

Mcguitarpedal
Teensy 4.1 custom built guitar effects pedal. Uses the Teensy Audio Library and LVGL. Custom PCB design and 3D printed enclosure
- Size
- 123 × 113.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 123
- Nets
- 129
- Pads
- 398
- Tracks, vias
- 721, 144
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 11 Mar 2024
- Updated
- 27 Mar 2025
Overview
Mcguitarpedal is an open-source printed circuit board by frsaba, from the frsaba/mcguitarpedal repository on GitHub. It is a 2-layer board of 123 × 113.5 mm with 123 parts on 129 nets, routed with 721 tracks and 144 vias.
It is built around the TEENSY 4.1, LM4562NA and 74HC148P-E, with the 74HCT595D and AMS1117-3.3 among its other parts. Its parts include 43 resistors, 17 capacitors, 14 diodes, 12 connectors and 7 ICs. It belongs with the audio and music boards and the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
5TEENSY 4.1
Development Boards & Kits - ARM ModuleSparkFun ElectronicsUncategorisedLM4562NA
PDIP-8-17V~-2.5V、2.5V~17V -40℃~+85℃ 0.00003% 10mA 120dB 2-Channel PDIP-8 Audio Amplifiers ROHSTexas InstrumentsAudio Amplifiers74HC148P-E
DIP-16-55℃~+125℃ 15ns@4.5V,50pF 2V~6V 4uA 5.2mA 5.2mA 74HC Decoder Single Supply DIP-16 Signal Switches, Multiplexers, Decoders ROHSRenesas ElectronicsSignal Switches, Multiplexers, Decoders74HCT595D
SOIC-16-40℃~+125℃ 1 25ns@4.5V,50pF 30MHz 4.5V~5.5V 500mW 6mA 74HCT 8 Serial-to-Serial or Parallel Tri-State SOIC-16 Shift Registers ROHSNexperiaShift RegistersAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdTeensy 4.1 Guitar Effects Pedal
Custom dual-layer PCB design:
- LM4562 based preamplifier stage with adjustable gain (1-20x) and 3-way attenuation switch for line-level compatibility
- 8+2+1 programmable buttons (up to 8 pushbuttons, 2 footswitches, 1 true bypass switch)
- 3 potentiometers (preamp gain + 2 programmable)
- 3 encoders (3 headers, but 2 are in use for now)
- 8 programmable LEDs
- 9V barrel jack input or USB power
Hardware
- Teensy 4.1
- Teensy Audio Adaptor board
- ILI9488 LCD panel (backlight brightness adjustable with PWM)
Software
- C++ with PlatformIO
- Teensy Audio Library
- UI made with LVGL
- 5 implemented effects (more to come):
- Chorus
- Flanger
- Tremolo
- Delay
- Reverb
Each effect can be separately toggled on/off and mixed with the dry/wet parameter. The effect parameters can be adjusted to tune the sound.
Misc. features
- Tuner mode
- Adjustable LED and display brightness
- Bypass switch
- Signal level feedback LED
- USB audio device for recording
- Headphone monitor out via Audio Board
Parts
123| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R13, R14, R15, R18, R19, R20, R21, R22, R23, R24, R25, R26, R30, R31, R32 |
| 10 | 330 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R4, R6, R7, R8, R9, R10, R11, R12, R16 |
| 6 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R35, R36, R38, R39, R41, R42 |
| 5 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C4, C8, C9, C17 |
| 5 | LED | mcguitarpedal:LED_D3.0mm | D10, D11, D12, D13, D14 |
| 5 | TestPoint | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP8, TP9, TP10, TP11, TP12 |
| 4 | 22u | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C1, C3, C5, C6 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2, H3, H4 |
| 3 | 470n | Capacitor_THT:C_Rect_L7.2mm_W3.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C10, C12, C16 |
| 3 | 50 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R27, R28, R29 |
| 3 | D_Schottky | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3 |
| 3 | Logo_Open_Hardware_Small | mcguitarpedal:Floating Potentiometer | POT1, POT2, POT3 |
| 3 | Logo_Open_Hardware_Small | mcguitarpedal:Floating Encoder | ENC1, ENC2, ENC3 |
| 2 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R33, R34 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R37 |
| 2 | 500 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, RG1 |
| 1 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R17 |
| 1 | 100n | Capacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C7 |
| 1 | 10µ | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C11 |
| 1 | 2.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R40 |
| 1 | 2.2n | Capacitor_THT:C_Rect_L7.5mm_W6.5mm_P5.00mm | C14 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 1 | 220n | Capacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C13 |
| 1 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | 4.7n | Capacitor_THT:C_Rect_L7.2mm_W7.2mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C15 |
| 1 | 74HC148 | TI_FOOTPRINTS:DIP16_300_TEX | U7 |
| 1 | 74HCT595 | TI_FOOTPRINTS:SOT109-1_NEX | U6 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | BC416 | Package_TO_SOT_THT:TO-92_Inline | Q2 |
| 1 | BTN_MTX | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J12 |
| 1 | ENC1 | mcguitarpedal:Encoder_headers | J9 |
| 1 | ENC2 | mcguitarpedal:Encoder_headers | J10 |
| 1 | ENC3 | mcguitarpedal:Encoder_headers | J11 |
| 1 | EXP | mcguitarpedal:Jack_6.35mm_Neutrik_NMJ6HCD2_Horizontal_3D_MODEL | J2 |
| 1 | Fuse 1A | Fuse:Fuse_Littelfuse_395Series | F1 |
| 1 | ILI9488 Module | mcguitarpedal:ILI9488 | J7 |
| 1 | IN | mcguitarpedal:Jack_6.35mm_Neutrik_NMJ6HCD2_Horizontal_3D_MODEL | J3 |
| 1 | LED_3V3 | mcguitarpedal:LED_D3.0mm | D7 |
| 1 | LED_5V | mcguitarpedal:LED_D3.0mm | D6 |
| 1 | LED_9V | mcguitarpedal:LED_D3.0mm | D5 |
| 1 | LED_BYPASS | LED_THT:LED_D5.0mm | D8 |
| 1 | LED_STATUS | LED_THT:LED_D5.0mm | D9 |
| 1 | LED_TUNER | LED_THT:LED_D5.0mm | D4 |
| 1 | LINE_LEVEL | mcguitarpedal:DP3T slide switch | SW5 |
| 1 | LM4562 | TI_FOOTPRINTS:lm4562 | U3 |
| 1 | OUT | mcguitarpedal:Jack_6.35mm_Neutrik_NMJ6HCD2_Horizontal_3D_MODEL | J1 |
| 1 | POT_HP_VOLUME_10k | mcguitarpedal:POTS_HEADER | J8 |
| 1 | PREAMP_HEADERS | mcguitarpedal:PREAMP_HEADERS | J6 |
| 1 | PWR | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | PWR_IN | Connector_BarrelJack:BarrelJack_Kycon_KLDX-0202-xC_Horizontal | J5 |
| 1 | SHIFT_CLK | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP2 |
| 1 | STPDWN-3P-5V | mcguitarpedal:STPDWN-3P-5V | U4 |
| 1 | SW_BYPASS | mcguitarpedal:SW_PUSH_DPDT | SW2 |
| 1 | SW_PRESET | mcguitarpedal:SW_PUSH_DPDT | SW4 |
| 1 | SW_PWR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 1 | SW_TUNER | mcguitarpedal:SW_PUSH_DPDT | SW3 |
| 1 | TP_LED_DATA | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP3 |
| 1 | TP_MISO | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP7 |
| 1 | TP_MOSI | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP5 |
| 1 | TP_SCLK | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP6 |
| 1 | TP_SIGNAL | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | TP1 |
| 1 | TP_STORE_CLK | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP4 |
| 1 | Teensy Audio Board | mcguitarpedal:4.0audioshield | U2 |
| 1 | Teensy4.1 | mcguitarpedal:Teensy 4.1 with audio board | U1 |
Similar boards
- 4 layers50 × 50 mm

