| 5 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C27, C28, C31, C34, C37 |
| 5 | 1M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R27, R28, R34, R39, R44 |
| 5 | 1u5 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C25, C26, C30, C33, C36 |
| 5 | 22 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R29, R30, R35, R40, R45 |
| 5 | 47u | Capacitor_SMD:C_2220_5650Metric | C8, C9, C10, C11, C12 |
| 5 | LTC6244CMS8 | Package_SO:MSOP-8_3x3mm_P0.65mm | U7, U8, U9, U10, U11 |
| 4 | 10u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C44, C54, C55, C56 |
| 4 | MountingHole | MountingHole:MountingHole_3.5mm | H1, H2, H3, H4 |
| 3 | 4u7 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C19, C21, C22 |
| 3 | GND | DW_Library:Keystone-1502-2 | TP4, TP10, TP16 |
| 2 | 0R015 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R19, R20 |
| 2 | 0R03 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R17, R18 |
| 2 | 0R06 | Resistor_SMD:R_2010_5025Metric_Pad1.40x2.65mm_HandSolder | R15, R16 |
| 2 | 0R3 | Resistor_SMD:R_2010_5025Metric_Pad1.40x2.65mm_HandSolder | R10, R11 |
| 2 | 0u1 | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C46, C49 |
| 2 | 10 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R13 |
| 2 | 10 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R50, R51 |
| 2 | 100V 200mA | Diode_SMD:D_SOD-323F | D5, D6 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3 |
| 2 | 330R 700mA | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | FB1, FB2 |
| 2 | MMBT2222* | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21 |
| 1 | 0u22 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C50 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 100p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C47 |
| 1 | 100u | Capacitor_SMD:CP_Elec_6.3x5.8 | C58 |
| 1 | 102k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R46 |
| 1 | 10A_OUT | DW_Library:Keystone-1502-2 | TP12 |
| 1 | 10m | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R52 |
| 1 | 150k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R49 |
| 1 | 1A_OUT | DW_Library:Keystone-1502-2 | TP8 |
| 1 | 20A_OUT | DW_Library:Keystone-1502-2 | TP13 |
| 1 | 22m | Capacitor_THT:CP_Radial_D35.0mm_P10.00mm_SnapIn | C13 |
| 1 | 24V 1W | Diode_SMD:D_SMA | D7 |
| 1 | 27k4 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R47 |
| 1 | 2k | Potentiometer_SMD:Potentiometer_Bourns_3214X_Vertical | RV1 |
| 1 | 4700p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C48 |
| 1 | 49k9 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R48 |
| 1 | 4u7 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C38 |
| 1 | 4u7 | Inductor_SMD:L_Coilcraft_XAL7070-XXX | L1 |
| 1 | 5A_OUT | DW_Library:Keystone-1502-2 | TP11 |
| 1 | 5V | DW_Library:Keystone-1502-2 | TP14 |
| 1 | 68u | DW_Library:PCAP_EEHZ_F_PAN | C45 |
| 1 | ADC_10A | DW_Library:Keystone-1502-2 | TP20 |
| 1 | ADC_1A | DW_Library:Keystone-1502-2 | TP17 |
| 1 | ADC_20A | DW_Library:Keystone-1502-2 | TP21 |
| 1 | ADC_5A | DW_Library:Keystone-1502-2 | TP19 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | CP2104 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U3 |
| 1 | DUT+ | DW_Library:Keystone-1502-2 | TP5 |
| 1 | DUT- | DW_Library:Keystone-1502-2 | TP7 |
| 1 | ESP32-WROOM-32D | RF_Module:ESP32-WROOM-32D | U2 |
| 1 | EXT_VIN | DW_Library:Keystone-1502-2 | TP15 |
| 1 | GAN7R0-150LBE | DW_Library:3-FCLGA_3.2x2.2mm | Q3 |
| 1 | KMR211GLFS | Button_Switch_SMD:SW_Push_1P1T-SH_NO_CK_KMR2xxG | SW1 |
| 1 | MAX4378 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U4 |
| 1 | MBR120 | Diode_SMD:D_SOD-123F | D2 |
| 1 | MCP1703T-5002E/MB | Package_TO_SOT_SMD:SOT-89-3 | U6 |
| 1 | OPT_PEAK | DW_Library:Keystone-1502-2 | TP18 |
| 1 | OPT_PWR | DW_Library:BNC_Molex_0731375003 | J3 |
| 1 | OPT_RAW | DW_Library:Keystone-1502-2 | TP22 |
| 1 | PWR | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | RX | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | SCL | DW_Library:Keystone-1502-2 | TP1 |
| 1 | SDA | DW_Library:Keystone-1502-2 | TP2 |
| 1 | SIG_EXT | DW_Library:Keystone-1502-2 | TP9 |
| 1 | SIG_EXT | DW_Library:BNC_Molex_0731375003 | J2 |
| 1 | SIG_SEL | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | TPS552892RYQR | DW_Library:CONV_TPS552892RYQR | U12 |
| 1 | TPS_VCAP | TestPoint:TestPoint_Pad_D2.5mm | TP23 |
| 1 | TX | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 1 | UCC27611DRVT | DW_Library:UCC27611DRVT | U5 |
| 1 | USB_B_Micro | DW_Library:USB_Micro-B_Amphenol_10118194_Horizontal | J1 |
The 177 most common of 181 parts.
More from adilet2109/current-sensor
1Similar boards
- 2 layers50.8 × 25.4 mm
ESP32
vul-os/sirboard
Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.
49 parts56Apache-2.0 - 4 layers78.4 × 93.5 mm
LLC GaN Protoboard
btanqy/LLC-GaN-Protoboard
This board will be a prototype GaN based LLC converter, with a target rating of 80W with 24V input to 400V output, ideally for renewable power conversion and high voltage applications in plasma generation.
64 parts - 2 layers41.6 × 42 mm
- 2 layers45.7 × 26.7 mm
- 2 layers83.4 × 58 mm
- 2 layers50 × 50 mm
- 2 layers59.2 × 41 mm
- 2 layers79.8 × 66.8 mm
Questions
How big is the Kicad pulse supply rev B PCB?
It measures 127 × 96.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Kicad pulse supply rev B use?
181 parts, built around the CP2104EK, ESP32-WROOM-32D, LTC6244CMS8#PBF and TPS552892RYQR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kicad pulse supply rev B KiCad files?
From the adilet2109/current-sensor repository on GitHub, at the commit this page was made from: the board is hardware/kicad_pulse_supply-rev-B/kicad_pulse_supply-rev-B.kicad_pcb and its schematic hardware/kicad_pulse_supply-rev-B/buck-boost-supply.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kicad pulse supply rev B design in my own project?
Its repository states no licence, so its author keeps all rights: ask adilet2109 before reusing the design.