2 layers65 × 30 mm
CANFDZeroHAT
generationmake/CANFDZeroHAT
Raspberry Pi HAT with Microchip MCP2518FD CAN FD controller
32 parts27
2 layers21 × 25 mm
DronecodeCANAdapter
generationmake/DronecodeCANAdapterSmall PCB with CAN transceiver and dronecode connectors JST GH
- Size
- 21 × 25 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 12
- Pads
- 51
- Tracks, vias
- 112, 8
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 2 Jan 2021
- Updated
- 26 Jan 2021
Overview
DronecodeCANAdapter is an open-source printed circuit board by generationmake, from the generationmake/DronecodeCANAdapter repository on GitHub. It is a 2-layer board of 21 × 25 mm with 18 parts on 12 nets, routed with 112 tracks and 8 vias.
It is built around the 0ZCM0020FF2G, 150060GS75000 and 150060RS75000, with the 150060YS75000 among its other parts. Its parts include 4 resistors, 4 diodes, 4 connectors, 1 capacitor and 1 IC.
Main components
4
0ZCM0020FF2G
0603-40℃~+85℃ 100ms 200mA 3.5Ω 40A 450mA 500mW 550mΩ 9V 0603 Resettable Fuses ROHSBel FuseResettable Fuses
150060GS75000
0603-40℃~+85℃ 140° 20mA 3.2V 430mcd 515nm 525nm Discrete Diode Green Water Clear 0603 LED Indication - Discrete ROHSWürth ElektronikLED Indication - Discrete150060RS75000
0603-40℃~+85℃ 140° 20mA 250mcd 2V 625nm 630nm Discrete Diode Red Water Clear 0603 LED Indication - Discrete ROHSWürth ElektronikLight Emitting Diodes (LED)150060YS75000
0603Infrared LED EmittersWürth Elektronik
README
README.mdDronecodeCANAdapter
Small PCB with CAN transceiver and dronecode connectors JST GH
PCB
Top
Bottom
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1k | resistors:R_0603 | R1, R2 |
| 2 | GH_SM04B-GHS-TB | Connector_JST:JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | CN3, CN4 |
| 2 | MHP_3.2_5.0 | MECH_mounting_holes:MHP_3.2_5.0 | MECH1, MECH2 |
| 1 | 0ZCM0020FF2G | resistors:R_0603 | F1 |
| 1 | 100nF | capacitors:C_0603 | C1 |
| 1 | 150060GS75000 | LEDs:LED_0603 | D1 |
| 1 | 150060RS75000 | LEDs:LED_0603 | D2 |
| 1 | 150060YS75000 | LEDs:LED_0603 | D3 |
| 1 | 2k | resistors:R_0603 | R3 |
| 1 | 691322310004 | CON_wuerth:WR-TBL_691322310004 | CN2 |
| 1 | CONN_01X05 | pin_headers:Pin_Header_Straight_1x05 | CN1 |
| 1 | DNI | resistors:R_0603 | R4 |
| 1 | DNI | diodes:SOD-123 | D4 |
| 1 | Label | labels:generationmake_small_silk | L1 |
| 1 | TCAN332GDR | SOIC:SOIJ-8_5.3x5.3mm_Pitch1.27mm | U1 |
Questions
How big is the DronecodeCANAdapter PCB?
It measures 21 × 25 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DronecodeCANAdapter use?
18 parts, built around the 0ZCM0020FF2G, 150060GS75000, 150060RS75000 and 150060YS75000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DronecodeCANAdapter KiCad files?
From the generationmake/DronecodeCANAdapter repository on GitHub, at the commit this page was made from: the board is kicad_source/DronecodeCANAdapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DronecodeCANAdapter design in my own project?
Its repository states no licence, so its author keeps all rights: ask generationmake before reusing the design.
Similar boards
- 4 layers80 × 80.1 mm
Chassis
ut-ras/robomaster_hardware
Welcome! Please read the Wiki page for information on how to set up your computer and an overview of the projects in this repository.
75 parts3 - 4 layers210 × 100 mm
02 Power Board
ad4363/LuX-ray-PCBs
A repository containing KiCad schematic and pcb files for a wireless radiation detector testing interface
115 parts1 - 4 layers90 × 66 mm
Audio
AndreasNielsen4000/Group-7-IoT-Project
The project is a wireless speaker system that can play music from a Bluetooth or WiFi source. The system consists of four main parts with subcomponents:
162 parts1 - 2 layers84.8 × 53 mm
ArduTrxShield
generationmake/ArduTrxShield
ArduTrx - Open Source Hamradio Transceiver for Arduino
81 parts1 - 4 layers
RoboRyo
KaitoTLex/RoboRyo
This is team1280's replacement for the Robo Rio for more redundant and less annoying controls.
68 parts1MIT - 2 layers120 × 94 mm
Aurelia robotics PCB
DanielCusi/MoonJelly-robotics-PCB
Robotics PCB designed for Eurobot used by Wolvineers.
270 partsCERN-OHL-W-2.0 - 2 layers70 × 55 mm
