Skip to the content
2 layers100 × 54 mmMs2-card, the printed circuit board in 3D

git clone https://github.com/arendst/Tasmota.git cd Tasmota git tag pio run

Size
100 × 54 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
89
Pads
170
Tracks, vias
1, 0
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
29 Aug 2013
Updated
26 Oct 2026

Overview

Ms2-card is an open-source printed circuit board by GBert, from the GBert/railroad repository on GitHub. It is a 2-layer board of 100 × 54 mm with 26 parts on 89 nets, routed with 1 track and 0 vias.

It is built around the RP2040 and W25Q128JVSIQ. Its parts include 11 resistors, 7 connectors, 2 capacitors, 2 ICs and 1 diode. It belongs with the RP2040 boards of this library.

Main components

2

README

ms2-card/README.md

ESP8266

Tasmota Tests

git clone https://github.com/arendst/Tasmota.git cd Tasmota git tag pio run

{"NAME":"ESP-12F","GPIO":[1,1,1,1,1,1,0,0,1,1,1,1,1,1],"FLAG":0,"BASE":18}

user_config_override.h

text
// Select none or only one of the below defines USE_RULES or USE_SCRIPT
#ifdef USE_RULES 
#undef USE_RULES                                // Add support for rules (+8k code)
#endif

#ifndef USE_SCRIPT
#define USE_SCRIPT
#endif
#define SDCARD_DIR //Not essential I think
#define USE_SCRIPT_FATFS_EXT //Not essential I think
#define USE_SCRIPT_FATFS //Not essential I think
#define USE_UFILESYS
#define USE_SDCARD
#define SDCARD_CS_PIN 4 //Not strictly necessary since the same #define happens in xdrv_50_filesystem.ino

//Further down I define SPI

#define USE_SPI

Flashing

text
esptool.py --port /dev/ttyUSB1 erase_flash 
esptool.py --port /dev/ttyUSB1 --baud 460800 write_flash --flash_size=detect 0 ./build_output/firmware/tasmota.bin

Raspberry Pi I2C Slave

FunctionGPIOPin
SDAGPIO2Pin 3
SCLGPIO3Pin 5
SDA SlaveGPIO10Pin 19used
SCL SlaveGPIO11Pin 23used

PI Pico

I2C Slave

GPIOFunction
GP4SDAPIN 6
GP5SCLPIN 7

https://draeger-it.blog/maker-pi-pico-2-sensordaten-auf-einer-sd-card-speichern/

GPIOSD ModeSPI Mode
GP10CLKSCK
GP11CMDSDI / MOSI
GP12DAT0SDO / MISO
GP13DAT1X
GP14DAT2X
GP15CD/DAT3CSn

Parts

26
QtyValueFootprintReferences
64k7Resistors_SMD:R_0805_HandSolderingIIR2, R3, R4, R5, R20, R21
2100nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2
247Resistors_SMD:R_0805_HandSolderingIIR8, R9
247Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR6, R7
2Card Edgew_conn_misc:MS2_EdgeJ21, J22
1330Resistors_SMD:R_0805_HandSolderingIIR1
1Conn_01x04Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_VerticalJ23
1Conn_01x06Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ11
1JumperJumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmJP1
1LEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD1
1MicroSD_SPI_CDw_conn_misc:GCT-MEM2055-00-190-01-AJ10
1Power_OnlyConnector_USB:USB_Micro-B_Molex-105017-0001J30
1RP2040RP2040:RP2040-QFN-56U1
1SSD1306Lokkarten:128x64OLEDBrd1
1SW_Pushw_switch:PCB_PUSHSW1
1Smartcard Connectorw_conn_misc:iso7816_connJ20
1W25Q128JVSPackage_SO:SOIC-8_5.23x5.23mm_P1.27mmU2

More from GBert/railroad

2
  • 2 layers70 × 50 mmS88iso, the printed circuit board in 3D

    S88iso

    GBert/railroad

    git clone https://github.com/arendst/Tasmota.git cd Tasmota git tag pio run

    33 parts36
  • 2 layersC8051-test, the printed circuit board in 3D

    C8051-test

    GBert/railroad

    git clone https://github.com/arendst/Tasmota.git cd Tasmota git tag pio run

    13 parts36

Similar boards

  • 2 layers42 × 67 mmLalboard, the printed circuit board in 3D

    Lalboard

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    65 parts993
  • 2 layers181 × 97 mmOpenDeck r3.1.2, the printed circuit board in 3D

    OpenDeck r3.1.2

    shanteacontrols/OpenDeck

    A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

    262 parts960Apache-2.0
  • 4 layers82.6 × 82.5 mmJumperless2, the printed circuit board in 3D

    Jumperless2

    Architeuthis-Flux/Jumperless

    A jumperless breadboard

    208 parts914
  • 4 layers102.9 × 96.7 mmPicoGUS chipdown, the printed circuit board in 3D

    PicoGUS chipdown

    polpo/picogus

    Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support

    99 parts805
  • 4 layers180.8 × 300.3 mmDilemma, the printed circuit board in 3D

    Dilemma

    Bastardkb/Dilemma

    The Dilemma is a vertical stagger low-profile keyboard with mods.

    383 parts590
  • 2 layers130.4 × 76.6 mmGb stream cart, the printed circuit board in 3D

    Gb stream cart

    Staacks/gbinterceptor

    Capture or stream Game Boy gameplay footage via USB without modifying the Game Boy.

    80 parts542
  • 2 layers78 × 60 mmIce viz, the printed circuit board in 3D

    Ice viz

    muni-works/vcad

    BRep CAD kernel in Rust/WASM

    44 parts442Apache-2.0
  • 2 layers44 × 44 mmTrackball, the printed circuit board in 3D

    Trackball

    jfedor2/rp2040-pmw3360

    RP2040+PMW3360 PCB and code

    40 parts432

Questions

How big is the Ms2-card PCB?

It measures 100 × 54 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ms2-card use?

26 parts, built around the RP2040 and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ms2-card KiCad files?

From the GBert/railroad repository on GitHub, at the commit this page was made from: the board is ms2-card/ms2-card.kicad_pcb and its schematic ms2-card-esp8266/ms2-card.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ms2-card design in my own project?

Its repository states no licence, so its author keeps all rights: ask GBert before reusing the design.