2 layers304.3 × 274 mm
Robotont electronics mainboard
robotont/robotont-electronics-mainboard
Unified pcb design for the 3rd generation robotont robot.
426 parts1
2 layers100 × 15 mm
Universal lights
FumBlau/universal_lightsPCB and firmware for RGB and single color control based on attiny88
- Size
- 100 × 15 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 28
- Pads
- 105
- Tracks, vias
- 263, 26
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 14 Sep 2017
- Updated
- 29 May 2018
Overview
Universal lights is an open-source printed circuit board by FumBlau, from the FumBlau/universal_lights repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 15 mm with 27 parts on 28 nets, routed with 263 tracks and 26 vias.
It is built around the ATTINY88-AU and WS2812B. Its parts include 10 diodes, 7 resistors, 5 connectors, 1 capacitor and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2README
README.mduniversal_lights
PCB and firmware for RGB and single color control based on attiny88
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | SMD-LED-CLEAR-BLUE_0603_ | SeeedOPL-LED-2016:LED-0603 | D1, D2, D3, D4, D5 |
| 5 | SMD-RES-220R-5%-1_10W_0603_ | SeeedOPL-Resistor-2016:R0603 | R1, R2, R3, R4, R6 |
| 5 | WS2812B | WS2812B:WS2812B | LED1, LED2, LED3, LED4, LED5 |
| 1 | 10K | SeeedOPL-Resistor-2016:R0603 | R5 |
| 1 | 1K | SeeedOPL-Resistor-2016:R0603 | R9 |
| 1 | 2.2UF 0603 | SeeedOPL-Capacitor-2016:C0603 | C1 |
| 1 | ATTINY88-AU | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | U1 |
| 1 | Conn_01x02 | SeeedOPL-Connector-2016:H2-2.54 | J5 |
| 1 | Conn_01x08 | SeeedOPL-Connector-2016:H8-2.54 | J4 |
| 1 | DIP-BLACK-MALE-HEADER_2X3P-2.54) | SeeedOPL-Connector-2016:H2X3-2.54 | J3 |
| 1 | NPN | SeeedOPL-Transistor-2016:SOT-23 | Q1 |
| 1 | entrada | SeeedOPL-Connector-2016:H3-2.54 | J1 |
| 1 | salida | SeeedOPL-Connector-2016:H3-2.54 | J2 |
The 25 most common of 27 parts.
Questions
How big is the Universal lights PCB?
It measures 100 × 15 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Universal lights use?
27 parts, built around the ATTINY88-AU and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Universal lights KiCad files?
From the FumBlau/universal_lights repository on GitHub, at the commit this page was made from: the board is hardware/universal_lights.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Universal lights design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers133.4 × 127 mm
Mss xcade
IowaScaledEngineering/mss-xcade
Modular Signal System 4 Port Complex Cascade
233 partsGPL-3.0 - 2 layers47.9 × 49.6 mm
BMP280Tiny
danheeks/vario
paragliding vario with arduino nano, piezo sounder, bmp180 altimeter, 4x Nimh batterys
45 parts11 - 2 layers100 × 99.9 mm
Panelized
SamWarmuth/SWSplitFlap
3D printable split flap display (software/pcb/STLs), for a more detailed split flap project see https://github.com/scottbez1/splitflap
144 parts4 - 2 layers89.6 × 59.3 mm
- 2 layers20.3 × 19.3 mm
- 2 layers97 × 23.7 mm
Homegreen Node Basic
pmalessa/homegreen-Node
The system is based on an inexpensive node, which is able to control up to 3 pumps and can be powered by nearly any conventional powerbank.
67 parts1 - 2 layers299.3 × 93.1 mm
