2 layers333.4 × 149.9 mm
2 layers50.8 × 99.1 mm
POV Bike
garoa/POV-Bike1Hardware e Software para mostrar imagens simples na roda de uma bicicleta aproveitando a persistência da visão.
- Size
- 50.8 × 99.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 23
- Pads
- 65
- Tracks, vias
- 117, 0
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 3 Feb 2015
- Updated
- 6 Feb 2015
Overview
POV Bike is an open-source printed circuit board by garoa, from the garoa/POV-Bike repository on GitHub, published under the MIT licence. It is a 2-layer board of 50.8 × 99.1 mm with 24 parts on 23 nets, routed with 117 tracks and 0 vias.
It is built around the CR2032. Its parts include 10 resistors, 9 diodes, 2 ICs and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 220R | R3 | R3, R4, R5, R6, R7, R8, R9, R10 |
| 8 | LED | LED-5MM | D2, D3, D4, D5, D6, D7, D8, D9 |
| 1 | 10K | R3 | R2 |
| 1 | 1K | R3 | R1 |
| 1 | A1120 | SIL-3 | U1 |
| 1 | ATTINY44-P | DIP-14__300 | IC1 |
| 1 | CONN_6 | SIL-6 | P1 |
| 1 | CR2032 | CR2032H | BT1 |
| 1 | JUMPER | SIL-2 | JP1 |
| 1 | LED | LED-3MM | D1 |
Similar boards
- 2 layers17.2 × 30.4 mm
- 4 layers188 × 188 mm
- 2 layers61 × 36.8 mm
- 2 layers59.2 × 41 mm
- 2 layers35 × 35 mm
- 2 layers90 × 89.4 mm
- 2 layers170.2 × 100 mm
Z80-SBC
skiselev/zeta_sbc
Zeta SBC is an Zilog Z80 based single board computer. It is inspired by Ampro Little Board Z80 and N8VEM project. Zeta SBC is software compatible with RomWBW Firmware
75 parts53GPL-3.0
Questions
How big is the POV Bike PCB?
It measures 50.8 × 99.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the POV Bike use?
24 parts, built around the CR2032. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the POV Bike KiCad files?
From the garoa/POV-Bike repository on GitHub, at the commit this page was made from: the board is POV_Bike.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the POV Bike design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).