
OpAmp Solar Tracker
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 14
- Pads
- 58
- Tracks, vias
- 63, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 May 2025
- Updated
- 8 Jun 2025
Overview
OpAmp Solar Tracker is an open-source printed circuit board by furpectfox, from the furpectfox/Circuits repository on GitHub. It is a 2-layer board with 23 parts on 14 nets, routed with 63 tracks and 0 vias.
It is built around the LM358, 2N2222A and 2N2907A. Its parts include 6 resistors, 6 diodes, 4 transistors, 1 IC and 1 connector. It belongs with the power boards of this library.
Main components
3LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational Amplifier2N2222A
TO-92-55℃~+150℃ 1 NPN 100MHz 100nA 400 40V 5V 600mA 600mV 625mW NPN TO-92 Bipolar (BJT) ROHSSlkorBipolar (BJT)2N2907A
TO-921 PNP 1.6V 100 100nA 200MHz 5V 600mA 60V 625mW PNP TO-92 Bipolar (BJT) ROHSFoshan Blue Rocket ElecBipolar (BJT)
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1n4007 | Diode_THT:D_A-405_P7.62mm_Horizontal | D1, D3, D4, D5 |
| 2 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R8 |
| 2 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R6 |
| 2 | 2n2222a | Package_TO_SOT_THT:TO-92L_Inline_Wide | Q1, Q3 |
| 2 | 2n2907a | Package_TO_SOT_THT:TO-92L_Inline_Wide | Q2, Q4 |
| 2 | LDR07 | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | LDR1, LDR2 |
| 2 | LED | LED_THT:LED_D5.0mm | D2, D6 |
| 1 | 12K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 200K | User_Library:BOJACK_Potentiometer | RV1 |
| 1 | 20K | User_Library:BOJACK_Potentiometer | RV2 |
| 1 | 56K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | LM358 | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | Motor_DC | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | M1 |
More from furpectfox/Circuits
4- 2 layers70 × 35 mm

- 2 layers50 × 32 mm

- 2 layers70 × 64 mm

- 2 layers

Similar boards
- 2 layers89.3 × 50 mm

MM58167-ISA RTC
jensma-de/MM58167-ISA-RTC
RTC module for the ISA slot. With schematics, project files in kicad and open source software to drive the clock.
29 parts9 - 2 layers97.6 × 76.8 mm

- 2 layers

WiFi VirtDisk WemosD1mini
welzel-online/WiFi-VirtDisk
The WiFi-VirtDisk is a network-based storage solution that replaces or supplements the classic SD card approach. The hardware consists of an ESP8266 (D1 mini), which is connected to the SPI port (SD card).
14 parts5GPL-2.0 - 2 layers59.7 × 62.2 mm

IBolit ngo kicad
MCMarcusAntony/iBOLIT-1.5
Tools added to this board are: - Logic probe included on Top three pin connector. - Lighting and acoustic signals to identify HIGH and LOW status.
38 parts2 - 2 layers100 × 100 mm

Mod2Arinc
morris6/Modulo-Two_ARINC-429_Converter
Converting a Modulo-Two Serial Stream to Arinc-429 Serial Words
105 parts1 - 2 layers30 × 13 mm

Discrete Opamp
electricalhog/Discrete_Opamp
Off-the-shelve based FET input opamp designed in ECE5204 and brought to PCB
28 parts - 2 layers77.6 × 78.1 mm

SCRController
UAA-F14/PCBs-Design
Power electronics PCB coursework — SCR controller, buck converter, Class D amplifier, DC-AC inverter, and a protected power supply Resources
43 parts1 - 2 layers72.9 × 57.2 mm

Uc3525
daeln-fln-ifsc/uc3525
Repositório referente ao projeto do uc3525 para uso em sala de aula
28 partsMIT
Questions
What parts does the OpAmp Solar Tracker use?
23 parts, built around the LM358, 2N2222A and 2N2907A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the OpAmp Solar Tracker KiCad files?
From the furpectfox/Circuits repository on GitHub, at the commit this page was made from: the board is OpAmp_Solar_Tracker/OpAmp_Solar_Tracker.kicad_pcb and its schematic 3v7cell_full_charge_detection/3v7cell_full_charge_detection.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the OpAmp Solar Tracker design in my own project?
Its repository states no licence, so its author keeps all rights: ask furpectfox before reusing the design.