2 layers90 × 55 mm
2 layers227.1 × 265 mm
ArduinoController
frep/kicad2workspace for kicad projects
- Size
- 227.1 × 265 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 106
- Nets
- 107
- Pads
- 406
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 3
- Created
- 22 Oct 2014
- Updated
- 6 Nov 2016
Overview
ArduinoController is an open-source printed circuit board by frep, from the frep/kicad repository on GitHub. It is a 2-layer board of 227.1 × 265 mm with 106 parts on 107 nets.
It is built around the LM358, PCF8574T and ATMEGA32U4, with the NCP1117ST and LSM9DS0 among its other parts. Its parts include 29 capacitors, 23 resistors, 12 connectors, 9 ICs and 6 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5
LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational Amplifier
PCF8574T
SOP-16-300mil-40℃~+85℃ 100kHz 10uA 2.5V~6V 25mA 300uA 8 8 Cascading and address extension、Built-in LED driver I2C Interrupt Output Open-drain SOP-16-300mil I/O Expanders ROHSHGSEMII/O Expanders
ATMEGA32U4
UncategorisedUnknown maker
NCP1117ST
1.0 A Low-Dropout Fixed RegulatoronsemiUncategorised
LSM9DS0
LGA-24(4x4)- Lack of specifications ROHSSTMicroelectronicsUncategorised
README
projects/ArduinoController/readme.mdArduino Controller
description is following soon...
Parts
106| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100nF | frep:C0805 | C6, C7, C8, C9, C10, C11, C12, C13, C14, C16, C17, C19, C21, C27, C29 |
| 13 | 10K | frep:R0805 | R1, R2, R3, R4, R5, R6, R7, R8, R10, R13, R14, R15, R19 |
| 8 | Neopixel | frep:Neopixel | N1, N2, N3, N4, N5, N6, N7, N8 |
| 5 | 220 | frep:R0805 | R18, R20, R21, R22, R23 |
| 4 | 10nF | frep:C0805 | C1, C2, C4, C15 |
| 4 | 1uF | frep:C0805 | C18, C24, C25, C26 |
| 4 | TAC_SWITCH | frep:TACTILE-PTH | S2, S3, S4, S5 |
| 3 | 10uF | frep:C0805 | C22, C23, C28 |
| 3 | CONN_4 | frep:grove_con_angled | P1, P4, P5 |
| 2 | 18pF | frep:C0805 | C3, C5 |
| 2 | 1K | frep:R0805 | R16, R17 |
| 2 | 33 | frep:R0805 | R11, R12 |
| 2 | BH_2xAA | frep:Batterieholder_2xAA | BH1, BH2 |
| 2 | CONN_4 | frep:Pin_Proto_Straight_1x04 | P2, P6 |
| 2 | MOSFET-N | frep:SOT23 | Q1, Q2 |
| 2 | MOSFET-P | frep:SOT23 | Q3, Q4 |
| 1 | 16MHz | frep:HC49UP | X1 |
| 1 | 1M | frep:R0805 | R9 |
| 1 | 4.7uF | frep:C0805 | C20 |
| 1 | AD5274 | frep:MSOP10 | U2 |
| 1 | ATMEGA32U4 | frep:TQFP44 | U1 |
| 1 | BLE_Friend | frep:bluetooth_friend | BLE1 |
| 1 | CONN_1 | frep:Pin_Proto_Straight_1x01 | P7 |
| 1 | CONN_2 | frep:Pin_Proto_Straight_1x02 | P8 |
| 1 | CONN_3X2 | frep:Pin_Proto_Straight_2x03 | P3 |
| 1 | CONN_5 | frep:Pin_Header_Proto_1x05 | P9 |
| 1 | DCBARREL | frep:DCJACK_2MM_PTH | CN1 |
| 1 | DIODE | frep:Diode-MiniMELF_Handsoldering | D1 |
| 1 | FUSE | frep:C1812 | F1 |
| 1 | Ferrit Bead | frep:R0805 | L1 |
| 1 | ISL21070 | frep:SOT23 | U6 |
| 1 | Joystick | frep:Joystick | J1 |
| 1 | LDR | frep:LDR | LDR1 |
| 1 | LED | frep:LED-0805 | D2 |
| 1 | LM358 | frep:SOIC8 | IC2 |
| 1 | LSM9DS0 | frep:lsm9ds0 | LSM1 |
| 1 | MCP1700 | frep:SOT23 | U5 |
| 1 | MCP4716 | frep:SOT23-6 | U7 |
| 1 | NCP1117 | frep:SOT23 | U4 |
| 1 | PCF8574 | frep:SO16 | U3 |
| 1 | POWER | frep:LED-0805 | D3 |
| 1 | RX | frep:LED-0805 | D6 |
| 1 | Reset | frep:TACTILE-PTH | S1 |
| 1 | SPDT | frep:Switch_SPDT | S6 |
| 1 | TMP36 | frep:SOT23-5L | IC1 |
| 1 | TX | frep:LED-0805 | D5 |
| 1 | USB-MICRO | frep:USB_Micro | CON1 |
| 1 | V_BAT | frep:LED-0805 | D4 |
| 1 | WIFI_CC3000 | frep:wifi_board | WIFI1 |
Questions
How big is the ArduinoController PCB?
It measures 227.1 × 265 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ArduinoController use?
106 parts, built around the LM358, PCF8574T, ATMEGA32U4 and NCP1117ST. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ArduinoController KiCad files?
From the frep/kicad repository on GitHub, at the commit this page was made from: the board is projects/ArduinoController/ArduinoController.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ArduinoController design in my own project?
Its repository states no licence, so its author keeps all rights: ask frep before reusing the design.
More from frep/kicad
6- 2 layers100 × 80 mm
- 2 layers150 × 100 mm
- 2 layers85 × 56 mm
- 2 layers69.9 × 66 mm
- 2 layers45.7 × 33 mm
Similar boards
- 4 layers145 × 127 mm
- 2 layers268 × 175 mm
- 2 layers100 × 40 mm
Imu benchmark
norlab-ulaval/imu-benchmark-pcb
Small KiCad project to integrate small IMUs on a I²C bus
17 parts - 4 layers25.4 × 55.8 mm
- 2 layers93 × 35 mm
- 2 layers151 × 118 mm
- 2 layers100.1 × 63.1 mm
Fg99
endlos99/finalgrom99
A cartridge for the TI 99/4A that runs ROM and GROM images from an SD card
34 parts96GPL-3.0 - 2 layers61.8 × 18.5 mm
