4 layers170.1 × 170.1 mm
2 layers89.6 × 59.3 mm
C4-blinkenrocket
cccc/Blastrocket1A Blinkenrocket adaption with c4 touch made with KiCAD
- Size
- 89.6 × 59.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 35
- Pads
- 118
- Tracks, vias
- 376, 39
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Nov 2019
- Updated
- 17 Nov 2019
Overview
C4-blinkenrocket is an open-source printed circuit board by cccc, from the cccc/Blastrocket repository on GitHub. It is a 2-layer board of 89.6 × 59.3 mm with 26 parts on 35 nets, routed with 376 tracks and 39 vias.
It is built around the ATTINY88-AU, BAT-HLD-001-THM and SJ1-3523N. Its parts include 6 resistors, 3 capacitors, 3 diodes, 2 ICs and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATTINY88-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 12MHz 28 512Byte 64Byte 8 Bit 8KB AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
BAT-HLD-001-THM
插件插件 Button And Strip Battery Connector ROHSTE ConnectivityButton And Strip Battery Connector
SJ1-3523N
插件,12x11mm-25℃~+85℃ 12V 12mm 14.3mm 1A 3.5mm Headphone Jack 5mm Black Brass、Stainless steel Right-Angle Silver TRS Plugin,12x11mm Audio Connectors ROHSCUIAudio Connectors
README
README.mdBlastrocket - A C4 flavored Blinkenrocket
With KiCad made clone of the https://github.com/blinkenrocket. Should be compatible with the original blinkenrocket, e.g. to use webbased [http://blinkenrocket.de/](programming tool) and the original build up manual.
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R4, R5, R6 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3 |
| 2 | 1N4148 | Diode_SMD:D_SOD-123 | D1, D2 |
| 2 | 470 nF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C2, C3 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | JP3, JP4 |
| 2 | SW_SPST | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1, SW2 |
| 1 | 10 uF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1 |
| 1 | 16 | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R3 |
| 1 | 24CW640-I_SN | footprints:SOIC-8_4.9x3.9mm_P1.27mm_Handsolder | U2 |
| 1 | 6k2 | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R2 |
| 1 | 8k2 | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1 |
| 1 | ATtiny88-AU | footprints:TQFP-32_7x7mm_P0.8mm_Handsolder | U1 |
| 1 | BAT-HLD-001-THM | footprints:BAT_Linx_BAT-HLD-001-THM | BT1 |
| 1 | ISP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | LED_Matrix_8x8 | footprints:LED_KWM-30881XVB_8x8_3mm_3.2x3.2mm | LED1 |
| 1 | LOGO | footprints:explosion | G*** |
| 1 | LOGO | footprints:hexogen-platine-soldermask-smallest | G*** |
| 1 | SJ1-3523N | footprints:Jack_3.5mm_CUI_SJ1-3523N_Horizontal | JP1 |
Questions
How big is the C4-blinkenrocket PCB?
It measures 89.6 × 59.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the C4-blinkenrocket use?
26 parts, built around the ATTINY88-AU, BAT-HLD-001-THM and SJ1-3523N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the C4-blinkenrocket KiCad files?
From the cccc/Blastrocket repository on GitHub, at the commit this page was made from: the board is c4-blinkenrocket.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the C4-blinkenrocket design in my own project?
Its repository states no licence, so its author keeps all rights: ask cccc before reusing the design.
Similar boards
- 2 layers26 × 16.5 mm
CR2032 Toaster v1.3
alxlab-zone66x/cr2032_toaster
CR2032 to 1/2AA converter to use in various old Macintosh computers that used 1/2AA batteries as the PRAM battery.
8 parts34 - 2 layers38.1 × 3.8 mm
Shio
uw-x/clearbuds-hw
Errata: The design contains some errors that can be addressed in future revisions. The errors do not affect function, but do affect robustness. 1. Add 0.1uF decoupling capacitor to PDM mic (ICS-41350) Vcc. 2.
86 parts17 - 2 layers47.9 × 49.6 mm
BMP280Tiny
danheeks/vario
paragliding vario with arduino nano, piezo sounder, bmp180 altimeter, 4x Nimh batterys
45 parts11 - 2 layers107 × 88 mm
Gps testing board
leonardoward/gps-development-boards
Development Board designed with KiCad for the ANTENOVA M20050-1 and the ATGM332D-5N31
33 parts5Apache-2.0 - 2 layers100 × 99.9 mm
Panelized
SamWarmuth/SWSplitFlap
3D printable split flap display (software/pcb/STLs), for a more detailed split flap project see https://github.com/scottbez1/splitflap
144 parts4 - 2 layers85 × 54 mm
- 2 layers20.3 × 19.3 mm
