Skip to the content
PCBKitNew board
MCP73833 on a board, in 3D

MCP73833

Microchip Technology

microchip/MCP73833
Category
Uncategorised
Pins
10

Overview

The MCP73833 is an uncategorised made by Microchip Technology with 10 pins.

PCBKit's library has its KiCad symbol (SparkFun-IC-Power:MCP73833, from Sparkfun-kicad) and its footprint (SparkFun-Semiconductor-Standard:MSOP-10_3x3mm_P0.5mm, from Sparkfun-kicad), ready for a KiCad board. 41 open-source boards in 27 repositories on GitHub use it.

Symbol

VDD2STAT13STAT24VSS5PROG6PG7THERM8V_{BAT}9
SparkFun-IC-Power:MCP73833From Sparkfun-kicad

Footprint

SparkFun-Semiconductor-Standard:MSOP-10_3x3mm_P0.5mmFrom Sparkfun-kicad

Pinout

10
The pins of the MCP73833
PinNameType
1VDDPower in
2VDDPower in
3STAT1Output
4STAT2Output
5VSSPower in
6PROGInput
7PGOutput
8THERMInput
9V_{BAT}Power out
10V_{BAT}Power out

Open-source boards using it

All 41
  • 4 layers36 × 50.2 mmRacer, the printed circuit board in 3D

    Racer

    StuckAtPrototype/Racer

    These are structured into their own files. I could have used submodules, but decided against it.

    83 parts3.8kApache-2.0
  • 4 layers74.7 × 30 mmController, the printed circuit board in 3D

    Controller

    StuckAtPrototype/Thumbtroller

    77 parts305
  • 4 layers49 × 74.9 mmPCB business card, the printed circuit board in 3D

    PCB business card

    StuckAtPrototype/PCB_business_card_remake

    A custom PCB based "business" card that lets you play a version of Flappy Bird.

    311 parts132Apache-2.0
  • 4 layers536.5 × 385.7 mmDC27-badge, the printed circuit board in 3D

    DC27-badge

    netik/dc27_badge

    Defcon 27 "DaBomb!" badge.

    141 parts30Apache-2.0
  • 6 layers50 × 85 mmRusty tracker, the printed circuit board in 3D

    Rusty tracker

    korken89/rusty-tracker

    There are 2 versions of the board, based on:

    181 parts14
  • 6 layers131 × 80 mmOpenHardwareHolterMonitor, the printed circuit board in 3D

    OpenHardwareHolterMonitor

    OpenElectronicsLab/OpenHardwareHolterMonitor

    OpenHardware ECG Holter Monitor

    165 parts9GPL-3.0
  • 4 layers70 × 40 mmLora daq module, the printed circuit board in 3D

    Lora daq module

    danielkm-ee/lora_daq_module

    This board is powered by the Seeed Studios Wio-E5 LoRA module for use with it's designated antenna.

    81 parts1MIT
  • 2 layers114.4 × 26.7 mmRobot1, the printed circuit board in 3D

    Robot1

    iwasz/robot-hw-design

    Open this repo with KiCad. Firmware is here : http://github.com/iwasz/robot-firmware

    111 parts1

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/microchip/MCP73833" title="MCP73833 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/microchip/MCP73833.jpg" alt="MCP73833" width="1200" height="900">
A picture that opens the part, for a README
[![MCP73833](https://pcbkit.io/embed/parts/microchip/MCP73833.jpg?size=s)](https://pcbkit.io/parts/microchip/MCP73833)

Questions

Is there a KiCad symbol and footprint for the MCP73833?

Yes. The symbol is SparkFun-IC-Power:MCP73833 and the footprint SparkFun-Semiconductor-Standard:MSOP-10_3x3mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What can replace the MCP73833?

Parts like it in the library: the ADS1015LIDGSR by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP73833?

41 boards in 27 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

1