

📥 Nhấn vào link bên dưới để xem sơ đồ nguyên lý:
- Size
- 40 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 103
- Pads
- 268
- Tracks, vias
- 373, 83
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 31 Mar 2026
- Updated
- 9 Apr 2026
Overview
Nhat is an open-source printed circuit board by tue-minh, from the tue-minh/PCB_Nhat repository on GitHub. It is a 2-layer board of 40 × 60 mm with 58 parts on 103 nets, routed with 373 tracks and 83 vias.
It is built around the CH340C, ESP32-WROOM-32 and HX711, with the AMS1117-3.3, MPU-6050 and SS8050 among its other parts. Its parts include 22 resistors, 18 capacitors, 6 ICs, 4 transistors and 3 connectors. It belongs with the ESP32 boards of this library.
Main components
7CH340C
SOP-16-20℃~+70℃ 2Mbps 3.3V、5V 50uA 7mA Transceiver USB 2.0 SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesHX711
SOP-16-40℃~+85℃ 1.4mA 10Hz、80Hz 1MHz~20MHz、11.0592MHz 2 2.6V~5.5V 20mV、40mV、80mV 24 Built-in External、Built-in SPI Support Yes SOP-16 Analog to Digital Converters (ADC) ROHSAvia SemiconAnalog To Digital Converters (ADC)AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMPU-6050
QFN-24-EP(4x4)-40℃~+85℃ 16bit 1KB 2.375V~3.46V 5uA Accelerometer Gyroscope I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(4x4) Accelerometers ROHSTDK InvenSenseAccelerometersSS8050
SOT-323-55℃~+150℃ 1 NPN 1.5A 100MHz 100nA 200 25V 300mW 500mV 5V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)SS8550
SOT-23-55℃~+150℃ 1 PNP 1.5A 100MHz 100nA 120 25V 300mW 500mV 5V PNP SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
README
README.md📘 PCB Review
🖼️ PCB Images
🔵 Front View
🔴 Back View
🟢 Routing View
📄 Schematic
📥 Nhấn vào link bên dưới để xem sơ đồ nguyên lý:
📝 Notes
- Kích thước mạch: 60 x 40 (mm)
- Khoảng cách lỗ: 54 x 34 (mm)
- Pinout:
| ESP32 | HX711 | MPU6050 |
|---|---|---|
| GPIO19 | DOUT1 | |
| GPIO18 | SCK1 | |
| GPIO16 | DOUT2 | |
| GPIO17 | SCK2 | |
| GPIO21 | SDA | |
| GPIO22 | SCL |
✅ BOM
- SOC - ESP WROOM 32 (x1)
- IC - HX711 IC (x2)
- IC - CH340C (x1)
- IC - MPU6050 (x1)
- LDO - AMS1117 3V3 (x1)
- Transistor - SS8050 NPN (x2)
- Transistor - SS8550 PNP (x2)
- Button SMD - 3x6x2.5 (mm) (x2)
- Connector - TypeC 16P USB2.0 (x1)
- Connector - Terminal block 5.08 mm - 4 Pin (x2)
- Capacitor Tantalum - 3216 (Check schematic)
- Capacitor SMD - 0603 (Check schematic)
- Resistor SMD - 0603 (Check schematic)
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100nf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C5, C6, C8, C9, C11, C12, C13, C14, C16, C17 |
| 4 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R23, R24, R27, R28 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R14, R15, R22 |
| 4 | 220 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20, R21, R33, R34 |
| 3 | 10uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C10, C18 |
| 3 | LED | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | PW1, RX1, TX1 |
| 2 | 10uf | Capacitor_Tantalum_SMD:CP_EIA-3216-12_Kemet-S_HandSolder | C2, C4 |
| 2 | 20-22R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16, R17 |
| 2 | 20k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R25, R29 |
| 2 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R31, R32 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18, R19 |
| 2 | 8k2 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R26, R30 |
| 2 | Conn_01x04 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | J2, J3 |
| 2 | HX711 | Package_SO:SOP-16_3.9x9.9mm_P1.27mm | U2, U3 |
| 2 | SS8050 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | SS8550 | Package_TO_SOT_SMD:SOT-23 | Q5, Q6 |
| 2 | SW_Push | tue_sw_smd_3x6x2.5:tue_sw_smd_3x6x2.5mm | BOOT1, EN1 |
| 1 | 10nf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 220pf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C15 |
| 1 | AMS1117-3.3 | tue_ams1117:SOT_AMS_ADS | U7 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U5 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U1 |
| 1 | MPU-6050 | tue_mpu6050:QFN50P400X400X95-24N | U4 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
Similar boards
- 2 layers50 × 50 mm

- 2 layers100 × 90 mm

System desgin project
dquang05/system_desgin_project
Academic project - AGV: line following robot
78 parts - 2 layers86 × 65 mm

- 2 layers52 × 29 mm

Esp32 wroom mudule
moksh-pcb-design/ESP32-WROOM-Development-Board
Custom ESP32-WROOM-32 Development Board designed in KiCad 10 featuring USB Type-C, CH340C USB-UART interface, AMS1117 power regulation and auto-programming circuitry.
26 parts2 - 2 layers52 × 29 mm

Esp32 wroom
7205jmj/Custom-ESP32-WROOM-32-Development-Board
Most ESP32 development boards available in the market include additional features that may not be required for every project.
26 parts1 - 2 layers52.1 × 29 mm

- 2 layers52 × 30 mm

- 2 layers50 × 35 mm

Esp32 board
Adichidrawar/electronics-assessment-IF
Hardware design solution for the Intelligence Factory Hardware/Mechatronics Engineer take-home assessment. Includes a two-board ESP32-based embedded system with a remote IMU sensor board, complete PCB design in KiCad…
27 parts
Questions
How big is the Nhat PCB?
It measures 40 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Nhat use?
58 parts, built around the CH340C, ESP32-WROOM-32, HX711 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nhat KiCad files?
From the tue-minh/PCB_Nhat repository on GitHub, at the commit this page was made from: the board is hardware/ws/Nhat.kicad_pcb and its schematic hardware/ws/Nhat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nhat design in my own project?
Its repository states no licence, so its author keeps all rights: ask tue-minh before reusing the design.