- 4 layers306 × 244 mm

- 2 layers160 × 160 mm

6502-Computer
Kampi/6502-Computer
This is a W65C02 based microprocessor development and learning project.
84 parts1 - 2 layers170.2 × 170.2 mm

- 4 layers160 × 100 mm

K30p VME
transistorfet/retroverse
A collection of VME-based hardware and software for modular computers
133 parts17 - 2 layers89.1 × 49.9 mm

- 2 layers68.6 × 45.1 mm

- 4 layers167.7 × 111.2 mm

BB816-PCIE BANKZERO
Aronnax9000/BB816-MATX-PCIE
ATX form factor motherboard for Adrien Kohlbecker's BB816 CPU breakout board (rev. A27)
16 parts2
Questions
How big is the Mcguitarpedal PCB?
It measures 123 × 113.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mcguitarpedal use?
123 parts, built around the TEENSY 4.1, LM4562NA, 74HC148P-E and 74HCT595D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mcguitarpedal KiCad files?
From the frsaba/mcguitarpedal repository on GitHub, at the commit this page was made from: the board is pcb/mcguitarpedal/mcguitarpedal.kicad_pcb and its schematic pcb/mcguitarpedal/mcguitarpedal.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mcguitarpedal design in my own project?
Its repository states no licence, so its author keeps all rights: ask frsaba before reusing the design.