4 layers100.9 × 77.5 mm
Ym2610-pcb
dan-rodrigues/ym2610-pcb
FPGA-based PCB to control a YM2610 sound synthesis chip.
168 parts31
2 layers76 × 100 mm
4IDEAdapter
gianlucarenzi/4IDEAdapter194 ATA/ATAPI IDE Interface for Commodore Amiga 1200 and Amiga 600 computers
- Size
- 76 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 50
- Pads
- 194
- Tracks, vias
- 812, 41
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 1 Mar 2019
- Updated
- 1 Nov 2025
Overview
4IDEAdapter is an open-source printed circuit board by gianlucarenzi, from the gianlucarenzi/4IDEAdapter repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 76 × 100 mm with 18 parts on 50 nets, routed with 812 tracks and 41 vias.
It is built around the 74LVC2G08. Its parts include 3 resistors, 3 diodes and 1 IC. It belongs with the retro computing and games boards of this library.
Main components
1README
readme.mdAmiga 4 IDE Hard Parallel ATA Adapter
Created by Gianluca Renzi (C) 2019 E-Mail: icjtqr@gmail.com gianlucarenzi@eurek.it
What is it?
It is a simple but powerful adapter to use internally in any Amiga 1200 or Amiga 600 Computer installed in a tower-like case! It must be connected to the IDE 44-pin interface on the motherboard to drive up to 4 ATA/ATAPI devices like Hard Drives, DVD Rom Drives and compatible drives.
This project follow the same DIY project in Aminet (search 4IDE in docs/hw) or simply check out here:
Software
Hardware Point-Of-View
This board has three indipendent activity leds, one for each channel. Moreover the activity leds are merged together in the motherboard so the HDD led nearby the floppy connector can be used as the only activity led.
TODO
May be it can be useful to add a 90-degrees rise connector if the system has some sort of bus board, just to let this board flat as the motherboard.
Images
Whats changed?
V2.2 Added Aminet Stuff
Licence
This entire project is available under the GNU General Public License v3 licence. See licence.txt for more details.
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1N4148 | Diodes_SMD:SMA_Handsoldering | D1, D2, D3 |
| 3 | 330 | Resistors_SMD:R_1206_HandSoldering | R1, R2, R3 |
| 3 | LED | LEDs:LED_1206 | ACT.1, ACT.2, ACT.3 |
| 2 | CONN_02X20 | RetroBitLab:IDC-Header_2x20_P2.54mm_Vertical_Lock | scsi.device.bus.1, scsi.device.bus.2 |
| 1 | 74LVC2G08 | Housings_SSOP:TSSOP-8_3x3mm_Pitch0.65mm | U1 |
| 1 | CONN_02X22 | RetroBitLab:Socket_IDC_2x22_2.00mm_PCB | AMIGA_MOTHERBOARD_1 |
| 1 | KiCad-Logo2_12mm_SilkScreen | Symbol:KiCad-Logo2_12mm_SilkScreen | WBLOGO |
| 1 | LOGO | RetroBitLab:amigaWorkBench1 | G*** |
| 1 | LOGO | RetroBitLab:amigaLogo_BW_31x12mm | G*** |
| 1 | conn_CONN_02X22 | RetroBitLab:PinHeader_2x22_P2.00mm_Vertical | scsi.device.44pin.1 |
The 17 most common of 18 parts.
Similar boards
- 2 layers98 × 119.5 mm
- 4 layers157 × 100 mm
Spr23e bmu
derlucae98/spr23e-bmu
Battery Management Unit for the Scuderia Mensa SPR23e/SPR24e electric race car
433 parts1MIT - 4 layers73.5 × 76.5 mm
- 2 layers118.3 × 110.7 mm
HiveCam
BioroboticsLab/bb_irflash
Hard- and software for the 2016-style IR flash system of the beesbook project. Original code/hardware design done by hmoenck.
133 partsApache-2.0 - 4 layers94.5 × 80.5 mm
ReboostV2.1 fixed
fl4p/dcdc-parasitics
KiCad → FastHenry extractor for half-bridge power-stage parasitics (commutation-loop L, common-source inductance, gate-loop L/R) → SPICE subckt + SVG schematic
184 parts - 4 layers
Titanrio
ggarciabaez/titanrio
A RoboRIO-Inspired Expansion board for Robotics. Mostly for funsies + learning.
83 parts - 2 layers
Questions
How big is the 4IDEAdapter PCB?
It measures 76 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 4IDEAdapter use?
18 parts, built around the 74LVC2G08. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 4IDEAdapter KiCad files?
From the gianlucarenzi/4IDEAdapter repository on GitHub, at the commit this page was made from: the board is 4IDEAdapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 4IDEAdapter design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).