
Electronic hangboard v3-panelized
lyuboasenov/MxA
MxA is a portable BLE-enabled strain gauge that can be used for weight-free training as well as testing/assessment.

Test bench is an open-source printed circuit board by gaurav-sonawane4, from the gaurav-sonawane4/PCB_Design_works repository on GitHub, published under the MIT licence. It is a 2-layer board of 80 × 140.5 mm with 46 parts on 78 nets, routed with 332 tracks and 14 vias.
It is built around the ESP32-WROOM-32, HX711 and LM2596S-5.0, with the AMS1117-3.3 among its other parts. Its parts include 15 capacitors, 12 resistors, 7 ICs, 7 connectors and 2 diodes. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C8, C10, C11, C12, C13, C14, C15 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R6 |
| 3 | 10uF | Capacitor_SMD:C_1206_3216Metric | C6, C7, C9 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric | R9, R10 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric | R11, R12 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1, SW2 |
| 1 | 0.1uF | Capacitor_SMD:C_1206_3216Metric | C5 |
| 1 | 0.1uF 100V | Capacitor_SMD:C_1206_3216Metric | C2 |
| 1 | 100K | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 100uF 100V | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 15k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 1N5822 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D2 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 220uF 16v | Capacitor_THT:C_Radial_D10.0mm_H12.5mm_P5.00mm | C4 |
| 1 | 220uF 35v | Capacitor_THT:C_Radial_D10.0mm_H12.5mm_P5.00mm | C3 |
| 1 | 33uH | Inductor_SMD:L_10.4x10.4_H4.8 | L1 |
| 1 | 400ohm | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | ACS758xCB-100B-PFF | Sensor_Current:Allegro_CB_PFF | U1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | CP2102N-Axx-xQFN20 | Package_DFN_QFN:SiliconLabs_QFN-20-1EP_3x3mm_P0.5mm_EP1.8x1.8mm | U5 |
| 1 | Conn_01x02 | Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_Vertical | J1 |
| 1 | Conn_01x02 | Connector_AMASS:AMASS_XT60-M_1x02_P7.20mm_Vertical | J2 |
| 1 | D_TVS | Diode_SMD:D_SMB | D1 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U4 |
| 1 | HX711 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U6 |
| 1 | J_DISPLAY | Connector:FanPinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | J_LOAD | Connector_JST:JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J4 |
| 1 | J_RPM | Connector:FanPinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | J_TEMP | Connector:FanPinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | LM2596S-5 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U2 |
| 1 | MAX31865xAP | Package_SO:SSOP-20_5.3x7.2mm_P0.65mm | U7 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-AB_Molex_47590-0001 | J3 |

lyuboasenov/MxA
MxA is a portable BLE-enabled strain gauge that can be used for weight-free training as well as testing/assessment.

dquang05/system_desgin_project
Academic project - AGV: line following robot


Mritunjay5511/ESP32-Multi-Motor-Controller-Board-
Custom ESP32-WROOM-32 robotics controller PCB with onboard buck/LDO power regulation, auto-program circuit, and BTS7960/RMCS/relay/servo interfaces. Designed in KiCad.

anadskman/Water-Dispenser
A water dispenser that can dispense water mixed with flavouring like blackcurrent

Ontos-2021/esp32-clima
Estación meteorológica local con ESP32-WROOM-32, BMP180 y DHT22.

practable/iso-power-pcb
Remote power control board for ISO experiment containers, used for remote labs projects

vyrubaev/TV-Lift-Controller
TVLift Controller is an intelligent controller for TV lift and lower mechanisms, based on the ESP32 microcontroller.
It measures 80 × 140.5 mm and has 2 copper layers, 1.67 mm thick.
46 parts, built around the ESP32-WROOM-32, HX711, LM2596S-5.0 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gaurav-sonawane4/PCB_Design_works repository on GitHub, at the commit this page was made from: the board is ESP32-Motor-Thrust-Measurement-System/Test_bench/Test_bench.kicad_pcb and its schematic ESP32-Motor-Thrust-Measurement-System/Test_bench/Test_bench.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).