
Keyboard
jasperhax0r/CompaqPortableKeyboard
Mechanical Keyboard for the original Compaq Portable XT-Class

Second attempt at making a split ortholinear coding/multilanguage keyboard.
Fortissimo ii is an open-source printed circuit board by gbtsui, from the gbtsui/fortissimo-ii repository on GitHub. It is a 2-layer board of 357.2 × 100 mm with 163 parts on 134 nets, routed with 828 tracks and 29 vias.
It is built around the PESD5V0S1UL. Its parts include 74 diodes, 69 switches, 4 resistors and 2 connectors. It belongs with the keyboards and input boards and the RP2040 boards of this library.
Hello world!
This is my 2nd attempt at building a keyboard.
I really enjoyed hackpad v2 (even though mine ended up broken...) and I wanted an extra little challenge to build something bigger and get better at soldering. So I designed this ortholinear split keyboard that's ideally meant to be perfect for me; ergonomic design, looks cool, a lot of functionality, and on-the-fly custom language switching (eventually - firmware hasn't caught up to that yet!). Since I'm planning on phasing out my laptop when the school year starts to avoid distractions a bit better, I'm going to hopefully replace it with an iPad so I can take notes more effectively. But because I don't have enough money for an iPad keyboard (I'm not shelling out another $160 after buying a $400 device plus a $100 pencil), and I wanted to challenge myself to design something that might be able to replace it, I designed this instead.
Maybe it's not the prettiest case (blame my awful CAD skills, also it's actually asymmetrical in size) and doesn't have the most beautiful design (I'm no electrical engineer), but hopefully it'll work.
Also, yes, this keyboard is piano themed. I like pianos. I am not good at playing piano. But I thought it was a cool concept.

| Item | Cost (each) | Quantity | Subtotal | Shipping |
|---|---|---|---|---|
| kailh choc v1 brown | $0.48 (10 pack) | 70 | $33.60 | $8.45 |
| trrs jack | $0.069 (20 pack) | 2 | $1.38 | $4.35 |
| 128x64 SSD1306 OLED | $1.15 | 2 | $2.30 | Free Shipping |
| digikey | --- | --- | --- | $8.00 |
| 1N4148FS-ND matrix diodes | $0.0486 (100 pack) | 70 | $4.86 | - |
| PESD5V0S1UL ESD protection diode | $0.311 (10 pack) | 6 | $3.11 | - |
| 6mm tactile switch | $0.15 | 1 | $0.15 | - |
| raspberry pi pico | $5.75 | 1 | $5.75 | - |
| 4.7k pull up resistor | $0.014 (10 pack) | 4 | $0.14 | - |
| header pin | $1.25 | 1 | $1.25 | - |
| M3 10mm heatset insert | $0.1826 (50 pack) | 10 | $9.13 | - |
| M3 10mm screw | $0.753 (10 pack) | 10 | $7.53 | - |
| PCB | $6.69 (5 pack, including shipping) | 1 | $17.60 | $12.67 + $3.17 |
Total: $123.44
| Qty | Value | Footprint | References |
|---|---|---|---|
| 68 | D | fortissimo-ii:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +52 |
| 66 | SW_Push_45deg | fortissimo-ii:Low-Profile-Choc-MX | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +50 |
| 6 | PESD5V0S1UL | Diode_SMD:D_SOD-882 | D35, D36, D37, D72, D73, D74 |
| 4 | 4.7k | fortissimo-ii:R_0603_1608Metric | R1, R2, R3, R4 |
| 2 | AudioJack4 | fortissimo-ii:TRRS-PJ-320A | J1, J2 |
| 2 | RaspberryPi_Pico | fortissimo-ii:RaspberryPi_Pico_Common_Unspecified | A1, A2 |
| 2 | SSD1306 | fortissimo-ii:128x64OLED | Brd1, Brd2 |
| 2 | SW_Push_45deg | fortissimo-ii:MX-Alps-Choc-2U-StabFlip | SW34, SW40 |
| 1 | LANG | fortissimo-ii:SW_PUSH_6mm | SW35 |
The 153 most common of 163 parts.

jasperhax0r/CompaqPortableKeyboard
Mechanical Keyboard for the original Compaq Portable XT-Class


bdini13/esp32-cc1101-multiband
Work-in-progress ESP32-WROOM-32E + CC1101 multiband PCB: software-selected 315/433/868/915 MHz paths. AI-assisted engineering draft; not manufacturing-ready.


mrkingseasheep/PixApple
PixApple is designed as a RP2040 breakout board. It features 8 general use GPIOs, 1 SPI interface, 1 I2C interface, 4 ADC channels, 4 PWM channels and a CAN bus.

AlejandroPina/PinaBioHw
Non-medical biofeedback PCB: GSR, PPG/HRV, skin temperature, lab ECG, and two resistive breath belts on a Seeed XIAO ESP32-S3.

antonavhmx/AAM-PCB-
Este repositorio contiene el diseño de hardware y los archivos de manufactura industrial para una tarjeta de circuito impreso de 4 capas.

attahiruj/kicad-evaltor
A Python library for validating KiCad designs programmatically. Describe the properties a design is supposed to have, reference designators, values, connectivity, footprint assignment, ERC and DRC results, routing…
It measures 357.2 × 100 mm and has 2 copper layers, 1.6 mm thick.
163 parts, built around the PESD5V0S1UL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gbtsui/fortissimo-ii repository on GitHub, at the commit this page was made from: the board is fortissimo-ii.kicad_pcb and its schematic fortissimo-ii.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask gbtsui before reusing the design.