

ATMEGA DevBoard
- Size
- 85.6 × 31 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 44
- Pads
- 152
- Tracks, vias
- 329, 41
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 20 May 2022
- Updated
- 20 Sep 2026
Overview
ATMEGA DevBoard is an open-source printed circuit board by gfm16617, from the gfm16617/EngrEDU_Website repository on GitHub. It is a 2-layer board of 85.6 × 31 mm with 31 parts on 44 nets, routed with 329 tracks and 41 vias.
It is built around the ATMEGA32U4-AU, LP2985-33DBV and USBLC6-2SC6, with the PTS526 SM08 SMTR2 LFS among its other parts. Its parts include 14 capacitors, 6 connectors, 4 resistors, 3 ICs and 1 diode. It belongs with the microcontroller boards boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
4ATMEGA32U4-AU
QFP-44(10x10)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH QFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)LP2985-33DBV
SOT-23-5-40℃~+125℃@(Tj) 1 150mA 16V 3.3V 30uVrms 45dB@(1kHz) 575mV@(150mA) 850uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Noise bypass terminal Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)PTS526 SM08 SMTR2 LFS
SMD-20℃~+70℃ 1.6N 12V 50mA Gull Wing IP40 SPST-NO Surface Mount,Vertical SMD Tactile Switches ROHSC&KTactile Switches
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C4, C5, C6, C7, C10, C11, C12 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C9, C13 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric | R14, R15 |
| 2 | 22p | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 1 | +3.3V_Conn | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | +5V_Conn | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C15 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 16MHz | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C14 |
| 1 | ATMEGA_ConnLeft | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J3 |
| 1 | ATMEGA_ConnRight | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J4 |
| 1 | ATmega32U4-A | Package_QFP:TQFP-44_10x10mm_P0.8mm | U3 |
| 1 | AVR-ISP-6 | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D3 |
| 1 | LP2985-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | PTCSMD | Fuse:Fuse_1812_4532Metric | F1 |
| 1 | PTS526_SM08_SMTR2_LFS | PTS526_SMD_Button:PTS526_SMD_Button | S3 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | USB_B_Mini | Connector_USB:USB_Mini-B_Lumberg_2486_01_Horizontal | J2 |
More from gfm16617/EngrEDU_Website
12- 2 layers99.1 × 97.1 mm

- 4 layers68.6 × 53.3 mm

- 4 layers68.6 × 53.3 mm

- 2 layers98 × 87 mm

- 2 layers90 × 52.1 mm

- 2 layers81.3 × 100 mm

- 2 layers68.6 × 53.4 mm

- 2 layers81.3 × 100 mm

- 2 layers90 × 60 mm

- 2 layers85.6 × 63 mm

- 2 layers90 × 55 mm

- 2 layers83.8 × 53.3 mm

Similar boards
- 2 layers90 × 62.1 mm

- 2 layers83.9 × 61.3 mm

Phase B PCB Prototype
zbayler/ENCE_3221_Class2023
Embedded Systems kitchen timer class project. From designing an Arduino shield to a standalone PCB and all the code required.
53 parts - 2 layers94.5 × 89.3 mm

- 2 layers49.5 × 57.7 mm

- 2 layers68.6 × 53.3 mm

- 2 layers50 × 50 mm

Flight Controller PCB
MarkSherstan/Drone
Mechanical, electrical, and software package for a custom quadcopter drone.
78 parts3MIT - 2 layers36.5 × 56 mm

- 2 layers101.5 × 53.3 mm

Questions
How big is the ATMEGA DevBoard PCB?
It measures 85.6 × 31 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ATMEGA DevBoard use?
31 parts, built around the ATMEGA32U4-AU, LP2985-33DBV, USBLC6-2SC6 and PTS526 SM08 SMTR2 LFS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ATMEGA DevBoard KiCad files?
From the gfm16617/EngrEDU_Website repository on GitHub, at the commit this page was made from: the board is Class_Projects/Embedded_Systems/ATMEGA_Dev_Board/PCB_Design/ATMEGA_DevBoard/ATMEGA_DevBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ATMEGA DevBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask gfm16617 before reusing the design.