

Adventures in Electronics
- Size
- 180.3 × 154.9 mm
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 116
- Nets
- 177
- Pads
- 683
- Tracks, vias
- 1,905, 227
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 1 Oct 2022
- Updated
- 2 Jun 2024
Overview
DALU is an open-source printed circuit board by freesurfer-rge, from the freesurfer-rge/slothpu repository on GitHub, published under the MIT licence. It is a 4-layer board of 180.3 × 154.9 mm with 116 parts on 177 nets, routed with 1,905 tracks and 227 vias.
It is built around the 74HC245D, 74HC86D and 74HC08D, with the 74HC32D, 74HC00D and 74HC283P-E among its other parts. Its parts include 37 resistors, 28 capacitors, 28 ICs, 20 diodes and 3 connectors.
Main components
1074HC245D
SO-20-300mil-40℃~+125℃ 1 160uA 2V~6V 7.8mA 7.8mA 74HC 8 9ns@4.5V,50pF Bidirectional Tri-State SOIC-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers74HC86D
SO-14-40℃~+125℃ 1.5V~4.2V 20ns@6V,50pF 2V~6V 2uA 4 5.2mA 5.2mA 500mV~1.8V 74HC Series XOR Gate SOIC-14 Logic Gates ROHSNexperiaLogic Gates74HC08D
SOP-14-40℃~+125℃ 1.5V~4.2V 1.9V、3.7V、5.2V 100mV、400mV 2 27ns@4.5V,50pF 2V~6V 2uA 4 5.2mA 5.2mA 500mV~1.8V 74HC Series AND Gate SOIC-14 Logic Gates ROHSNexperiaLogic Gates74HC32D
SOP-14-40℃~+125℃ 1.5V~4.2V 1.9V、4.4V、5.9V 100mV、400mV、400mV 2 2V~6V 2uA 4 5.2mA 5.2mA 500mV~1.8V 6ns@6V,50pF 74HC Series OR Gate SOIC-14 Logic Gates ROHSNexperiaLogic Gates74HC00D
SOP-14-40℃~+125℃ 1.5V、3.15V、4.2V 1.9V、3.7V、5.9V 100mV、400mV、400mV 2 2V~6V 4 40uA 5.2mA 5.2mA 500mV~1.8V 74HC Series 7ns@6V,50pF NAND Gate SOIC-14 Logic Gates ROHSNexperiaLogic Gates74HC283P-E
-- Specialty Logic ROHSRenesas ElectronicsSpecialty Logic74HC138
SOP-160℃~+70℃ 24ns@5.0V,16pF 2V~6V 3/8 5.2mA 5.2mA 5uA 74HC Decoder Reverse function Single Supply SOP-16 Signal Switches, Multiplexers, Decoders ROHSGRSignal Switches, Multiplexers, Decoders74HC14
SOP-14-40℃~+85℃ 1.9V、3.98V、4.4V、5.48V、5.9V 100mV、260mV、260mV 20uA 25ns@4.5V,50pF 2V~6V 6 74HC Noise suppression function Schmitt trigger SOP-14 Inverters ROHSJSMSEMIInverters74HC74D
SOIC-14-40℃~+125℃ 1 15ns 2 2V~6V 3.5pF 37ns@6V,50pF 3ns、3ns、3ns 40uA 5.2mA 5.2mA 74HC Series 82MHz Asynchronous Complementary D-Type Rising Edge Set and Reset SOIC-14 Flip Flops ROHSNexperiaFlip Flops74HCT574D
SO-20-300mil-40℃~+125℃ 1 18ns@4.5V,50pF 3.5pF 3ns 4.5V~5.5V 5ns 69MHz 6mA 6mA 74HCT Series 8 8uA D-Type Rising Edge Tri-State SOIC-20-300mil Flip Flops ROHSNexperiaFlip Flops
README
README.mdslothpu
During September 2022, I somehow got it into my head to try my hand a building a computer. After all, when would be better for such an endeavour than the middle of a worldwide shortage of electronics parts. Armed with some hazy memories of CST 1a (25%) and access to wikipedia, I set out on my quest. This repo will hold the fruits of my labours.
Parts
116| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | 100n | Capacitor_SMD:C_0603_1608Metric | C201, C202, C203, C301, C401, C402, C403, C404, C405, C406, C407, C408, C501, C502, C503, C601 +12 |
| 20 | 4k7 | Resistor_SMD:R_0603_1608Metric | R301, R302, R303, R304, R305, R306, R307, R308, R309, R310, R311, R312, R809, R810, R811, R812 +4 |
| 20 | LED | LED_SMD:LED_0603_1608Metric | D301, D302, D303, D304, D305, D306, D307, D308, D309, D310, D311, D312, D801, D802, D803, D804 +4 |
| 16 | 220k | Resistor_SMD:R_0603_1608Metric | R201, R202, R203, R204, R205, R206, R207, R208, R801, R802, R803, R804, R805, R806, R807, R808 |
| 9 | 74HC245 | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U201, U202, U203, U407, U408, U503, U603, U703, U903 |
| 5 | 74HC86 | Package_DIP:DIP-14_W7.62mm_Socket | U401, U403, U404, U601, U602 |
| 3 | 74HC08 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U402, U901, U902 |
| 3 | 74HC32 | Package_DIP:DIP-14_W7.62mm_Socket | U701, U702, U802 |
| 2 | 74HC00 | Package_DIP:DIP-14_W7.62mm_Socket | U501, U502 |
| 2 | 74HC283 | Package_DIP:DIP-16_W7.62mm_Socket | U405, U406 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R817 |
| 1 | 74HC138 | Package_DIP:DIP-16_W7.62mm_Socket | U301 |
| 1 | 74HC14 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U803 |
| 1 | 74HC74 | Package_DIP:DIP-14_W7.62mm_Socket | U801 |
| 1 | 74HCT574 | Package_DIP:DIP-20_W7.62mm_Socket | U804 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J101 |
| 1 | Conn_01x09 | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J102 |
| 1 | Conn_02x20_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J201 |
More from freesurfer-rge/slothpu
5- 4 layers251.5 × 116.8 mm

