2 layers65 × 30 mm
CANFDZeroHAT
generationmake/CANFDZeroHAT
Raspberry Pi HAT with Microchip MCP2518FD CAN FD controller
32 parts27
2 layers84.8 × 53 mm
ArduTrxShield
generationmake/ArduTrxShield1ArduTrx - Open Source Hamradio Transceiver for Arduino
- Size
- 84.8 × 53 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 81
- Nets
- 49
- Pads
- 247
- Tracks, vias
- 625, 47
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Nov 2020
- Updated
- 23 Dec 2020
Overview
ArduTrxShield is an open-source printed circuit board by generationmake, from the generationmake/ArduTrxShield repository on GitHub. It is a 2-layer board of 84.8 × 53 mm with 81 parts on 49 nets, routed with 625 tracks and 47 vias.
It is built around the LM4871, SN74LVC1T45DBV and LM1085IS-ADJ, with the 150060GS75000, 150060RS75000 and 150060YS75000 among its other parts. Its parts include 36 resistors, 20 capacitors, 7 connectors, 5 ICs and 4 diodes. It belongs with the radio and wireless boards of this library.
Main components
8
LM4871
SOP-8-40℃~+85℃ 0.1% 1-Channel 10mA 2.2V~5.5V 3W×1@4Ω、2W×1@4Ω 85dB、90dB Class AB Enable/shutdown function SOP-8 Audio Amplifiers ROHSIDCHIPAudio Amplifiers
SN74LVC1T45DBV
SOT-23-6-40℃~+85℃ 1 1 1.65V~5.5V 1.65V~5.5V 420Mbps Bidirectional Tri-State SOT-23-6 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
LM1085IS-ADJ
TO-263-3-40℃~+125℃@(Tj) 0.003%Vout 1 1.25V~27.5V 1.5V@(3A) 29V 3A 5mA 75dB@(120Hz) Adjustable Over Current Protection、Thermal shutdown Positive TO-263-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
150060GS75000
0603-40℃~+85℃ 140° 20mA 3.2V 430mcd 515nm 525nm Discrete Diode Green Water Clear 0603 LED Indication - Discrete ROHSWürth ElektronikLED Indication - Discrete150060RS75000
0603-40℃~+85℃ 140° 20mA 250mcd 2V 625nm 630nm Discrete Diode Red Water Clear 0603 LED Indication - Discrete ROHSWürth ElektronikLight Emitting Diodes (LED)150060YS75000
0603Infrared LED EmittersWürth Elektronik
BAT46ZFILM
SOD-123SOD-123 Schottky Diodes ROHSTECH PUBLICSchottky Diodes
UWT1A471MNL1GS
SMD,D8xL10mm-55℃~+105℃ 1000hrs@105℃ 10V 10mm 210mA@120Hz 470uF 8mm Polarized ±20% SMD,D8xL10mm Aluminum Electrolytic Capacitors - SMD ROHSNichiconAluminum Electrolytic Capacitors - SMD
README
README.mdArduTrxShield
ArduTrx - Open Source Hamradio Transceiver for Arduino compatible to Arduino Uno
PCB
Top
Bottom
License
This hardware is licensed under the CERN OHL v. 1.2
Parts
81| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100nF | capacitors:C_0603 | C5, C7, C8, C10, C11, C12, C14, C16, C17, C18, C19, C20 |
| 11 | 1k | resistors:R_0603 | R1, R6, R7, R8, R10, R14, R16, R24, R25, R26, R31 |
| 7 | 4k7 | resistors:R_0603 | R2, R12, R13, R21, R27, R33, R34 |
| 6 | DNI | resistors:R_0603 | R4, R5, R28, R29, R30, R32 |
| 5 | 100 | resistors:R_0603 | R3, R9, R11, R18, R22 |
| 3 | 20k | resistors:R_0603 | R19, R20, R36 |
| 3 | 2N7002 | SOT_TO:SOT-23 | Q1, Q2, Q3 |
| 3 | 744912156 | L_filter:WE-CAIR_4248 | L1, L2, L3 |
| 2 | 10uF | capacitors:C_0805 | C6, C9 |
| 2 | 30pF | capacitors:C_0603 | C1, C4 |
| 2 | 47pF | capacitors:C_0603 | C2, C3 |
| 2 | SN74LVC1T45 | SOT_TO:SOT-23-6 | U4, U5 |
