

TSAL RED
Repo for 2026 circuit boards
- Size
- 83.5 × 64.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 33
- Pads
- 114
- Tracks, vias
- 179, 321
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 25 Sep 2024
- Updated
- 19 Jun 2026
Overview
TSAL RED is an open-source printed circuit board by FormulaBartonRacing, from the FormulaBartonRacing/Electronics repository on GitHub. It is a 2-layer board of 83.5 × 64.7 mm with 43 parts on 33 nets, routed with 179 tracks and 321 vias.
It is built around the LM358, NE555D and AO3401A, with the G2RL-1-E DC5 among its other parts. Its parts include 19 resistors, 4 capacitors, 4 connectors, 3 ICs and 3 diodes.
Main components
4LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational AmplifierNE555D
SOIC-80℃~+70℃ 10mA 4.5V~16V SOIC-8 555 Timers / Counters ROHSTexas InstrumentsTimers / CountersAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsG2RL-1-E DC5
DIP,28.8x12.5mm-40℃~+85℃ 100mΩ 15ms 16A 16A@250VAC、16A@24VDC 300V@DC、440V@AC 400mW 5V 5ms 62.5Ω 8 Non-Polarized - Single Coil One set changeover: 1C (SPDT - changeover) Silver Alloy (Cd-Free) DIP,28.8x12.5mm Power Relays ROHSOmronPower Relays
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2, H3, H4 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C4 |
| 2 | 2.2K | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R4, R12 |
| 2 | 2.7K | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R5, R13 |
| 2 | 2k2 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R29 |
| 2 | Conn_01x02 | Connector_Molex:Molex_Mini-Fit_Jr_5566-02A_2x01_P4.20mm_Vertical | J1, J2 |
| 1 | 1.2K | Chassis_Resistor:HSA25 | R14 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R27 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 12K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | 12k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 150 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R15 |
| 1 | 180 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R28 |
| 1 | 18K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R26 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D2 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 220k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 22k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | 330K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 33K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 4N35 | Package_DIP:DIP-6_W7.62mm | U2 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | Conn_02x01 | Connector_Molex:Molex_Micro-Fit_3.0_43045-0212_2x01_P3.00mm_Vertical | J5 |
| 1 | Conn_02x03_Counter_Clockwise | Connector_Molex:Molex_Micro-Fit_3.0_43045-0612_2x03_P3.00mm_Vertical | J6 |
| 1 | G2RL-1-E | Relay_THT:Relay_DPDT_Omron_G2RL-2 | K2 |
| 1 | GRN | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | LM358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | LOGO | LOGO | G*** |
| 1 | NE555D | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | RKZE-1205S_HP | Recom 12V Isolated:CONV_RKZE-1205S_HP | PS1 |
| 1 | VHI | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
The 42 most common of 43 parts.
More from FormulaBartonRacing/Electronics
4- 2 layers85 × 85 mm

- 2 layers65.1 × 52.9 mm

- 2 layers87.6 × 58.1 mm

- 2 layers34.7 × 99.9 mm

Similar boards
- 4 layers99 × 146 mm

Carte principale
Unimakers/CDR-2027
Ce repo est un site de documentation réalisé par l'équipe des première et deusième années pré-ingénieur de l'école Unilasalle-Amiens, membre de l'association de robotique Unimaker, dans le cadre de leur participation à…
156 parts1 - 2 layers99.1 × 99.1 mm

Connector test stand
L0czek/rakieta
The starter board provides the ignition impulse to fire the engine. It includes an I2C IO expander and an 8-channel digital comparator to require a correct safety byte/address to be present before firing.
86 parts - 2 layers100 × 100 mm

HF PA Radio Interface
RADARC/Modular-PA-Controller
Controller for High Power RF Power Amplifiers based Raspberry Pi Pico
187 parts - 2 layers85 × 130 mm

RayRigAntSw
RFStateSide/RayRigAntSw
RF relay switching board for radio, antenna, and amplifier routing. Public Engineering Reference — AS-IS.
27 partsCERN-OHL-P-2.0 - 4 layers117 × 92 mm

- 2 layers180.9 × 110 mm

Saunasteuerung ESP Home
Technolitix/Sauna-Contoller
Standalone sauna controller running ESPHome, compatible with Home Assistant for smart temperature, timer, and lighting control.
103 partsMIT - 2 layers175 × 85 mm

Control pcb
ViKozh/ctrl.energy
ESPHome-based node for energy monitoring with additional functionality
113 partsMIT - 2 layers94 × 48.3 mm

Questions
How big is the TSAL RED PCB?
It measures 83.5 × 64.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TSAL RED use?
43 parts, built around the LM358, NE555D, AO3401A and G2RL-1-E DC5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TSAL RED KiCad files?
From the FormulaBartonRacing/Electronics repository on GitHub, at the commit this page was made from: the board is TSAL-RED/TSAL-RED.kicad_pcb and its schematic BSPD/BSPD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TSAL RED design in my own project?
Its repository states no licence, so its author keeps all rights: ask FormulaBartonRacing before reusing the design.