Skip to the content
4 layers33 × 22.9 mmRS485, the printed circuit board in 3D

eVOLVER Hardware (PCB, 3D printed parts)

Size
33 × 22.9 mm
Copper layers
4
Thickness
1.6 mm
Parts
18
Nets
17
Pads
76
Tracks, vias
188, 46
Pours
3
Routed
Yes
KiCad
KiCad 4
Created
1 Jun 2019
Updated
3 Nov 2026

Overview

RS485 is an open-source printed circuit board by FYNCH-BIO, from the FYNCH-BIO/hardware repository on GitHub. It is a 4-layer board of 33 × 22.9 mm with 18 parts on 17 nets, routed with 188 tracks and 46 vias.

It is built around the SP3485CN-L and TLV1117LV33DCYR. Its parts include 7 capacitors, 5 ICs, 4 resistors and 2 connectors. It belongs with the interfaces and adapters boards of this library.

Main components

2

README

README.md

eVOLVER Hardware Components/CAD

This repository contains all hardware CAD files for the eVOLVER continuous culture platform.

For more information on the platform, check out our Nature Biotech publication.

For information on building, troubleshooting, and running experiments on the platform, reach out to us on the eVOLVER forum and read the wiki.

Software Repositories:

Parts

18
QtyValueFootprintReferences
5Cmods:C_0402C3, C4, C5, C6, C7
410kmods:R_0402R1, R2, R3, R4
4SP3485CNmods:SO-8U1, U2, U4, U5
2.1uFmods:C_0402C1, C2
2CONN_01X09mods:9_pin_10inP1, P2
1TLV1117LV33DCYRmods:TLV1117LV33DCYRU3

More from FYNCH-BIO/hardware

12
  • 4 layers320 × 378.2 mmMotherboard, the printed circuit board in 3D

    Motherboard

    FYNCH-BIO/hardware

    eVOLVER Hardware (PCB, 3D printed parts)

    167 parts12
  • 4 layers33 × 66 mmADC, the printed circuit board in 3D

    ADC

    FYNCH-BIO/hardware

    eVOLVER Hardware (PCB, 3D printed parts)

    98 parts12
  • 4 layers120.6 × 115.3 mmFlow rate, the printed circuit board in 3D

    Flow rate

    FYNCH-BIO/hardware

    eVOLVER Hardware (PCB, 3D printed parts)

    87 parts12
  • 4 layers109.2 × 64.5 mmMin evolver, the printed circuit board in 3D

    Min evolver

    FYNCH-BIO/hardware

    eVOLVER Hardware (PCB, 3D printed parts)

    72 parts12
  • 4 layers33 × 66 mmEVolver pwm, the printed circuit board in 3D

    EVolver pwm

    FYNCH-BIO/hardware

    eVOLVER Hardware (PCB, 3D printed parts)

    66 parts12
  • 4 layers203.2 × 101.6 mmPressure module, the printed circuit board in 3D

    Pressure module

    FYNCH-BIO/hardware

    eVOLVER Hardware (PCB, 3D printed parts)

    39 parts12
  • 4 layers266.7 × 123.2 mmAuxiliary Board, the printed circuit board in 3D

    Auxiliary Board

    FYNCH-BIO/hardware

    eVOLVER Hardware (PCB, 3D printed parts)

    36 parts12
  • 2 layers92.7 × 82.6 mmTemperature board, the printed circuit board in 3D

    Temperature board

    FYNCH-BIO/hardware

    eVOLVER Hardware (PCB, 3D printed parts)

    32 parts12
  • 2 layers65 × 56 mmPi Hat, the printed circuit board in 3D

    Pi Hat

    FYNCH-BIO/hardware

    eVOLVER Hardware (PCB, 3D printed parts)

    28 parts12
  • 2 layers49.5 × 58.4 mmVial Board, the printed circuit board in 3D

    Vial Board

    FYNCH-BIO/hardware

    eVOLVER Hardware (PCB, 3D printed parts)

    18 parts12
  • 2 layers49.5 × 58.4 mmVial Board, the printed circuit board in 3D

    Vial Board

    FYNCH-BIO/hardware

    eVOLVER Hardware (PCB, 3D printed parts)

    17 parts12
  • 2 layers109.2 × 139.7 mmPump board, the printed circuit board in 3D

    Pump board

    FYNCH-BIO/hardware

    eVOLVER Hardware (PCB, 3D printed parts)

    11 parts12

Similar boards

  • 2 layers33.3 × 6.3 mmStm8s001rs485, the printed circuit board in 3D

    Stm8s001rs485

    TG9541/stm8s001rs485

    A narrow KiCad made PCB with STM8S001J3, RS485 driver and DS1621S Thermometer, e.g., for STM8EF-MODBUS

    21 parts20MIT
  • 2 layers16.9 × 14.4 mmRs485-ch340e, the printed circuit board in 3D

    Rs485-ch340e

    TG9541/rs485-ch340e

    A small CH340E based configurable RS485 or TTL 2/3-wire USB dongle

    17 parts15MIT
  • 4 layers40 × 40 mmEnc encoder, the printed circuit board in 3D

    Enc encoder

    ROAR-QUTRC/perseus-v3

    The code base for the QUT Robotics Club ROAR teams rover Perseus starting 2026

    87 parts10
  • 2 layers94 × 94 mm3axis magnitometer, the printed circuit board in 3D

    3axis magnitometer

    NarodniySputnik/Gladiolus-1

    Gladiolus-1 - автономный модуль для приема и передачи изображений в формате SSTV (Slow Scan TeleVision) на малом космическом аппарате (МКА) формата CubeSat

    96 parts9GPL-3.0
  • 2 layers39.7 × 28.7 mmFordacp, the printed circuit board in 3D

    Fordacp

    tomaskovacik/fordacp

    HW for Dale Thomas fordcap CD changer emualtor

    36 parts8
  • 2 layers80 × 100 mmUltimate temp controller, the printed circuit board in 3D

    Ultimate temp controller

    Technariumas/ultimate-temperature-controller

    Thermocouple based kiln/oven temperature controller accessable via RS485 or LCD/keypad. Supports temperature profiles on a SD card.

    76 parts4Apache-2.0
  • 2 layers88.3 × 105 mmDMX ESP Stepper controller, the printed circuit board in 3D

    DMX ESP Stepper controller

    electron-rare/DMX_ESP_Stepper-controller

    contrôle de moteur pas à pas selon commande DMX, pour l'opéra de Montpellier

    47 parts3GPL-3.0
  • 4 layers97 × 97.4 mmQEdge UI, the printed circuit board in 3D

    QEdge UI

    qinno/qEdge-UI

    qedge+ is the industry's low power design alternative to the standard PC approach. qEdge-UI is part of qEdge+ and consists of a RaspBerry Pico with LCD, touch screen and keys and an 868MHz LoRa radio module.

    170 parts3

Questions

How big is the RS485 PCB?

It measures 33 × 22.9 mm and has 4 copper layers, 1.6 mm thick.

What parts does the RS485 use?

18 parts, built around the SP3485CN-L and TLV1117LV33DCYR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RS485 KiCad files?

From the FYNCH-BIO/hardware repository on GitHub, at the commit this page was made from: the board is Vial Platform/RS485/RS485.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the RS485 design in my own project?

Its repository states no licence, so its author keeps all rights: ask FYNCH-BIO before reusing the design.