
S88iso
GBert/railroad
git clone https://github.com/arendst/Tasmota.git cd Tasmota git tag pio run

git clone https://github.com/arendst/Tasmota.git cd Tasmota git tag pio run
C8051-test is an open-source printed circuit board by GBert, from the GBert/railroad repository on GitHub. It is a 2-layer board with 13 parts on 127 nets, routed with 154 tracks and 4 vias.
It is built around the C8051F502-IM, MCP2561-E/P and MCP2562-H/P. Its parts include 6 resistors, 5 ICs and 2 connectors.
git clone https://github.com/arendst/Tasmota.git cd Tasmota git tag pio run
{"NAME":"ESP-12F","GPIO":[1,1,1,1,1,1,0,0,1,1,1,1,1,1],"FLAG":0,"BASE":18}
user_config_override.h
// Select none or only one of the below defines USE_RULES or USE_SCRIPT
#ifdef USE_RULES
#undef USE_RULES // Add support for rules (+8k code)
#endif
#ifndef USE_SCRIPT
#define USE_SCRIPT
#endif
#define SDCARD_DIR //Not essential I think
#define USE_SCRIPT_FATFS_EXT //Not essential I think
#define USE_SCRIPT_FATFS //Not essential I think
#define USE_UFILESYS
#define USE_SDCARD
#define SDCARD_CS_PIN 4 //Not strictly necessary since the same #define happens in xdrv_50_filesystem.ino
//Further down I define SPI
#define USE_SPIesptool.py --port /dev/ttyUSB1 erase_flash
esptool.py --port /dev/ttyUSB1 --baud 460800 write_flash --flash_size=detect 0 ./build_output/firmware/tasmota.bin| Function | GPIO | Pin | |
|---|---|---|---|
| SDA | GPIO2 | Pin 3 | |
| SCL | GPIO3 | Pin 5 | |
| SDA Slave | GPIO10 | Pin 19 | used |
| SCL Slave | GPIO11 | Pin 23 | used |
I2C Slave
| GPIO | Function | |
|---|---|---|
| GP4 | SDA | PIN 6 |
| GP5 | SCL | PIN 7 |
https://draeger-it.blog/maker-pi-pico-2-sensordaten-auf-einer-sd-card-speichern/
| GPIO | SD Mode | SPI Mode |
|---|---|---|
| GP10 | CLK | SCK |
| GP11 | CMD | SDI / MOSI |
| GP12 | DAT0 | SDO / MISO |
| GP13 | DAT1 | X |
| GP14 | DAT2 | X |
| GP15 | CD/DAT3 | CSn |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1K | Resistors_SMD:R_0805 | R1, R2 |
| 2 | CONN_02X23 | Pin_Headers:Pin_Header_Straight_2x23 | P8, P9 |
| 1 | 1K5 | Resistors_SMD:R_0805 | R7 |
| 1 | 22 | Resistors_SMD:R_0805 | R4 |
| 1 | 4,7k | Resistors_SMD:R_0805 | R6 |
| 1 | 4K7 | Resistors_SMD:R_0805 | R3 |
| 1 | C8051F502 | Housings_DIP:DIP-32_W15.24mm | U1 |
| 1 | LSI2C | Housings_DIP:DIP-8_W_ELL | U4 |
| 1 | MCP2561 | Housings_DIP:DIP-8_W7.62mm | U3 |
| 1 | MCP2562 | Housings_DIP:DIP-8_W7.62mm | U2 |
| 1 | TXB0104_16 | Housings_DIP:DIP-16_W_ELL | U5 |



xerootg/CAN-CCD_bus
Implements a CAN translator to CCD via a Intersil CDP68HC68S1

DashSight/Pine64-Mezzanine-Card
A PineA64 mezzanine card for adding support to communicate with a vehicle's OBD2 port, obtain GPS location and determine acceleration, designed in KiCAD

kevinkrieger/CAN
CAN repository containing my CAN project, kicad files, firmware, datasheets, references, etc.


Gonke0606/Personal_production_circuit
This repository is for my personal production of circuit.

13 parts, built around the C8051F502-IM, MCP2561-E/P and MCP2562-H/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the GBert/railroad repository on GitHub, at the commit this page was made from: the board is c8051-test/c8051-test.kicad_pcb and its schematic ms2-card-esp8266/ms2-card.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask GBert before reusing the design.