| 1 | 100k | resistors:R_0603 | R35 |
| 1 | 121 | resistors:R_0603 | R15 |
| 1 | 150060GS75000 | LEDs:LED_0603 | D3 |
| 1 | 150060RS75000 | LEDs:LED_0603 | D1 |
| 1 | 150060YS75000 | LEDs:LED_0603 | D2 |
| 1 | 1uF | capacitors:C_0603 | C13 |
| 1 | 2k | resistors:R_0603 | R23 |
| 1 | 300 | resistors:R_0603 | R17 |
| 1 | 418117270901 | mechanical-switches:dip_1-300 | S1 |
| 1 | 431256058736 | mechanical-switches:WE_4312x6xxx7x6 | SW1 |
| 1 | 482009514001 | mechanical-switches:ALPS_EC11E | SW2 |
| 1 | 60312202114509 | CON_wuerth:WR-SMA-PCB | CN1 |
| 1 | 61300211121 | pin_headers:Pin_Header_Straight_1x02 | CN6 |
| 1 | 61300311121 | pin_headers:Pin_Header_Straight_1x03 | CN5 |
| 1 | 691322310002 | CON_wuerth:WR-TBL_691322310002 | CN7 |
| 1 | ARDUINO | MODULE_compute:ARDUINO | CN2 |
| 1 | BAT46ZFILM | diodes:SOD-123 | D4 |
| 1 | DRA818 | MODULE_RF:DRA818 | U1 |
| 1 | LM1085IS-ADJ | SOT_TO:TO-263-3Lead | U2 |
| 1 | LM4871 | SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U3 |
| 1 | LUM 1501-03 | CON_lumberg:1501_03 | CN4 |
| 1 | LUM 1503-07 | CON_lumberg:1503_07 | CN3 |
| 1 | UWT1A471MNL1GS | capacitors:c_elec_8x10.5 | C15 |
Similar boards
- 4 layers80 × 80.1 mm
Chassis
ut-ras/robomaster_hardware
Welcome! Please read the Wiki page for information on how to set up your computer and an overview of the projects in this repository.
75 parts3 - 4 layers210 × 100 mm
02 Power Board
ad4363/LuX-ray-PCBs
A repository containing KiCad schematic and pcb files for a wireless radiation detector testing interface
115 parts1 - 4 layers90 × 66 mm
Audio
AndreasNielsen4000/Group-7-IoT-Project
The project is a wireless speaker system that can play music from a Bluetooth or WiFi source. The system consists of four main parts with subcomponents:
162 parts1 - 4 layers
RoboRyo
KaitoTLex/RoboRyo
This is team1280's replacement for the Robo Rio for more redundant and less annoying controls.
68 parts1MIT - 2 layers120 × 94 mm
Aurelia robotics PCB
DanielCusi/MoonJelly-robotics-PCB
Robotics PCB designed for Eurobot used by Wolvineers.
270 partsCERN-OHL-W-2.0 - 2 layers21 × 25 mm
DronecodeCANAdapter
generationmake/DronecodeCANAdapter
Small PCB with CAN transceiver and dronecode connectors JST GH
18 parts - 2 layers110 × 85 mm
BASE IO before cleanup
RSXLX/sunny-the-growing-sunflower-lamp
SUNNY — The Growing Sunflower Lamp | A personal lamp with customizable exteriors, traceable fabrication, and a local creative workspace.
52 parts
Questions
How big is the ArduTrxShield PCB?
It measures 84.8 × 53 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ArduTrxShield use?
81 parts, built around the LM4871, SN74LVC1T45DBV, LM1085IS-ADJ and 150060GS75000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ArduTrxShield KiCad files?
From the generationmake/ArduTrxShield repository on GitHub, at the commit this page was made from: the board is kicad_source/ArduTrxShield.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ArduTrxShield design in my own project?
Its repository states no licence, so its author keeps all rights: ask generationmake before reusing the design.