

Weather pill
An ultra low power weather data logger
- Size
- 42.9 × 16 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 66
- Nets
- 83
- Pads
- 344
- Tracks, vias
- 639, 91
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 Apr 2023
- Updated
- 30 Aug 2025
Overview
Weather pill is an open-source printed circuit board by freder202, from the freder202/weather_pill repository on GitHub. It is a 4-layer board of 42.9 × 16 mm with 66 parts on 83 nets, routed with 639 tracks and 91 vias.
It is built around the BME280, BMP581 and HDC2010YPAR, with the TPS22916CYFPR, USBLC6-2P6 and CUS-12TB among its other parts. Its parts include 33 resistors, 15 capacitors, 8 ICs, 3 switches and 2 connectors. It belongs with the STM32 boards of this library.
Main components
8BME280
LGA-8(2.5x2.5)-40℃~+85℃ 0%RH~100%RH 1.71V~3.6V 1.8uA 16bit I2C、SPI ±0.5℃ ±3%RH LGA-8(2.5x2.5) Temperature and Humidity Sensor ROHSBoschTemperature And Humidity SensorBMP581
LGA-10(2x2)-40℃~+85℃ 0.5pa/K 1.71V~3.6V 1uA 30Kpa~1.25bar 6pa I2C、SPI、I3C LGA-10(2x2) Pressure Sensors ROHSBosch SensortecPressure SensorsHDC2010YPAR
DSBGA-6-40℃~+85℃ 0%RH~100%RH 1.62V~3.6V 11bit 550nA I2C ±0.2℃ ±2%RH DSBGA-6 Temperature and Humidity Sensor ROHSTexas InstrumentsTemperature And Humidity SensorTPS22916CYFPR
DSBGA-4(0.7x0.7)-40℃~+85℃ 1 1V~5.5V 2A 60mΩ Active High Load Switch Output discharge function、Soft-start、Reverse current blocking DSBGA-4(0.7x0.7) Power Distribution Switches ROHSTexas InstrumentsPower Distribution SwitchesUSBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)CUS-12TB
插件-20℃~+70℃ 4V PC Pin Rectangular Columnar SPDT Surface Mount,Vertical 插件 Slide Switches ROHSNidecSlide SwitchesLTST-C190GKT
0603-55℃~+85℃ 100mW 130° 2.1V 20mA 565nm 569nm 6mcd Discrete Diode Water Clear Yellow Green 0603 LED Indication - Discrete ROHSLite-OnLED Indication - DiscreteUSB4105-GF-A
SMD-40℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
README.mdA small and compact weather logging station to use for outdoor adventures
The goal is to log the temperature, humidity, while having it displayed on a small lcd
The battery life is expected to be 2 years on a CR2032
This is the Rev2, which is currently being tested as of August 2025

Parts
66| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | 0R | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R1, R10, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R30, R31, R32 +9 |
| 13 | 100nF | LED_SMD:LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C13, C15, C16 |
| 2 | 1M | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R8, R13 |
| 2 | 1uf | LED_SMD:LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | C11, C12 |
| 2 | 47k | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R11, R12 |
| 2 | 5.1k | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R3, R4 |
| 2 | EVQ-P7A01P | button EVQ:EVQ_P7_PAN | SW3, SW4 |
| 1 | 1056 | batt12mm:BAT_1056 | BT1 |
| 1 | 1K | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R2 |
| 1 | 470R | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R29 |
| 1 | BME280 | Package_LGA:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U5 |
| 1 | BMP581 | bmp581:QFN10_BMP581_BOS-M | U7 |
| 1 | CUS-12TB | batt_switch:CUS-12TB_NDC | SW1 |
| 1 | Conn_ARM_SWD_TagConnect_TC2030-NL | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J1 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
| 1 | HDC2010YPAR | HDC:BGA6C100X50P2X3_HDC2010YPAR | U6 |
| 1 | LTST-C190GKT | green led:LEDM1608X80 | D1 |
| 1 | SHT4x | Sensor_Humidity:Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad | U3 |
| 1 | STM32L072KZUx | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U8 |
| 1 | TPS22916CYFPR | loadswitch:YFP0004ABAB | U4 |
| 1 | USB4105-GF-A | usb conn atomic:GCT_USB4105-GF-A | J2 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U1 |
| 1 | VBATT | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | ~ | led7segment:INND-SS30 | L1 |
| 1 | ~ | Package_DFN_QFN:HVQFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm | U2 |
Similar boards
- 4 layers30 × 45 mm

- 4 layers50 × 25 mm

- 2 layers30 × 30 mm

ReCamera Gimbal
Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.
123 parts495Apache-2.0 - 6 layers15.6 × 19.7 mm

ADC Board
esl-epfl/X-MODs
Modular hardware platform based on the RISC-V X-HEEP family architecture developed at ESL, targeting ultra-low-power consumption and miniaturization, facilitating the creation of wearable devices for clinical trials
74 parts3 - 2 layers50.8 × 88.9 mm

Solar glow drh v4 0
devinhorowitz/solar-business-card
Front — the card face Back — the component side
70 partsMIT - 2 layers41.2 × 80 mm

XIAO ePaper Display Board EE04 V1.2
doug-harriman/E-Display
Electronic display for calendars, weather, etc.
176 partsMIT - 4 layers41.2 × 80 mm

- 6 layers17.8 × 21.1 mm

Questions
How big is the Weather pill PCB?
It measures 42.9 × 16 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Weather pill use?
66 parts, built around the BME280, BMP581, HDC2010YPAR and TPS22916CYFPR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Weather pill KiCad files?
From the freder202/weather_pill repository on GitHub, at the commit this page was made from: the board is WeatherPill/WeatherPill.kicad_pcb and its schematic WeatherPill/WeatherPill.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Weather pill design in my own project?
Its repository states no licence, so its author keeps all rights: ask freder202 before reusing the design.