Skip to the content
12345678

LM4562NA

Texas InstrumentsExtended

-17V~-2.5V、2.5V~17V -40℃~+85℃ 0.00003% 10mA 120dB 2-Channel PDIP-8 Audio Amplifiers ROHS

Part id
ti/LM4562NA
Category
Audio Amplifiers
Package
PDIP-8
Pins
8
In stock
133 at JLCPCB (C2871355)
Used on
41 open-source boards

Overview

The LM4562NA is an audio Amplifier made by Texas Instruments in a PDIP-8 package with 8 pins. -17V~-2.5V、2.5V~17V -40℃~+85℃ 0.00003% 10mA 120dB 2-Channel PDIP-8 Audio Amplifiers ROHS.

PCBKit's library has its KiCad symbol (Amplifier_Operational:LM4562, from KiCad's library) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 133 are in stock at JLCPCB (part C2871355). 41 open-source boards in 34 repositories on GitHub use it.

Symbol

12-3+
Amplifier_Operational:LM4562From KiCad's library

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

8
The pins of the LM4562NA
PinNameType
1—Output
2-Input
3+Input
4V-Power in
5+Input
6-Input
7—Output
8V+Power in

Open-source boards using it

41See all 41
  • 2 layers67.3 × 74.9 mmEasysdr, the printed circuit board in 3D

    Easysdr

    michalin/easysdr

    Super Simple SDR Receiver

    140 parts115GPL-3.0
  • 2 layers101.6 × 137.4 mmOpenxcvr, the printed circuit board in 3D

    Openxcvr

    dawsonjon/OpenXcvr

    Cost Effective HF transceiver based on max1000 FPGA module

    155 parts38MIT
  • 2 layers81.3 × 33.7 mmSDRReciever, the printed circuit board in 3D

    SDRReciever

    Dizzerin/Software-Defined-Radio

    Quadrature sampling down converter software defined radio

    67 parts24
  • 2 layers97 × 97 mmQO100 RX, the printed circuit board in 3D

    QO100 RX

    barisdinc/N3B_SDR_Transceiver_HW

    V/U/SHF and QO-100 SDR Transceiver Project

    167 parts20GPL-3.0
  • 2 layers300 × 90 mmPreamp, the printed circuit board in 3D

    Preamp

    profdc9/PrettyGoodPreamplifier

    A Pretty Good Preamplifier for Stereo and Subwoofer Use

    222 parts10
  • 4 layers194 × 94 mmBottom board, the printed circuit board in 3D

    Bottom board

    mod-audio/hw-mod-dwarf

    Hardware project of MOD Dwarf

    319 parts6

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LM4562NA?

Yes. The symbol is Amplifier_Operational:LM4562 and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM4562NA?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the LM4562NA datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LM4562NA?

JLCPCB lists it as part C2871355, with 133 in stock; the sellers' links on this page open their listings.

What can replace the LM4562NA?

Parts like it in the library: the LM386N-4 by Texas Instruments, the LME49720NA by Texas Instruments, the TDA2822N by HGSEMI and the LM386N by HTC Korea TAEJIN Tech. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM4562NA?

41 boards in 34 repositories on GitHub; the most starred are listed on this page, with their KiCad files.