

STM32F405 DDS Generator
- Size
- 99.1 × 97.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 120
- Nets
- 140
- Pads
- 432
- Tracks, vias
- 881, 102
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 20 May 2022
- Updated
- 20 Sep 2026
Overview
STM32F405 DDS Generator is an open-source printed circuit board by gfm16617, from the gfm16617/EngrEDU_Website repository on GitHub. It is a 2-layer board of 99.1 × 97.1 mm with 120 parts on 140 nets, routed with 881 tracks and 102 vias.
It is built around the TL072, FT230XS-R and MC34063AD, with the USBLC6-2SC6, 1N5819WS and 10118194-0001LF among its other parts. Its parts include 44 resistors, 34 capacitors, 7 ICs, 7 diodes and 7 connectors. It belongs with the STM32 boards of this library.
Main components
6TL072
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 10V/us 10mV 2 2.5nA 3MHz 85dB SOP-8 Operational Amplifier ROHSGcoreOperational AmplifierFT230XS-R
SSOP-16-150mil-40℃~+85℃ 125uA 3.3V~5V 8mA USB 2.0 USB to UART SSOP-16-150mil USB Converters ROHSFTDIUSB ConvertersMC34063AD
SOIC-80℃~+70℃@(TA) 1 1.25V~40V 1.5A 100kHz 3V~40V Adjustable Boost、Buck Buck、Boost Built-in No SOIC-8 DC-DC Converters ROHSonsemiDC-DC ConvertersUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky Diodes10118194-0001LF
SMD-30℃~+80℃ 1 100V 5P Black Female Micro-B USB 2.0 SMD USB Connectors ROHSAmphenolUSB Connectors
Parts
120| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 20k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R14, R15, R16, R18, R20, R22, R24, R26, R27, R34, R37, R38, R40, R41, R42 +1 |
| 12 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C13, C14, C17, C19, C20, C21, C22 |
| 10 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R11, R13, R17, R19, R21, R23, R25, R31, R36 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15, C16, C28, C29 |
| 4 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R6, R29, R39 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 100pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C32, C33, C34 |
| 3 | 1N5819WS | Diode_SMD:D_SOD-123 | D5, D6, D7 |
| 2 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R32, R33 |
| 2 | 0.01uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C18 |
| 2 | 100uF | Cap_Ele_100uF_16V_SMD:CAP_WCAP-ASLI_06p3X05p5_WRE | C26, C30 |
| 2 | 15pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C12 |
| 2 | 2.2uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8 |
| 2 | 22R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C10 |
| 2 | 270 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8 |
| 2 | 27R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10 |
| 2 | 470uF | Cap_Ele_470uF_16V_SMD:CAP_WCAP-ASLL_08p0X10p5_WRE | C25, C27 |
| 2 | PWR_LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 2 | TL072 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4, U6 |
| 1 | 100k | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Vertical | RV4 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R35 |
| 1 | 10118194-0001LF | USB_B_Micro_Amphenol:AMPHENOL_10118194-0001LF | J2 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 180 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R30 |
| 1 | 1M | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Vertical | RV5 |
| 1 | 1k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV2 |
| 1 | 20k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV3 |
| 1 | 220uF | Cap_Ele_220uF_16V_SMD:CAP_WCAP-ASLI_04p0X05p5_WRE | C23 |
| 1 | 3 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R28 |
| 1 | 330R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 470pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C24 |
| 1 | 49.9 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R44 |
| 1 | 680pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C35 |
| 1 | 680uH | 744066681_680uH:IND_1038-WE-TPC_WRE | L1 |
| 1 | BNC_CONN | BNC_RightAngle_50ohm:BNC_RightAngle_50ohm | J8 |
| 1 | DC_OFFSET_CONN | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J7 |
| 1 | FILTER_CONN | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J6 |
| 1 | FT230XS | Package_SO:SSOP-16_3.9x4.9mm_P0.635mm | U5 |
| 1 | LCD_CONN | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J5 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | LOGO | LOGO | G*** |
| 1 | MC34063AD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | PTCSMD | Fuse:Fuse_1812_4532Metric | F1 |
| 1 | RXLED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | STM32F405RGTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | SWD_CONN | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | SW_BOOT | JS202011SCQN_Button:SW_JS202011SCQN | S1 |
| 1 | SW_CURSOR | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW3 |
| 1 | SW_MINUS | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW5 |
| 1 | SW_MODE | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW2 |
| 1 | SW_PLUS | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW4 |
| 1 | SW_RESET | PTS636_SM25F_Button:PTS636SM25FSMTRLFS | SW1 |
| 1 | SW_RUN_STOP | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW6 |
| 1 | TXLED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_B_Mini | Connector_USB:USB_Mini-B_Wuerth_65100516121_Horizontal | J1 |
| 1 | XTAL_32.768KHZ | ABS25-32.768KHZ:XTAL_ABS25-32.768KHZ-1-T | Y2 |
| 1 | XTAL_8.0MHZ | ABLSG-8.000MHZ-D-2-Y-T:XTAL_ABLSG-8.000MHZ-D-2-Y-T | Y1 |
More from gfm16617/EngrEDU_Website
12- 4 layers68.6 × 53.3 mm

- 4 layers68.6 × 53.3 mm

- 2 layers98 × 87 mm

- 2 layers90 × 52.1 mm

- 2 layers81.3 × 100 mm

- 2 layers68.6 × 53.4 mm

- 2 layers81.3 × 100 mm

- 2 layers90 × 60 mm

- 2 layers85.6 × 63 mm

- 2 layers90 × 55 mm

- 2 layers83.8 × 53.3 mm

- 2 layers87 × 33 mm

Similar boards
- 4 layers123.5 × 108.7 mm

Shredder pcb
jackmday-uofa/compact-shredder-pcb
PCB schematic and design for the Compact Shredder Design Version 2
114 parts - 4 layers40 × 110 mm

MMM main
niektb/sluisbrinkie-eurorack-published
Published Modules of the Sluisbrinkie project
145 parts34 - 2 layers100 × 74 mm

Qym solder
basson/qym-solder
QymSolder - Soldering station three in one - hakko t12, hot air gun, d909/898D or analog.
135 parts4GPL-3.0 - 4 layers100 × 60 mm

- 2 layers88.2 × 32.2 mm

- 2 layers40.3 × 100 mm

Dodecamodulator
adeboni/eurorack
This repository stores various eurorack module designs I've made
109 parts1GPL-3.0 - 2 layers90 × 62 mm

Panel
Tomoshibi-technology/RCJ-Japan2024-Circuit
RoboCup JapanOpen 2024とEindohoven 2024に向けての回路開発
120 parts1MIT - 2 layers147.4 × 63.2 mm

Guitar down octave
MR-DOS/guitar_down_octave
A octave-down effect for guitar. All analog, no microcontroller, no DSP.
219 parts5GPL-3.0
Questions
How big is the STM32F405 DDS Generator PCB?
It measures 99.1 × 97.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the STM32F405 DDS Generator use?
120 parts, built around the TL072, FT230XS-R, MC34063AD and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STM32F405 DDS Generator KiCad files?
From the gfm16617/EngrEDU_Website repository on GitHub, at the commit this page was made from: the board is Class_Projects/Embedded_Systems/DDS_Function_Generator/STM32F405_Board/PCB_Design/STM32F405_DDS_Generator/STM32F405_DDS_Generator.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the STM32F405 DDS Generator design in my own project?
Its repository states no licence, so its author keeps all rights: ask gfm16617 before reusing the design.