Skip to the content
2 layers357.2 × 100 mmFortissimo ii, the printed circuit board in 3D

Second attempt at making a split ortholinear coding/multilanguage keyboard.

Size
357.2 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
163
Nets
134
Pads
1,000
Tracks, vias
828, 29
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
4 Jun 2025
Updated
16 Aug 2025

Overview

Fortissimo ii is an open-source printed circuit board by gbtsui, from the gbtsui/fortissimo-ii repository on GitHub. It is a 2-layer board of 357.2 × 100 mm with 163 parts on 134 nets, routed with 828 tracks and 29 vias.

It is built around the PESD5V0S1UL. Its parts include 74 diodes, 69 switches, 4 resistors and 2 connectors. It belongs with the keyboards and input boards and the RP2040 boards of this library.

Main components

1

README

README.md

fortissimo ii

Hello world!

This is my 2nd attempt at building a keyboard.

I really enjoyed hackpad v2 (even though mine ended up broken...) and I wanted an extra little challenge to build something bigger and get better at soldering. So I designed this ortholinear split keyboard that's ideally meant to be perfect for me; ergonomic design, looks cool, a lot of functionality, and on-the-fly custom language switching (eventually - firmware hasn't caught up to that yet!). Since I'm planning on phasing out my laptop when the school year starts to avoid distractions a bit better, I'm going to hopefully replace it with an iPad so I can take notes more effectively. But because I don't have enough money for an iPad keyboard (I'm not shelling out another $160 after buying a $400 device plus a $100 pencil), and I wanted to challenge myself to design something that might be able to replace it, I designed this instead.

Maybe it's not the prettiest case (blame my awful CAD skills, also it's actually asymmetrical in size) and doesn't have the most beautiful design (I'm no electrical engineer), but hopefully it'll work.

Also, yes, this keyboard is piano themed. I like pianos. I am not good at playing piano. But I thought it was a cool concept.

image

image image

Bill of Materials

ItemCost (each)QuantitySubtotalShipping
kailh choc v1 brown$0.48 (10 pack)70$33.60$8.45
trrs jack$0.069 (20 pack)2$1.38$4.35
128x64 SSD1306 OLED$1.152$2.30Free Shipping
digikey---------$8.00
1N4148FS-ND matrix diodes$0.0486 (100 pack)70$4.86-
PESD5V0S1UL ESD protection diode$0.311 (10 pack)6$3.11-
6mm tactile switch$0.151$0.15-
raspberry pi pico$5.751$5.75-
4.7k pull up resistor$0.014 (10 pack)4$0.14-
header pin$1.251$1.25-
M3 10mm heatset insert$0.1826 (50 pack)10$9.13-
M3 10mm screw$0.753 (10 pack)10$7.53-
PCB$6.69 (5 pack, including shipping)1$17.60$12.67 + $3.17

Total: $123.44

Parts

163
QtyValueFootprintReferences
68Dfortissimo-ii:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +52
66SW_Push_45degfortissimo-ii:Low-Profile-Choc-MXSW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +50
6PESD5V0S1ULDiode_SMD:D_SOD-882D35, D36, D37, D72, D73, D74
44.7kfortissimo-ii:R_0603_1608MetricR1, R2, R3, R4
2AudioJack4fortissimo-ii:TRRS-PJ-320AJ1, J2
2RaspberryPi_Picofortissimo-ii:RaspberryPi_Pico_Common_UnspecifiedA1, A2
2SSD1306fortissimo-ii:128x64OLEDBrd1, Brd2
2SW_Push_45degfortissimo-ii:MX-Alps-Choc-2U-StabFlipSW34, SW40
1LANGfortissimo-ii:SW_PUSH_6mmSW35

The 153 most common of 163 parts.

Similar boards

  • 2 layers405 × 135 mmKeyboard, the printed circuit board in 3D

    Keyboard

    jasperhax0r/CompaqPortableKeyboard

    Mechanical Keyboard for the original Compaq Portable XT-Class

    188 parts2MIT
  • 4 layers80 × 49 mmPIB, the printed circuit board in 3D

    PIB

    apexsat/payload-electrical

    PCBs for payload

    319 parts1
  • 4 layers90 × 36 mmA3-before crystal refinement, the printed circuit board in 3D

    A3-before crystal refinement

    bdini13/esp32-cc1101-multiband

    Work-in-progress ESP32-WROOM-32E + CC1101 multiband PCB: software-selected 315/433/868/915 MHz paths. AI-assisted engineering draft; not manufacturing-ready.

    121 parts1
  • 4 layers36.5 × 46 mmSpinali mcxn t1 f9p, the printed circuit board in 3D

    Spinali mcxn t1 f9p

    CogniPilot/spinali_mcxn_t1_shields

    Design files for MCXN-T1-Shields

    89 parts1
  • 2 layers80 × 65 mmPixAppleV1.0, the printed circuit board in 3D

    PixAppleV1.0

    mrkingseasheep/PixApple

    PixApple is designed as a RP2040 breakout board. It features 8 general use GPIOs, 1 SPI interface, 1 I2C interface, 4 ADC channels, 4 PWM channels and a CAN bus.

    85 parts1GPL-3.0
  • 2 layers110 × 70 mmPinaBiosensor Mini, the printed circuit board in 3D

    PinaBiosensor Mini

    AlejandroPina/PinaBioHw

    Non-medical biofeedback PCB: GSR, PPG/HRV, skin temperature, lab ECG, and two resistive breath belts on a Seeed XIAO ESP32-S3.

    55 parts
  • 4 layers58 × 19.5 mmAam bom pcb, the printed circuit board in 3D

    Aam bom pcb

    antonavhmx/AAM-PCB-

    Este repositorio contiene el diseño de hardware y los archivos de manufactura industrial para una tarjeta de circuito impreso de 4 capas.

    39 parts
  • 2 layers50 × 50 mmEsp data logger board, the printed circuit board in 3D

    Esp data logger board

    attahiruj/kicad-evaltor

    A Python library for validating KiCad designs programmatically. Describe the properties a design is supposed to have, reference designators, values, connectivity, footprint assignment, ERC and DRC results, routing…

    46 partsMIT

Questions

How big is the Fortissimo ii PCB?

It measures 357.2 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Fortissimo ii use?

163 parts, built around the PESD5V0S1UL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Fortissimo ii KiCad files?

From the gbtsui/fortissimo-ii repository on GitHub, at the commit this page was made from: the board is fortissimo-ii.kicad_pcb and its schematic fortissimo-ii.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Fortissimo ii design in my own project?

Its repository states no licence, so its author keeps all rights: ask gbtsui before reusing the design.