2 layers90 × 55 mm
2 layers150 × 100 mm
Frontpanel
frep/kicad2workspace for kicad projects
- Size
- 150 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 85
- Nets
- 100
- Pads
- 316
- Tracks, vias
- 562, 31
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 22 Oct 2014
- Updated
- 6 Nov 2016
Overview
Frontpanel is an open-source printed circuit board by frep, from the frep/kicad repository on GitHub. It is a 2-layer board of 150 × 100 mm with 85 parts on 100 nets, routed with 562 tracks and 31 vias.
It is built around the TPS2513DBV, AZ1117CD and MCP23017-E/SS, with the MCP73833, JUMPER3 and NHD-1.69-160128UGC3 among its other parts. Its parts include 23 resistors, 20 connectors, 11 capacitors, 9 diodes and 8 ICs. It belongs with the ESP8266 boards of this library.
Main components
6
TPS2513DBV
SOT-23-6-40℃~+125℃ 155uA 4.5V~5.5V Not supported Under-voltage lockout SOT-23-6 USB PD ROHSTexas InstrumentsPower Distribution Switches
AZ1117CD
800mA LDO Voltage RegulatorDiodes IncorporatedUncategorised
MCP23017-E/SS
SSOP-28(5.3x10.2x0.65)-40℃~+125℃ 1.7MHz 1.8V~5.5V 16 1uA 600mV 8 8mA I2C Interrupt Output Reset function、Cascading and address extension SSOP-28 I/O Expanders ROHSMicrochip TechnologyI/O Expanders
MCP73833
UncategorisedMicrochip TechnologyJUMPER3
HDR-TH_3P-P2.54-L7.6-W2.5HDR-TH-3P-2.54mm New Arrivals ROHSWürth ElektronikUncategorisedNHD-1.69-160128UGC3
-1.7 160x128 SEPS525 chip - OLED Display ROHSNewhaven DisplayOLED Display
README
projects/ArduinoController/readme.mdArduino Controller
description is following soon...
Parts
85| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 10K | frep:R0805 | R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17, R19, R20, R21, R22 |
| 5 | BindingPost | frep:BindingPost | P8, P10, P13, P14, P15 |
| 4 | 10nF | frep:C0805 | C8, C9, C10, C11 |
| 4 | 1K | frep:R0805 | R1, R2, R6, R18 |
| 4 | MH | frep:MountingHole_3mm | P2, P3, P4, P5 |
| 4 | TAC_SWITCH | frep:TACTILE-PTH | S1, S2, S3, S4 |
| 3 | 1uF | frep:C0805 | C3, C4, C5 |
| 3 | CONN_2 | frep:Pin_Proto_Straight_1x02 | P6, P7, P12 |
| 3 | FUSE | frep:C1812 | F1, F2, F3 |
| 3 | TPS2513 | frep:SOT23-6 | U1, U2, U3 |
| 3 | USB-A-stacked | frep:USB-A-Stacked | CON1, CON2, CON3 |
| 2 | 270 | frep:R0805 | R4, R5 |
| 2 | 4u7F | frep:C0805 | C1, C2 |
| 2 | DIODE | frep:Diode-MiniMELF_Handsoldering | D8, D9 |
| 2 | DIODE | frep:DO-221BC | D6, D7 |
| 2 | RotaryEncoder | frep:RotaryEncoder | ENC1, ENC2 |
| 1 | frep:LOGO3 | LOGO3 | |
| 1 | frep:ruum42_14x14mm | LOGO | |
| 1 | 100nF | frep:C0805 | C7 |
| 1 | 10R 10W | frep:R_ceramic_48x9p5x9mm | R3 |
| 1 | 10uF | frep:C0805 | C6 |
| 1 | 200 | frep:R0805 | R23 |
| 1 | AD5274 | frep:MSOP10 | U7 |
| 1 | AZ1117 | frep:SOT223 | U4 |
| 1 | CONN_2 | frep:JST-PH-2-THM | P16 |
| 1 | Charged | frep:LED-0805 | D4 |
| 1 | Charging | frep:LED-0805 | D5 |
| 1 | INPUT_TERMINAL | frep:terminal_3p5mm_8pin | P1 |
| 1 | JUMPER | frep:Pin_Proto_Straight_1x02 | JP2 |
| 1 | JUMPER3 | frep:Pin_Proto_Straight_1x03 | JP1 |
| 1 | LoadOn | frep:LED-0805 | D3 |
| 1 | LoadSwitch | frep:LoadSwitch | P11 |
| 1 | MCP23017 | frep:SOIC28W | U8 |
| 1 | MCP73833 | frep:MSOP10 | U6 |
| 1 | MainsOn | frep:LED-0805 | D2 |
| 1 | NHD-1.69-160128UGC3 | frep:NHD-1.69-160128UGC3 | P17 |
| 1 | OnOffSwitch | frep:RockerSwitch | P9 |
| 1 | PowerGood | frep:LED-0805 | D1 |
| 1 | TERMINAL | frep:terminal_3p5mm_3pin | K1 |
| 1 | esp8266Feather | frep:featherEsp | U5 |
Questions
How big is the Frontpanel PCB?
It measures 150 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Frontpanel use?
85 parts, built around the TPS2513DBV, AZ1117CD, MCP23017-E/SS and MCP73833. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Frontpanel KiCad files?
From the frep/kicad repository on GitHub, at the commit this page was made from: the board is projects/LabBenchPsu/RevB/frontpanel/frontpanel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Frontpanel design in my own project?
Its repository states no licence, so its author keeps all rights: ask frep before reusing the design.
More from frep/kicad
6- 2 layers100 × 80 mm
- 2 layers227.1 × 265 mm
- 2 layers85 × 56 mm
- 2 layers69.9 × 66 mm
- 2 layers45.7 × 33 mm
Similar boards
- 2 layers37.5 × 41.3 mm
- 2 layers150 × 100 mm
Ant sw control
sq9fk/ant-sw-2x6
Firmware sterownika przełącznika antenowego 6 anten × 2 TRX oparty na projekcie RemoteQTH 6×2 Antenna Controller (oryginał OK1HRA, rev 0.3), zmodyfikowany przez SQ9FK na potrzeby stacji SP9PDF.
145 parts - 2 layers68 × 164 mm
VController display board
sixeight7/VController_v3
Production model of the VController, VC-mini and VC-touch
31 parts80 - 4 layers159 × 130 mm
- 2 layers76 × 76 mm
- 2 layers165 × 127 mm
YF1
SK21/YieldFlo
YieldFlo is a combine yield and moisture monitoring system that works alongside AgOpenGPS. A Windows desktop app records yield rate, moisture, and GPS position continuously while harvesting, and produces spatial yield…
60 parts5GPL-3.0 - 4 layers45 × 67 mm
Duuntgoompt
AjaxAttack/Duuntgoompt-KiCad-Project
Duuntgoompt embedded systems project esp32 wifi PCB
76 parts1 - 2 layers20 × 35 mm
Breadboardpower
hnz1102/breadboard-power-alligator
BREAD BOARD POWER ALLIGATOR : Power Supply for Bread-Board
21 parts1