

Fordacp
HW for Dale Thomas fordcap CD changer emualtor
- Size
- 39.7 × 28.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 42
- Pads
- 242
- Tracks, vias
- 536, 37
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 14 Oct 2015
- Updated
- 5 Jun 2018
Overview
Fordacp is an open-source printed circuit board by tomaskovacik, from the tomaskovacik/fordacp repository on GitHub. It is a 2-layer board of 39.7 × 28.7 mm with 36 parts on 42 nets, routed with 536 tracks and 37 vias.
It is built around the SP3485CN-L. Its parts include 13 capacitors, 9 resistors, 5 ICs, 3 diodes and 2 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdSW is Dale Thomas/Krzysztof Pintscher/Andrew Hammond work not my
www.instructables.com/id/Ford-CD-Emulator-Arduino-Mega/ http://www.instructables.com/id/Ford-Bluetooth-Interface-Control-phone-with-stock-/
I make just HW part in kicad, libraries for BLK-MD-SPK-B and S3860M-S here
work in progress
untested
BLK-MD-SPK-B module support. S3860M-S module support.
schematics
3d render
with LCD
without LCD

Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n/50V | Capacitors_SMD:C_0805_HandSoldering | C2, C5, C6, C7, C8, C9 |
| 2 | 10k | Resistors_SMD:R_0805_HandSoldering | R8, R9 |
| 2 | 1u/16V | Capacitors_SMD:C_0805_HandSoldering | C10, C11 |
| 2 | 22 | Capacitors_SMD:C_0805_HandSoldering | C12, C13 |
| 2 | 470 | Resistors_SMD:R_0805_HandSoldering | R4, R5 |
| 1 | 15nH | Choke_SMD:Choke_SMD_1206_Standard | L1 |
| 1 | 16MHz | Crystals_Oscillators_SMD:Q_49U3HMS | Y1 |
| 1 | 1M | Resistors_SMD:R_0805_HandSoldering | R2 |
| 1 | 1uf/10V | Capacitors_SMD:C_0805_HandSoldering | C3 |
| 1 | 27R | Resistors_SMD:R_0805_HandSoldering | R3 |
| 1 | 2k7(3k3) | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | 47u/25V | Capacitors_Tantalum_SMD:TantalC_SizeD_EIA-7343_HandSoldering | C1 |
| 1 | 4k7 | Resistors_SMD:R_0805_HandSoldering | R7 |
| 1 | 4u7/10V | Capacitors_SMD:C_1206_HandSoldering | C4 |
| 1 | 5V1 | Diodes_SMD:MiniMELF_Standard | D3 |
| 1 | 6k8 | Resistors_SMD:R_0805_HandSoldering | R6 |
| 1 | AP1117D50 | my_modules:SOT-223-REGULATOR | U2 |
| 1 | ATMEGA2560-A | Housings_QFP:TQFP-100_14x14mm_Pitch0.5mm | IC1 |
| 1 | BLK-MD-SPK-B | my_modules:BLK-MD-SPK-B | U3 |
| 1 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | MIC1 |
| 1 | CONN_01X05 | Pin_Headers:Pin_Header_Straight_1x05 | programing1 |
| 1 | CONN_02X03 | Pin_Headers:Pin_Header_Straight_2x03 | P2 |
| 1 | CONN_02X06 | Pin_Headers:Pin_Header_Straight_2x06 | P1 |
| 1 | GREEN | LEDs:LED-1206 | D1 |
| 1 | RED | LEDs:LED-1206 | D2 |
| 1 | SP3485CN | SO-8 | U1 |
| 1 | XS3860 | my_modules:S3860M-S | U4 |
More from tomaskovacik/fordacp
1- 2 layers81.9 × 42.4 mm

Similar boards
- 2 layers33.3 × 6.3 mm

Stm8s001rs485
TG9541/stm8s001rs485
A narrow KiCad made PCB with STM8S001J3, RS485 driver and DS1621S Thermometer, e.g., for STM8EF-MODBUS
21 parts20MIT - 2 layers16.9 × 14.4 mm

Rs485-ch340e
TG9541/rs485-ch340e
A small CH340E based configurable RS485 or TTL 2/3-wire USB dongle
17 parts15MIT - 4 layers40 × 40 mm

Enc encoder
ROAR-QUTRC/perseus-v3
The code base for the QUT Robotics Club ROAR teams rover Perseus starting 2026
87 parts10 - 2 layers94 × 94 mm

3axis magnitometer
NarodniySputnik/Gladiolus-1
Gladiolus-1 - автономный модуль для приема и передачи изображений в формате SSTV (Slow Scan TeleVision) на малом космическом аппарате (МКА) формата CubeSat
96 parts9GPL-3.0 - 2 layers80 × 100 mm

Ultimate temp controller
Technariumas/ultimate-temperature-controller
Thermocouple based kiln/oven temperature controller accessable via RS485 or LCD/keypad. Supports temperature profiles on a SD card.
76 parts4Apache-2.0 - 2 layers88.3 × 105 mm

DMX ESP Stepper controller
electron-rare/DMX_ESP_Stepper-controller
contrôle de moteur pas à pas selon commande DMX, pour l'opéra de Montpellier
47 parts3GPL-3.0 - 4 layers97 × 97.4 mm

QEdge UI
qinno/qEdge-UI
qedge+ is the industry's low power design alternative to the standard PC approach. qEdge-UI is part of qEdge+ and consists of a RaspBerry Pico with LCD, touch screen and keys and an 868MHz LoRa radio module.
170 parts3 - 2 layers

Questions
How big is the Fordacp PCB?
It measures 39.7 × 28.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Fordacp use?
36 parts, built around the SP3485CN-L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fordacp KiCad files?
From the tomaskovacik/fordacp repository on GitHub, at the commit this page was made from: the board is hw/fordacp.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fordacp design in my own project?
Its repository states no licence, so its author keeps all rights: ask tomaskovacik before reusing the design.