- 4 layers154.9 × 144.8 mm

- 2 layers73.7 × 129.5 mm

- 2 layers52.1 × 129.5 mm

- 2 layers40.6 × 129.5 mm

Similar boards
- 2 layers178 × 711 mm

- 2 layers299.7 × 198.1 mm

Cisc-8
nailed-barnacle/Cisc-8-ttl-processor
A cut-down version of the 8080 processor using HCTTL and including a discrete ALU and instruction decoder
319 parts1MIT - 2 layers208 × 110 mm

- 2 layers213.1 × 129 mm

- 2 layers245.1 × 160 mm

8-Bit CPU 32k
slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.
139 parts326 - 2 layers191.8 × 121.3 mm

8-Bit CPU 32k
slu4coder/Minimal-UART-Computer-1-2
Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed
109 parts184 - 2 layers306.1 × 130.2 mm

8-Bit CPU 32k
slu4coder/Minimal-64-Home-Computer
Legacy: Full TTL-only home computer with VGA and PS/2 and twice the processing power of a Commodore 64
132 parts94 - 2 layers297 × 210 mm

Questions
How big is the DALU PCB?
It measures 180.3 × 154.9 mm and has 4 copper layers, 4.69 mm thick.
What parts does the DALU use?
116 parts, built around the 74HC245D, 74HC86D, 74HC08D and 74HC32D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DALU KiCad files?
From the freesurfer-rge/slothpu repository on GitHub, at the commit this page was made from: the board is pcbs/DALU/DALU.kicad_pcb and its schematic pcbs/ALU Connector/ALU Connector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DALU design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).